1) ejector
脱模装置
2) demoulding device
脱模装置
1.
In order to realize the demoulding of the inner_circular_slot core of the injection mould for inner_circular_slot PVC tubes, a new demoulding device was designed by adopting the cross_section_typed inner_circular_slot core structure with a radially sliding block, applying the plate_shaped cam_set mechanism theory, and loosing the core hydraulically from inside.
为了实现内环槽PVC管件注射模中内环槽型芯的脱模 ,采用带径向滑块的剖分式内环槽型芯结构 ,运用盘形凸轮副机构原理 ,设计了一种新型的液压内抽芯脱模装置。
3) demoulding
脱模
1.
Development of two-step demoulding mechanism at side slide block of injection mould;
注射模侧滑块二级脱模机构设计
2.
Using the self setting resin sand to clean the inner surface instead of sodium silicate sand can hugely shorten the time of whole demoulding course,improve work efficiency and decrease working strength.
内腔用树脂自硬砂代替水玻璃砂,大大缩短了整个脱模过程的时间,提高了工作效率,降低了职工的工作强度。
3.
In consideration of the difference between two parts,insert blocks on moving half and fixed half were combined;and the compounded core-pulling of slanted pushing rod,dog-leg cam and slide block was applied to finish the demoulding of internal and external side concave.
介绍了1副在同1副模具中注射成型2个差异性较大的塑件的模具结构,该模具设计时综合考虑了2个塑件的差异性,分别采用了动、定模镶块组合的结构形式,并使用斜推杆、弯销与滑块复合抽芯来完成内外侧凹脱模。
4) demolding
脱模
1.
Three ways for demolding of plastic part with internal circle undercut;
整圆内侧倒扣塑件的3种脱模方式
2.
Study of the Demolding Process in Hot Embossing of Polymer Microfluidic Chip;
聚合物微流控芯片脱模过程研究
3.
The core-pulling and demolding mechanism of an injection mould for the deep cavity part were introduced.
分析了塑料桌腿塑件的结构和工艺特点,介绍了一种深腔注射模的抽芯和脱模机构,此机构运行安全可靠,自动化程度高,可为类似塑件的模具设计提供参考。
5) demould
脱模
1.
The structure characteristics and technology requirement of the washer sliding were analyzed, designed the injection mold with an ordinary injection system and three layers, solved the problem of automatic demould, the die structure and working process were introduced, practical production showed the die is safe and reliable, and it improved manufacturing efficiency.
分析了塑件的形状特点和技术要求,设计了一副普通浇注系统3层注射模,并解决了该注射模的自动脱模问题。
2.
By the analysis of the demoulding failure of the side slide of the injection mould andreferring to the principle of ejector pins moving, ejector pins were added in the side slide and thestructure of the ejector pins was improved.
通过对注塑模侧滑块脱模不良的分析,并参考动模顶出杆的顶出原理,在侧滑块上追加顶芯,再进一步改进顶芯的结构,使侧滑块顺利脱模。
6) liftout
脱模
1.
The study of parameters(helical angle and cone angle) of spiral bevel gears obtained effects on liftout processes.
近净成型技术是制造螺旋锥齿轮的发展方向,研究精锻螺旋锥齿轮参数(螺旋角和锥角)对脱模过程的影响,利用ADAMS软件的仿真功能进行模拟分析,从而判断螺旋锥齿轮脱模的可行性。
2.
Based on the simulation and analysis of software ADMAS,Cavity dies used in spiral bevel gears forging process were designed and liftout processes were simulated dynamically.
利用模拟分析软件(ADAM S)对凹模进行设计,并对脱模过程进行了动态仿真,在此基础上对锻件脱模可行性进行了研究和探索。
参考词条
补充资料：脱模装置
分子式：
CAS号：
性质：或称脱模装置。从模腔中顶出制品的装置的总称。各种合模装置均设有顶出装置。顶出装置可分为机械顶出、液压顶出和气动顶出等。机械顶出又有顶杆顶出、顶管顶出、推板顶出等。
CAS号：
性质：或称脱模装置。从模腔中顶出制品的装置的总称。各种合模装置均设有顶出装置。顶出装置可分为机械顶出、液压顶出和气动顶出等。机械顶出又有顶杆顶出、顶管顶出、推板顶出等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。