1.
Transverse compressive pre-stress method for controlling welding hot cracking of aluminum thin-plate
预置横向挤压载荷法防止铝合金薄板焊接热裂纹
2.
Study of the relationship between the load and indentation resistance of the conveyor belt
带式输送机橡胶挤压阻力与载荷的关系研究
3.
joint contact surface
连接接触面总压紧载荷
4.
Loading Transfer Behavior Experimental Study and Theoretic Analysis of Squeezed Branch Pile under Pulling Loading;
上拔荷载作用下挤扩支盘桩荷载传递规律的试验与理论分析
5.
The smallest load capable of maintaining the bar in a slightly bent form is called the critical or bucking load.
使杆保持稍微弯曲形状的最小载荷称为临界载荷或临界压曲载荷。
6.
Analysis of Estimating Ultimate Loading and Static Test of Screw Pile Under Inclined Loading
承压螺旋桩斜向荷载试验与极限荷载判定分析
7.
Finite Element Analysis of Cast-In-Situ Piles with Expanded Branches and Plates under Lateral Load;
水平荷载作用下挤扩支盘桩的有限元分析
8.
Research on Collapse Strength of Oil Casing under Non-uniform Loads
非均布载荷下石油套管抗挤强度问题研究
9.
ANALYSIS OF BEARING LOAD CHARACTERISTIC OF SQUEEZED BRANCH AND PLATE PILE GROUP FOUNDATION UNDER LATERAL LOAD
水平荷载下挤扩支盘桩群桩受力特性分析
10.
Collapsing Strength Analysis of Extra-heavy Wall Casing Under Nonuniform Loads
特厚壁套管在非均载荷下的抗挤强度分析
11.
Numerical Simulation on the Unidirectional Extruding Capacity of Downhole Casing
井下套管单向挤压承载能力数值模拟
12.
Bearing Capacity Experimental Study and Settlement Calculation of Cast-in-Situ Piles with Expanded Branches or Plates under Vertically Loading;
竖向荷载作用下挤扩支盘桩承载力试验研究和沉降计算
13.
Research Progress on the Project Behaviorof Pile under Pullout Loads;
挤扩支盘桩在上拔荷载作用下承载能力的试验研究
14.
A Study of Computation Model with Load-structure Method for Unsymmetrically Loaded Closely-spaced Tunnel;
偏压小间距隧道的荷载结构特性研究
15.
Calculate Approximately Critical Load of Tenuous Long Compressive Bar by Chart Multiplication Method;
细长压杆临界载荷的图乘法近似求解
16.
The Calculatiou of critical load by torsion angle-bending moment matix;
用转角弯矩矩阵确定压杆的临界荷载
17.
Simultaneous Topology and Shape Optimization of Pressure Loaded Structures
压力载荷下的结构拓扑-形状协同优化
18.
Strut-and-tie Model of Deep Beam Design Under Uniform Distributed Loads
均布荷载下深梁设计的压杆-拉杆模型