1) Thermocoagulation
[英][,θə:məukəuæɡju'leiʃən] [美][,θɚmoko,æɡjə'leʃən]
热凝
2) heat transfer and solidification
传热凝固
1.
Under conditions of a slab caster and the working tip structure of SEN used,comprehensive mathematical description and simulation concerning fluid flow of liquid steel,fluctuation of bath surface and heat transfer and solidification of steel were performed.
结合连铸机设备工艺条件和所采用浸入式水口结构进行了结晶器内钢水流动、自由液面以及传热凝固等冶金现象的综合描述和数值分析。
2.
For CSP thin slab caster at Zhujiang Steel,a comprehensive mathematical simulation concerning fluid flow,fluctuation of bath surface,heat transfer and solidification of melt was performed with given SEN and measured heat fluxes.
基于珠钢CSP薄板坯连铸机设备工艺条件和所采用扁平浸入式水口结构,结合铜板测温导出的热流密度分布进行了漏斗形结晶器内钢水流动、自由液面以及传热凝固等冶金现象的综合描述和数值分析。
3) curdlan
热凝胶
1.
Study on the Fermentation and Metabolic Characteristics of Microbial Polysaccharide-Curdlan in CSTR;
微生物多糖热凝胶在CSTR反应器中的发酵与代谢特性研究
2.
Advances in curdlan of production by Alcaligenes faecalis and function of curdlan
热凝胶的高产策略及功能研究进展
3.
The influence of drying methods and temperature on curdlan product quality was investigated in this poper.
研究了热凝胶生产过程中干燥方法和温度对产品品质的影响。
4) condensation heat
凝结热
1.
The thermodynamic law between the condensation heat and vaporization heat as well as between the reaction heat and vaporization heat is studied during low temperature oxidation of low rank using pulse calorimeter.
采用pulsecalorimeter仪器,分别研究了低温下低阶煤在湿的氮气气氛下凝结热与蒸发热间的热力学规律,以及在湿的氧气气氛下反应热与蒸发热间的热力学规律;还研究了低阶煤在干燥氧气下经三次低温氧化反应的热力学规律。
5) heat-induced gel
热致凝胶
1.
① Group of protein component,the formation condition and part properties of heat-induced gel of 11S protein and 7S protein were studied,respectively.
按照大豆蛋白质的构成,可以把11S和7S蛋白质凝胶特性的研究相对划分为3种类型:①蛋白质组分类型,研究11S和7S蛋白质热致凝胶的形成条件和部分特性;②分离蛋白类型,研究以11S和7S蛋白质为主要成分的大豆分离蛋白(SPI)凝胶特性;③蛋白质亚基类型,研究11S和7S蛋白质亚基的结构与凝胶形成机理的关系。
6) Solidification and heat transfer
凝固传热
1.
Changeable space FDM for solidification and heat transfer of rectangular billet in continuous casting;
矩形连铸坯凝固传热的变间距有限差分模拟
2.
Numerical simulation of solidification and heat transfer in the mold for the bloom caster in Baotou Iron and Steel Co.;
包钢大方坯连铸机结晶器凝固传热的数值模拟
3.
Research and application of solidification and heat transfer for liquid steel in mould of SPHC;
SPHC连铸结晶器内钢水凝固传热的研究与应用
补充资料：热凝固剂
分子式：
CAS号：
性质：又称热感剂，热凝固剂。常温下不改变胶乳的稳定性，当加热到一定温度时能使胶乳迅速凝聚的物质。通常包括聚乙烯甲基醚、聚醚聚甲醛缩二甲醇、聚丙二醇、锌铵络合物、胰蛋白酶、木瓜酶等。
CAS号：
性质：又称热感剂，热凝固剂。常温下不改变胶乳的稳定性，当加热到一定温度时能使胶乳迅速凝聚的物质。通常包括聚乙烯甲基醚、聚醚聚甲醛缩二甲醇、聚丙二醇、锌铵络合物、胰蛋白酶、木瓜酶等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条