1) sulfonated polyethylene
磺化聚乙烯
1.
The sulfonated polyethylene hollow fiber ion-exchange membranes with different ionexchange capacity (IEC) were prepared by heterogeneous photochemical chlorosulfonation reaction.
其中尤以磺化聚乙烯离子交换膜最为显著。
2) CSM
氯磺化聚乙烯
1.
Influence of TCY as Curing Agent on the Properties of NBR/CSM Blend;
硫化剂TCY对丁腈橡胶/氯磺化聚乙烯共混物性能的影响
2.
Study on CSM/SBR Blend;
氯磺化聚乙烯/SBR共混物的研究
3.
Relationship between Crystallinity of CSM Vulcanizate and Vulcanization Time;
氯磺化聚乙烯硫化胶结晶度与硫化时间的关系
3) chlorosulfonated polyethylene
氯磺化聚乙烯
1.
Conductive polyaniline/chlorosulfonated polyethylene composites prepared by in situ emulsion polymerization and their properties;
原位乳液聚合制备导电性聚苯胺/氯磺化聚乙烯复合材料及其性能
2.
Development of water chlorosulfonated polyethylene anti-corrosion coatings;
水性氯磺化聚乙烯防腐蚀漆的研制
3.
Determination of carbon tetrachloride in the production of chlorosulfonated polyethylene by gas chromatography;
气相色谱法监测氯磺化聚乙烯生产过程中四氯化碳含量
4) sulfonated polystyrene
磺化聚苯乙烯
1.
The sulfonated polystyrene (SPS) has been prepared by sulfonation reaction of the polystyrene, which is used as a filtrate reducer for oil well cement slurry.
通过磺化改性,制备了磺化聚苯乙烯(SPS)作为油井水泥降失水剂。
2.
Water borne emulsions of lightly sulfonated polystyrene ionomer(SPS) were prepared by phase inversion technique.
将聚苯乙烯磺化制成聚苯乙烯离聚体 (SPS) ,利用相反转技术 ,将磺化聚苯乙烯离聚体制成具有纳米级稳定的水基微乳液 ,利用 SPS微粒核为反应场所 ,引发另一单体 MMA聚合 ,制备具有相互缠结结构的 PMMA/ SPS复合水基微乳液。
3.
The complexation behavior of sulfonated polystyrene (SPS) containing 9.
采用粘度，差示扫描量热法研究了磺化聚苯乙烯（ＳＰＳ）与甲基丙烯酸甲酯－４－乙烯基吡啶共聚物（ＭＭＡ４ＶＰ）所形成的离子复合物。
5) SPS
磺化聚苯乙烯
1.
In this work, the polystyrene was modified to sulfonated polystyrene ionomer(SPS) and was emulsified to a stable polymer waterborne emulsion by using the technology of phase inversion.
将聚苯乙烯制成磺化聚苯乙烯离聚体,利用相反转技术,将磺化聚苯乙烯离聚体制成具有纳米级稳定的水基微乳液,利用磺化聚苯乙烯颗粒内部作为反应场所,引发另一单体丙烯酸丁酯聚合,制备聚丙烯酸丁酯/磺化聚苯乙烯复合水基微乳液。
2.
The polystyrene was modified to sulfonated polystyrene ionomer (SPS) which was emulsified to waterborne emulsion by using the technology of phase inversion.
利用相反转技术制备磺化聚苯乙烯(SPS)水基微乳液,研究发现,通过选择溶剂和控制混合溶剂的组成,可制备不同颗粒形态结构的SPS水基微乳液,并研究了相反转过程、乳液稳定性与混合溶剂组成之间的关系。
3.
he morphology and thermal property of sulfonated polystyrene (SPS) and its ionomers were studied through DSC, DMA, TEM, SAXS and TGA.
通过ＤＳＣ、ＤＭＡ、ＴＥＭ、ＳＡＸＳ和ＴＧ对ＳＰＳ（磺化聚苯乙烯）及其离聚体的形态结构和热性能进行了研究。
6) chlorsulfonated polyethylene
氯磺化聚乙烯
1.
A series of rubber coatings were prepared by chlorsulfonated polyethylene and other auxilicury agents,then coating them on different kinds of rubber and testing correspond performance respectively.
以氯磺化聚乙烯为基料 ,辅以各种助剂 ,制成了一系列橡胶涂层 ,并在几种常用橡胶表面进行了涂敷和相应的耐老化性能测试 ,结果表明所制成的涂层是一种综合性能优异的橡胶防老化涂层。
2.
The new type of emulsive elastic waterproof coating is made of Chlorsulfonated Polyethylene and butadiene styrene emulsion,emulsifying agent,plasticizer,and fly ash,etc.
介绍了以氯磺化聚乙烯和丁苯等乳液为基料 ,以粉煤灰为填料的新型乳液弹性防水涂料的组成及特点 。
3.
The new type of emulsive elastic waterproof coating is made of Chlorsulfonated Polyethylene and butadiene styrene emulsion, emulsifying agent, plasticizer and fly ash, etc.
Ｆ－ＣＳ乳液弹性防水涂料是以氯磺化聚乙烯、丁苯及自制乳液为基料，以粉煤灰为填料，并添 加适当助剂配制而成的新型乳液弹性防水涂料。
补充资料：氯磺化聚乙烯防腐漆
分子式：
CAS号：
性质：以氯磺化聚乙烯为主要成膜物质的防腐蚀漆。漆固化后涂膜对氧化剂、臭氧和紫外光稳定，户外保色性好，耐酸碱，但抗渗性弱。使用温度以120℃为上限。配漆时可加环氧或煤焦油，以提高防腐和耐酸性。因本身为弹性材料，又耐候、耐腐蚀，故适用作硬质基体如金属、混凝土的防腐蚀涂层，也适用于软质基体如橡胶、塑料、织物的表面保护。
CAS号：
性质：以氯磺化聚乙烯为主要成膜物质的防腐蚀漆。漆固化后涂膜对氧化剂、臭氧和紫外光稳定，户外保色性好，耐酸碱，但抗渗性弱。使用温度以120℃为上限。配漆时可加环氧或煤焦油，以提高防腐和耐酸性。因本身为弹性材料，又耐候、耐腐蚀，故适用作硬质基体如金属、混凝土的防腐蚀涂层，也适用于软质基体如橡胶、塑料、织物的表面保护。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条