1) Al_2O_3/Co advanced ceramic
Al_2O_3/Co新型陶瓷
2) new-type ceramics
新型陶瓷
1.
This paper introduces basic concept and new sintering principle of new-type ce- ramics materials,and conducts analyse and study to property of new-type ceramics,the study indi- cated that it is feasible that the new-type ceramics which are used to design and manufacture io- dine salt packer mechanical spares replace metal materials.
文章介绍了新型陶瓷材料的基本概念和新的烧结原理,对新型陶瓷的性能进行了分析研究。
3) ATC composite ceramic
Al_2O_3-TiC-Co复合陶瓷WC-Co硬质合金
4) alumina ceramic
Al_2O_3陶瓷
1.
The conventional alumina ceramic is difficult to obtain full density due to its low sinterability, so the material is very brittle and is limited in the application.
Al_2O_3陶瓷是一种重要的抗氧化、抗腐蚀的高温结构陶瓷材料。
2.
In order to meet the urgent requirement of enhancing wear-resistant of mechanical equipment in metallurgy, chemical and power industry, active brazing of alumina ceramics to 16Mn steel was carried out using investigated Ag-Cu eutectic+TiH_2 active powder brazes.
本文针对冶金、化工、电力等行业中,对于提高机械设备耐磨性的迫切要求,通过在Ag-Cu共晶钎料中添加TiH_2活性粉末,进行Al_2O_3陶瓷与16Mn钢的钎焊连接。
6) Al_2O_3 Ceramic
Al_2O_3陶瓷
1.
Experimental Study of Laser Milling on Al_2O_3 Ceramic;
Al_2O_3陶瓷的激光铣削试验研究
2.
Based on the composite depositing technology by the arc-added glow discharge, the composite target was used to deposit Cu and Ti alloy on the Al_2O_3 ceramics surface, realizing the surface alloying of A1_2O_3 ceramics.
基于加弧辉光复合渗镀技术,采用自行研制的复合靶对Al_2O_3陶瓷表面进行Cu、Ti复合渗镀,实现了Al_O_3陶瓷表面合金化。
3.
In brazing of Al_2O_3 ceramic and nickel, filler metal couldn’t fully metal below 1000℃.
研究发现活性钎焊法钎焊Al_2O_3陶瓷和金属Ni,1000℃以下由于钎料熔化不充分,接头质量较差。
补充资料：Co-Cr-Al-Y coatings
分子式：
CAS号：
性质：以钴、铬、铝和少量稀土元素钇为主要成分的一类覆盖型高温防护涂层。有优良的抗高温腐蚀性能，常用作镍基高温合金的抗腐蚀涂层，例如燃气轮机涡轮叶片防护层。可采用物理气相沉积、阴极溅射、等离子喷涂等方法进行涂覆。
CAS号：
性质：以钴、铬、铝和少量稀土元素钇为主要成分的一类覆盖型高温防护涂层。有优良的抗高温腐蚀性能，常用作镍基高温合金的抗腐蚀涂层，例如燃气轮机涡轮叶片防护层。可采用物理气相沉积、阴极溅射、等离子喷涂等方法进行涂覆。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条