1)  azone
月桂氮酮(氮酮)
2)  myrcia,noble laurel,grecian laurel
月桂
3)  lauric acid
月桂酸
1.
Synthesis of lauric acid imidazoline boric acid ester;
月桂酸咪唑啉硼酸酯的合成
2.
Study on the new process for hydrolyzing Litsea Cubeba(Lour.) Pers. Kernel oil and for obtaining Lauric acid;
山苍子核仁油水解新工艺及月桂酸的单离研究
3.
Synthesis of polyethylene glycol(400 ,600)monoesters of lauric acid;
月桂酸聚乙二醇单酯的合成
4)  sodium laurate
月桂酸钠
1.
Organic surface modification of attapulgite with sodium laurate;
月桂酸钠有机表面改性凹凸棒石
2.
Using sodium laurate as modification agent,process conditions were investigated and the modification results were analyzed by means of the activation indices.
对以月桂酸钠作改性剂进行了工艺条件的研究,用活化指数对改性效果进行了评价。
3.
A technique of simultaneous quantitative determination of sodium laurate (SL) and sodium dodecyl bezene sulfonate (SDBS) in mixed solutions is developed by using high performance liquid chromatorgraphy (HPLC).
建立了用高效液相色谱法同时测定月桂酸钠(SL)和十二烷基苯磺酸钠(SDBS)浓度的方法。
5)  lauryl alcohol
月桂醇
1.
Synthesis of the sodium phthalate of mono lauryl alcohol;
邻苯二甲酸单月桂醇酯钠盐的合成
2.
Synthesis of high selectivity monododecylphosphate by esterification of lauryl alcohol;
月桂醇高选择性酯化合成单十二烷基磷酸酯
3.
Alkyl polyglucosides were prepared from glucose and lauryl alcohol by one step reaction using p-toluenesulfonic acid and dodecyl benzene sulfonic acid as catalysts respectively.
分别采用对甲苯磺酸和十二烷基苯磺酸为催化剂进行了一步法由葡萄糖和月桂醇制备烷基糖苷的工艺研究。
6)  lauroyl chloride
月桂酰氯
1.
Then furoin reacted with acetyl chloride,lauroyl chloride,benzoyl chloride,α-furoyl chloride or 3-α-furylacryloyl chloride to form the corresponding monoester compounds Ⅰ~Ⅴ with pyridine as catalyst and solvent in a water bath of 30~40 ℃.
以糠醛为基础原料,经维生素B1催化合成糠偶姻,再由糠偶姻分别和乙酰氯(Ⅰ),月桂酰氯(Ⅱ),苯甲酰氯(Ⅲ),α-呋喃甲酰氯(Ⅳ),3-α-呋喃烯丙酰氯(Ⅴ)反应,吡啶为催化剂和溶剂,在30-40℃的水浴条件下合成了相对应的糠偶姻单酯类化合物。
2.
Furoin was synthesized from furol with VB1 as the catalyst,which was then reacted with acetyl chloride,lauroyl chloride,benzoyl chloride,α-furoyl chloride and 3-α-furyl acryloyl chloride,respectively;corresponding monoester compounds of furoin were synthesized in THF in the presence of sodium hydroxide under reflux.
以糠醛为基础原料,经维生素B1催化合成糠偶姻,再由糠偶姻分别和乙酰氯、月桂酰氯、苯甲酰氯、α-呋喃甲酰氯和3-α-呋喃烯丙酰氯反应,在NaOH/无水THF体系中,于水浴回流条件下合成了相对应的糠偶姻单酯类化合物。
参考词条
补充资料:氮蒽酮
分子式:C13H9NO
分子量:195.220
CAS号:578-95-0

性质:黄色针状或片状结晶。熔点361-362℃。能溶于热乙酸、热醇、氢氧化钾和醇溶液,不溶于水、醚、苯和氯仿。在醇溶液中显蓝色荧光。

制备方法:由邻氯苯甲酸和苯胺反应生成二苯胺-2-羧酸(即邻苯氨基苯甲酸或N-苯基氨茴酸),再在浓硫酸中脱水环合而得。在装有蒸馏装置和搅拌器的250ml三颈烧瓶中,加入10g(0.064mol)邻氯苯甲酸,10g碳酸钾,40ml(0.42mol)苯胺和0.1g新制备的铜粉。将混合物搅拌、加热,慢慢将反应产生的水蒸出来。约需3h。然后用水蒸气蒸馏法蒸出未反应的苯胺。将剩余物加活性炭脱色过滤。滤液中加入浓盐酸使结晶析出,冷却,滤出结晶,用少量冷水洗涤抽干。粗品用乙酸和乙醇重结晶,熔点为183-184℃。把5g邻苯氨基苯甲酸与35ml浓硫酸混合,在水浴上加热3h。冷却后,在强烈搅拌下加入40ml冰水.滤出沉淀。将它加到300ml2.5%的碳酸钠溶液中,加热,过滤,用水洗涤后干燥,即得吖啶酮。

用途:有机合成。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。