1) Ti and TiN modification
钛与氮化钛修饰
2) Titanium carbonitride
碳(氮)化钛
3) TiN
[英][tɪn] [美][tɪn]
氮化钛
1.
Study on Super-fine Particle of TiN Added into Molten Pure Iron;
高温纯铁熔体中外加氮化钛超细颗粒的研究
2.
Preparation Methods of TiN Hard Films;
氮化钛硬质薄膜的制备方法
3.
Study on Corrosion Resistance Improvement of TiN Ceramic Process of Carbon Steel Surface;
碳钢表面氮化钛陶瓷化的耐腐蚀性能研究
4) titanium nitride
氮化钛
1.
Study on preparation and reaction mechanism of titanium nitride powder;
氮化钛粉体制备及反应机理的研究
2.
Study on Process of Titanium Nitride Deposition onto Gears and Effects on Load-Carrying Ability of Gears;
氮化钛涂层的齿面制备工艺及其对齿轮承载能力的影响
3.
Titanium nitride films were grown by unbalanced magnetron sputtering on substrates of Si(100) and Ti alloy at different partial pressure ratios of N_2 and Ar and at different target substrate separations.
本文利用非平衡磁控溅射技术,通过改变薄膜沉积时氮气和氩气分压比(PN/PAr)和靶基距,在Si(100)和钛合金(Ti6A14V)基体上制备了氮化钛薄膜。
5) Ti(C,N)
碳氮化钛
1.
Effect of Ti(C,N) on properties of low-carbon MgO-C brick;
碳氮化钛对低碳镁碳砖性能的影响
2.
Effect of Ti(C,N) content on properties of low carbon MgO-C brick;
碳氮化钛的加入量对低碳镁碳砖性能的影响
3.
The conclusions are given as following: it's impossible to form pure TiN When there is solid carbon in the slag Fe interface, but Ti(C,N) can be formed, contained TiN amount increases with pressure of Nitrgon in the slag Fe int erface.
由热力学计算结果分析了高炉冶炼含ＴｉＯ_2铁矿时钛的物理化学行为，指出：有固体碳存在 时，渣铁界面不可能有纯ＴｉＮ生成，应该析出Ｔｉ（Ｃ，Ｎ）固溶体，其中ＴｉＮ含量随着渣铁界面处氮分压 值的增加而增加；生铁合钛量主要受形成碳氮化钛的反应所控制，与渣中ＴｉＯ_2含量无关；温度低， 有利于限制 Ｔｉ（Ｃ，Ｎ）的析出，“低硅钛”操作是合理的。
6) titanium carbonitride
氮碳化钛
1.
The main preparation technologies of titanium carbonitride coating are reviewed in the present paper.
氮碳化钛涂层具有优良的力学及摩擦学性能,作为硬质耐磨涂层,已广泛用于切削刀具、钻头和模具等,具有广阔的应用前景。
2.
Titanium carbonitride coating has excellent mechanical and tribological properties.
氮碳化钛涂层有优良的力学及摩擦学性能,作为硬质耐磨涂层,它已广泛用于切削刀具、钻头和模具等场合,具有广泛的应用前景。
补充资料：5t钛还原蒸馏炉(遵义钛厂)
5t钛还原蒸馏炉(遵义钛厂)
5t钛还原蒸馏联合炉(遵义钛厂)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条