1) primary aluminium ingot
原铝锭
1.
Dissipation of primary aluminium ingot is mainly affected by melting casting and compositive finished product rate when aluminium alloy is being processed.
在铝合金压力加工过程中原铝锭的损耗率,主要受熔铸烧损及综合成品率的影响,根据生产实践,应用等比数列理论,推导了原铝锭损耗率计算公式,并列举了计算实例。
2) primary aluminium pig
原生铝锭<冶>
3) aluminum ingot
铝锭
1.
Introduction and analysis on drafit of International standard of aluminum ingot;
铝锭国际标准草案介绍与分析
2.
Realization of Fuzzy Control System Based on PLC for Aluminum Ingot Casting Machine;
铝锭铸造机模糊控制系统在PLC中的实现
3.
And also a method for the determination of micro amount of Al_2O_3 in aluminum ingot samples by spectrophotometry with aluminon as chromatogenic agent has been developed.
用金属铝与液态溴发生反应生成的AlBr3溶于甲醇、而Al2O3在无水条件下不与液态溴发生反应的不同化学行为特性,实现了Al与Al2O3的分离,采用铝试剂光度法测定铝锭中的微量Al2O3。
4) aluminium ingot
铝锭
1.
Determination of Si,Fe,Ga,Cu and Mg in Exported Aluminium Ingot by SOLIS-500 Solids Sampling System;
激光烧蚀固体进样法测定出口铝锭中硅、铁、镓、铜和镁
2.
Simultaneous Determination of 8 Impurity Elements in Aluminium Ingot by ICP-AES;
ICP-AES测定铝锭中八种杂质元素
3.
Development of new automatic stacker of aluminium ingots LDJ-20;
LDJ-20新型全自动铝锭堆垛机的研制
5) aluminum ingots
铝锭
1.
Analysis of influencing factors on aluminum ingots surface quality and its improvement measures
影响铝锭表面质量的因素分析和改善措施
2.
The bar-code technologic scheme is proposed in this paper about the management of Aluminum ingots for remelting in the production of Aluminum smelter, including product check-up, identifier, measurement, putting Aluminim ingots in the storage, arrangement of the materials in stock, taking out/loading and other problem in the technologic process.
文章针对铝冶炼企业的主要产品重熔用铝锭在成品检查、标识、计量、入库、库存实物摆放、出库装车等工艺环节所存在的问题,提出了采用条码技术的解决方案,并对软件实现作了详细论述。
3.
The production process and control system of 20kg aluminum ingots continues casting machine are described,and the production technology figure,control system diagram are derived in this paper.
文章叙述了20kg铝锭连续铸造机的生产工艺过程及控制系统组成,并给出了相应的生产工艺图、控制系统硬件框图,根据生产工艺要求以及控制功能,设计并编制了铝锭连续铸造机生产过程控制软件。
6) grain-refining aluminium ingots
细晶铝锭
1.
Investigation of Microstructure and Mechanical Properties for A356 Alloys Melted with Grain-refining Aluminium Ingots;
细晶铝锭熔炼的A356铝合金组织与性能研究
2.
The results show that the grains of the test samples added Ti by grain-refining aluminium ingots(GRAI) are fine,and precipitated phases are fine and disperse in as-cast state,and its mechanical properties is the best,especially its elongation is markedly higher than that of other test samples.
用SEM和EDS等方法研究了细晶铝锭熔铸的3003铝锰合金以及Al-10Ti中间合金、Al-5Ti-1B中间合金细化的3003铝锰合金铸态及均匀化处理状态的组织和力学性能。
3.
Through the experiment on grain refining efficiency,grain average diamaters of grain-refining aluminium ingots are less than 350 μm.
郑州大学采用纯铝的电解设备,通过向铝电解槽中添加Al2O3和TiO2混合物的方式,直接电解生产出细晶铝锭。
补充资料：原硅酸根二氧合二铝酸钙
CAS：12252-33-4
分子式：Al2O6Si·Ca
中文名称：原硅酸根二氧合二铝酸钙；硅酸钙铝；硅铝酸钙盐
英文名称：Aluminate(2-), [orthosilicato(4-)]dioxodi-, calcium ； [orthosilicato(4-)]dioxodi-aluminate(2- calcium ； [orthosilicato(4-)]dioxodi-aluminate(2- calcium； Aluminate(2-),[orthosilicato(4-)]dioxodi-,calcium
分子式：Al2O6Si·Ca
中文名称：原硅酸根二氧合二铝酸钙；硅酸钙铝；硅铝酸钙盐
英文名称：Aluminate(2-), [orthosilicato(4-)]dioxodi-, calcium ； [orthosilicato(4-)]dioxodi-aluminate(2- calcium ； [orthosilicato(4-)]dioxodi-aluminate(2- calcium； Aluminate(2-),[orthosilicato(4-)]dioxodi-,calcium
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条