1) blend mechanism
![点击朗读](/dictall/images/read.gif)
共混机理
1.
Microstructure and cross blend mechanism of nanometer ZnO/SBS modified asphalt;
![点击朗读](/dictall/images/read.gif)
纳米ZnO/SBS改性沥青微观结构与共混机理
2.
Cross blend mechanism of SBS modified asphalt based on infrared spectra;
![点击朗读](/dictall/images/read.gif)
基于红外光谱法的SBS改性沥青共混机理
2) physical blending
![点击朗读](/dictall/images/read.gif)
物理共混
1.
The emulsion was modified through IPN,chemical copolymerization and physical blending.
![点击朗读](/dictall/images/read.gif)
制备了丙烯酸酯乳液,探讨了丙烯酸、N-羟甲基丙烯酰胺、二乙烯基苯、丙烯腈和三聚氰胺等不同改性剂对乳液性能的影响,在此基础上通过互穿网络聚合、化学共聚及物理共混等方法对乳液的性能进行了改性研究。
2.
By means of physical blending a composite macromolecule material was produced using biomacromolecule as the raw material, in order to develop new materials of excellent properties.
为进一步探索和研制高性能生物材料,以生物大分子葡甘聚糖为原材料,利用物理共混法制成复合高分子生物材料,探讨了温度、时间、电解质各因素对材料稳定性的影响。
3.
This paper reviewed the methods for preparing polymers having broad molecular weight distribution via physical blending, radical polymerization, coordination polymerization and ionic polymerization, respectively.
分别对采用物理共混法、自由基聚合、配位聚合和离子聚合法制备宽分子量分布聚合物进行了综述。
3) mechanical blending
![点击朗读](/dictall/images/read.gif)
机械共混
1.
Effect of copolymerization and mechanical blending on performance of PMDA/ODA-polyimide
![点击朗读](/dictall/images/read.gif)
共聚与机械共混对PMDA/ODA型聚酰亚胺性能的影响
2.
The present paper summarized the methods for preparing alloys of polypropylene with other polyolefins through mechanical blending or synthesis in reactor.
对聚丙烯与其他聚烯烃的机械共混和反应器共混的方法及其共混合金的力学性能进行了综述,介绍了聚丙烯合金的最新发展。
3.
The polyvinyl chloride(PVC)/reclaimed acrylonitrile-butadiene rubber (RNBR)blended thermoplastic elastomer was prepared by mechanical blending at high temperature.
用PVC与NBR再生胶高温机械共混,制备了具有交联结构的、Tg约10℃的热塑性弹性体。
4) physical blending technology
![点击朗读](/dictall/images/read.gif)
物理共混法
5) mechanical blend
![点击朗读](/dictall/images/read.gif)
机械共混物
6) Coexistence mechanism
![点击朗读](/dictall/images/read.gif)
共存机理
补充资料:苯乙烯-丙烯腈共聚物/聚碳酸酯共混物
分子式:
CAS号:
性质:系由丙烯腈-苯乙烯共聚物与聚碳酸酯组成的共混物,可改善丙烯腈-苯乙烯共聚物的拉伸强度、热变形温度及冲击强度,并有较好的加工性能,耐溶剂性及耐候性,丙烯腈含量为25%的共聚物与聚碳酸酯共混可获得最好的综合性能,丙烯腈含量小于10%的共聚物与聚碳酸酯共混可得到透明材料,透光率可保持90%以上,机械共混法制取,可用于汽车仪表盘、挡泥板、其他外饰件及商用机器、电器制件等。
CAS号:
性质:系由丙烯腈-苯乙烯共聚物与聚碳酸酯组成的共混物,可改善丙烯腈-苯乙烯共聚物的拉伸强度、热变形温度及冲击强度,并有较好的加工性能,耐溶剂性及耐候性,丙烯腈含量为25%的共聚物与聚碳酸酯共混可获得最好的综合性能,丙烯腈含量小于10%的共聚物与聚碳酸酯共混可得到透明材料,透光率可保持90%以上,机械共混法制取,可用于汽车仪表盘、挡泥板、其他外饰件及商用机器、电器制件等。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条