1) Thermal coagulation
热凝固
1.
Pathological changes and thermal coagulation of human liver tissue induced changes in the optical penetration depths in vitro;
人肝病变和热凝固导致组织的光穿透深度变化
2.
Experimental study on thermal coagulation in ex-vivo porcine liver with a water-cooled microwave antenna;
水冷式微波天线热凝固离体猪肝的实验研究
3.
Pathological changes and thermal coagulation of human liver tissue induced changes of the optical properties of liver tissue at 532 and 1064 nm wavelengths of laser in vitro.
研究了人肝的病变及热凝固的肝组织对532 nm和1064 nm激光的光学特性的变化。
2) heat transfer and solidification
传热凝固
1.
Under conditions of a slab caster and the working tip structure of SEN used,comprehensive mathematical description and simulation concerning fluid flow of liquid steel,fluctuation of bath surface and heat transfer and solidification of steel were performed.
结合连铸机设备工艺条件和所采用浸入式水口结构进行了结晶器内钢水流动、自由液面以及传热凝固等冶金现象的综合描述和数值分析。
2.
For CSP thin slab caster at Zhujiang Steel,a comprehensive mathematical simulation concerning fluid flow,fluctuation of bath surface,heat transfer and solidification of melt was performed with given SEN and measured heat fluxes.
基于珠钢CSP薄板坯连铸机设备工艺条件和所采用扁平浸入式水口结构,结合铜板测温导出的热流密度分布进行了漏斗形结晶器内钢水流动、自由液面以及传热凝固等冶金现象的综合描述和数值分析。
3) Solidification and heat transfer
凝固传热
1.
Changeable space FDM for solidification and heat transfer of rectangular billet in continuous casting;
矩形连铸坯凝固传热的变间距有限差分模拟
2.
Numerical simulation of solidification and heat transfer in the mold for the bloom caster in Baotou Iron and Steel Co.;
包钢大方坯连铸机结晶器凝固传热的数值模拟
3.
Research and application of solidification and heat transfer for liquid steel in mould of SPHC;
SPHC连铸结晶器内钢水凝固传热的研究与应用
4) heat transfer
凝固传热
1.
Numerical Simulation and Control of Heat Transfer in Continuous Casting Process;
连铸凝固传热全过程数值模拟与控制
2.
Based on the mathematical model of heat transfer in slab continuous casting process, the MSC Marc is adopted to simulate the temperature field and solidification of continuous casting process, and the result of simulation is analyzed.
在建立板坯连铸凝固传热数学模型的基础上,采用有限元软件MSCMarc对国内某板坯连铸机的凝固过程进行模拟,并对其仿真结果进行分析。
5) solidification heat transfer
凝固传热
1.
The mathematic model of solidification heat transfer process in continuous casting strand is useful for quantitatively analyzing heat transfer in continuous casting process,quality control and process control.
连铸坯凝固传热数学模型对定量分析连铸过程中的热量传递、改善连铸坯质量及实现过程级的动态控制有重要意义。
2.
According to the theory of heat transfer and solidification, we study the solidification heat transfer of dynamic casting process in slab continuous casting.
根据凝固传热理论,对板坯连铸动态拉坯过程中凝固传热进行研究,通过选择合适的拉速、比水量、过热度等工艺参数得到均匀稳定的温度分布,从而可以有效地改善铸坯内部质量。
3.
The mathematic model of solidification heat transfer process in continuous casting strand is useful for quantitatively analyzing heat transfer in continuous casting process,quality control and process control.
连铸坯凝固传热数学模型对定量分析连铸过程中的热量传递、改善连铸坯质量及实现过程级的动态控制有重要意义。
6) solidification latent heat
凝固潜热
1.
Mathematical model of solidification latent heat under high cooling rate;
快速冷却条件下凝固潜热处理模型的研究
补充资料：热凝固剂
分子式：
CAS号：
性质：又称热感剂，热凝固剂。常温下不改变胶乳的稳定性，当加热到一定温度时能使胶乳迅速凝聚的物质。通常包括聚乙烯甲基醚、聚醚聚甲醛缩二甲醇、聚丙二醇、锌铵络合物、胰蛋白酶、木瓜酶等。
CAS号：
性质：又称热感剂，热凝固剂。常温下不改变胶乳的稳定性，当加热到一定温度时能使胶乳迅速凝聚的物质。通常包括聚乙烯甲基醚、聚醚聚甲醛缩二甲醇、聚丙二醇、锌铵络合物、胰蛋白酶、木瓜酶等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条