1) compressive loading
压载荷
1.
In this paper, a detailed elastic-plastic finite element analysis of the effect of the different compressive loading on crack tip plasticity is studied.
应用弹塑性有限元方法,研究不同加载条件下压载荷对疲劳裂纹尖端塑性区的影响。
2) cut-in load
压入载荷
1.
Through analysis it is concluded that for a given rock and given tooth profile,the cut-in displacement(depth)is in a linear relationship with cut-in load,the volume of breaking pit decreases with t.
对试验结果进行分析,得到了围压作用下对于所试验的岩石和齿形,压入载荷和压入位移成线性关系;岩石破碎坑的体积随压入载荷的增加而减小;在以相同齿形压入相同岩石的条件下,岩石的破碎面积和体积随围压的增加而减小。
3) internal pressure load
内压载荷
1.
Numerical investigation and optimum design of complex thin-walled structures subject to internal pressure load;
内压载荷下复杂薄壁箱形结构数值模拟与优化设计
4) extrusion load
挤压载荷
1.
The influence of the curvature angle ψ of the outside corner on the extrusion load and the deformation uniformity was discussed.
运用有限元方法对纯铝的等径弯角挤压(ECAE)过程进行了模拟计算,探讨了挤压通道外接圆弧角ψ对挤压载荷及试样变形均匀度的影响。
6) buckling load
压曲荷载
补充资料：冲击波超压与动压