1) latex beads
乳胶珠
2) emulsion
乳胶
1.
The initiator is summarized in grafting copolymerization preparation emulsion with using starch and ethenyl monomer , each kind of initiator mechanism is commented, influence of the initiator selecting to the emulsion performance is elaborated.
总结了淀粉与乙烯基单体接枝共聚制备乳胶常用的引发剂,对各类引发剂的机理作了评述,讨论引发剂的选用对乳胶性能的影响。
2.
The process of manufacturing emulsion products and its capacity indexes have been analyzed in this paper.
本文分析了乳胶制品的生产过程，并对工序能力指数进行了分析，从而推断出产品的质量。
3.
Methods: A random, single blind, positive-control and multi-center clinical trial recruited 230 patients with osteoarthritis, who were randomly applied onto the affected area with either piroxicam patch (n = 116) once every other day or diclofenac emulsion (n = 114) three times per day for 14 days.
方法:研究采用多中心、随机、单盲、阳性药(双氯芬酸乳胶)平行对照。
3) latexes
乳胶
1.
The results show that the rate of polymerization increases with increasing emulsifier concentration, initiator concentration and temperature, the nucleation period finishes earlier and the particle average diameter of latexes is larger than the particle produced by traditional emulsion polymerization.
对反应性乳化剂作用下的醋酸乙烯酯(VAc)乳液聚合动力学体系进行了研究,实验结果发现,聚合速率随乳化剂、引发剂浓度、温度的增大而加快,乳胶粒平均直径较传统的的乳液聚合乳胶粒子大得多,且成核期结束较早。
4) latex adhesive
乳胶
1.
The polyacrylate latex adhesives have been synthesized to meet the requirements of the development of the coated abrasives products.
根据砂布磨具对胶粘剂的性能要求 ,合成了聚丙烯酸酯乳液胶粘剂 ;考察了共聚体系中各种原料的组合、配比及用量对乳胶机械性能的影响。
5) latex
乳胶
1.
The influence of the composition, ratio of network Ⅰ to network Ⅱ, the kinds and amounts of crosslinker on miscibility and damping properties of multicomponent latex interpenetrating polymer networks (LIPNs) were investigated with a rheovibron viscoelastometer.
用动态粘弹谱仪研究多组分乳胶ＩＰＮ’ｓ 体系网络的组成、配比、交联剂品种及用量等因素对体系相容性及阻尼性能的影响。
2.
The super microstructure of the outer coating of some natural latex catheters made in China and abroad with TEM was described.
用透射电镜（ＴＥＭ）观察研究了国内外几种天然乳胶导尿管外涂层的超微结构，并与其性能作了比较，结果表明，涂层的厚度和均匀度及对胶层的渗透程度直接影响产品的使用性能。
3.
Interpenetrating polymer networks(IPNs)of poly (Methyl methacrylate)and poly(n-Butyl acralate)have synthesized inlatex form.
借助动态粘弹仪和透射电镜,着重研究了PMMA/PnBA乳胶IPNs体系的相容性,乳胶颗粒的形态和动态力学性能之间的关系,同时也探讨了对它们产生影响的一些因素。
6) natural latex
乳胶
1.
The different contents of nano SiO x surface actively modified with complex dispersants were homogeneously dispersed in the macro expansion natural latex.
通过用复合分散剂对纳米SiOx进行表面改性处理后 ,将不同份数的纳米SiOx均匀分散于微发泡天然乳胶配方材料中 ,经硫化后 ,对其力学性能所受到的影响做了相应的研究。
2.
Hence, the antibacterial natural latex has been researched for expanding its applications in the filed of biology medical area.
天然乳胶由于其优良的性能已被广泛应用于医疗领域。
参考词条
补充资料：大叶紫珠 - 紫珠叶
【通用名称】
大叶紫珠 - 紫珠叶
【其他名称】
紫珠叶 Folium Callicarpaae Macrophyllae (英)Bigleaf Beautyberry Leaf
【别名】
大风叶、白狗肠、大叶紫珠。
【来源】
为马鞭草科植物大叶紫珠Callicarpa macrophylla vahl的叶。
【植物形态】
灌木或小乔木，幼枝被灰白色长茸毛。叶对生，长椭圆形至椭圆状披针形，上面有短柔毛，老时稍粗糙，下面密被灰白色茸毛，两面有不明显的金黄色腺点，聚伞花序5～7次分歧，总花梗长2～4cm；花萼4齿裂，被星状柔毛；花冠紫色，管状，先端4裂，略被细毛；雄蕊4；子房上位，4室。浆果状核果，小球形，有腺点，熟时紫红色。花期夏季。 生于山坡 、路旁、疏林中。产于广东、广西、云南、贵州。
【采制】
夏、秋季采叶，晒干或鲜用。
【性状】
叶多卷曲、皱缩，有的破碎。完整者展平后，长椭圆形至椭圆状披针形，长15～30cm，宽5～11cm，先端渐尖，边缘有锯齿，上面有短柔毛，下面密被灰白色茸毛。气微，味微苦。
【化学成分】
含紫珠萜酮（calliterpenone）、木犀草素、芹菜素、大波斯菊甙（cosmosiin）、木犀草甙。
【性味】
性平，味微辛、苦。
【功能主治】
止血消炎，散瘀消肿。用于胃及十二指肠贵疡出血、外伤出血、衄血、齿龈出血、扭伤肿痛、化脓性皮肤溃疡、烧伤、流感。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。