1) white emulsion
白乳胶
1.
Discuss on increasing solid content of white emulsion;
提高白乳胶固含量因素的探讨
2.
Poly(vinyl acetate) (white emulsion) was prepared by radical oxidation-reduction system at room temperature.
采用自由基氧化还原引发体系引发醋酸乙烯酯在室温下聚合制备聚醋酸乙烯酯乳液(俗称白乳胶),并与传统的热引发体系进行了比较。
3.
By improving the process of production and adding modification agent, a new kind of white emulsion was produced.
改进普通白乳胶的生产工艺 ,添加改性剂等原料组份 ,能成功地生产出一种低温下不胶凝的改性白乳胶。
2) white glue
白乳胶
1.
Modification of white glue with vinyl butenoate;
丁烯酸乙烯酯用于白乳胶的改性
2.
Application of α-pinene as comononer in the preparation of white glue;
α-蒎烯作为共聚单体用于白乳胶的制备
3.
Study On grafting copolymerization of vinyl acetate onto starch acetate to prepare white glue;
淀粉醋酸酯与醋酸乙烯接枝共聚制备白乳胶
3) white latex
白乳胶
1.
Preparation of bamboo charcoal-white latex composite board;
竹炭—白乳胶复合板的研制
2.
Oxidized starch adhesive and white latex are two environment friendly adhesives widely used at present in corrugated board.
研究了在氧化淀粉胶粘剂中加入一些环保型的高分子助剂,通过对氧化淀粉粘合剂耐水性、粘合强度、稳定性等测试,得出最佳配方,并与白乳胶的性能进行了对比分析。
3.
Methods: As the agent of adhibiting tissue section, white latex and glutin were used in the immunohistochemical process of celloidin section.
方法 :选用市售白乳胶、明胶作为粘片剂 ,观察火棉胶切片经过免疫组化染色程序处理后的脱片及染色情况。
4) PVAC emulsion
白乳胶
1.
During the manufacture of PVAC emulsion,fuuctional monomers (acrylic acid) were added for copolymcrization in order to improve the adhesion strength and freezing resistance of the emulsion.
本工作研究了在白乳胶生产过程中引入功能性单体(丙烯酸)参加共聚,从而提高了乳化胶的粘接强度和防冻性能。
5) Po1yvinyl acetate emulsion
乳白胶
6) control latex
空白胶乳
补充资料：白乳胶
聚醋酸乙烯乳液是由醋酸乙烯经乳液聚合后加入邻苯二甲酸二丁酯增塑剂而得，外观为乳白色粘稠状流体，俗称白乳胶，简称PVAc固含量为45%～50％，粒径范围100～1000nm。PH值4～5。粘度＞5000mPa·s。残留单体<1％。灰分＜3％。玻璃化温度大于28℃。最低成膜温度15℃。聚醋酸乙烯乳液粘接性强、稳定性好、价格低廉，其缺点是耐水性差，胶膜脆性较大。无毒，不燃。
用作木材、织物、纸品等的胶粘剂，配制腻子，与脲醛树脂混合使用，改善性能，可作为淀粉胶粘剂的稳定剂．
贮存于温度为5～30℃的库房内，贮存期为6个月。
用作木材、织物、纸品等的胶粘剂，配制腻子，与脲醛树脂混合使用，改善性能，可作为淀粉胶粘剂的稳定剂．
贮存于温度为5～30℃的库房内，贮存期为6个月。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条