1)  blend
共混橡胶
2)  mixing
共混
1.
Study on the Feasibility of Fiber Formation by Mixing Chitosan and Poly(()vinylalcohol);
壳聚糖与聚乙烯醇共混成纤的可行性研究
2.
The four methods to improve melt strength of PP includes using high melt strength PP,PP crosslinking,PP mixing modification and PP/nanocomposites.
重点概述了提高PP熔体强度的4种方法,即采用高熔体强度PP、PP部分交联、PP共混改性及PP/无机物复合材料,并分别介绍了这4种方法的国内外研究进展、特点。
3.
During the process of vinyl silicone rubber's mixing and curing,it owned the ability to achieve insert synthesization with MMT.
采用机械共混原位插层法制备乙烯基硅橡胶/蒙脱土纳米复合材料,在乙烯基硅橡胶混炼和硫化过程中实现与蒙脱土的插层复合。
3)  blending
共混
1.
Study on blending of polyacrylonitrile and thiocyanate intercalated layered double hydroxide;
PAN与硫氰酸根插层水滑石共混体系初探
2.
Study on the feasibility of chitosan and gelatin blending for forming fiber;
壳聚糖明胶共混成纤的研究
3.
Progress in Research on Technology of PP Microcellular Foaming by Blending HDPE;
HDPE共混PP微孔发泡技术研究进展
4)  blend
共混
1.
Preparation of PVDF/TPU Blend Hollow Fiber Membranes for Treatment of Dyestuff Wastewater;
用于处理染料废水的PVDF/TPU共混中空纤维膜的制备
2.
Study on the chloroprene rubber/acrylate rubber blend;
氯丁橡胶/丙烯酸酯橡胶共混研究
3.
Study on polyurethane/polyvinylidene fluoride blend hollow fiber membrane prepared by melt spinning;
熔纺PU/PVDF共混中空纤维膜研究
5)  blends
共混
1.
Compatibility of Toughening Phase in Reactor-Made Polypropylene Blends;
聚丙烯反应器共混合金中增韧成分的相容性
2.
Process and thermal stability of 4-PPM-PPA blends;
4-炔丙氧基苯基马来酰亚胺共混改性聚芳基乙炔
3.
Study on the crystallization and crystal morphologies of PTT/PBT blends;
PTT/PBT共混体系结晶及晶貌形态的研究
6)  polyblend
共混
1.
Soybean protein /viscose polyblend fiber and its properties;
大豆蛋白/粘胶共混纤维及其性能
2.
The chitosan-gelatin-hyaluronic acid membranes were prepared via surface modification and polyblend methods respectively through co-crosslinking with 1-Ethyl-(3,3-dimethylaminopropyl) carbodiiminde(EDC) and N-hydroxysuccinimide (NHS) in 2-morpholinoethane sulfonic acid(MES)buffer.
本实验采用表面修饰法和共混法两种不同的方法将透明质酸引入壳聚糖- 明胶体系,制备了壳聚糖- 明胶-透明质酸复合薄膜,考察了薄膜的表面形貌、亲水性和力学性能等理化性能以及生物相容性。
参考词条
补充资料：丙烯腈-丁二烯-苯乙烯共聚物/聚氨酯橡胶共混物
分子式：
CAS号：

性质： ABS与PU经适当共混得到的新型高分子材料，共混时需要加入增容剂。此种共混料兼有聚氨酯的良好抗冲性、耐磨性和ABS的刚性、综合性能优良及价格低廉等特点。其性能随两组分比例不同而变化。随聚氨酯含量上升，其抗冲性能及熔体流动速率逐渐提高，耐磨性也越好，而拉伸强度、硬度及热变形温度则降低，以Prevail为例，密度1.09～1.12g/cm3，拉伸屈服强度24.5～35.7MPa，弯曲模量350～756MPa，悬臂梁缺口冲击不断裂，热变形温度(0.46MPa)57.2～77.8℃，1.82MPa时为44.5～62.8℃。机械共混法制备，适于制造汽车零件、轮胎结构件、皮带轮、低负荷齿轮、垫圈、汽车仪表板、保险杠、侧挡板、行李箱、家具扶手等。可用热成型、注射成型或挤出成型等方法加工。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。