1) aluminum stock
铝板锭
1.
The structure and usage of clamping device of scalper for aluminum stock are introduced in the paper.
介绍了铝板锭铣床夹紧装置的结构和用途,找出了存在的问题,提出了完善的方案。
2) aluminum ingot
铝锭
1.
Introduction and analysis on drafit of International standard of aluminum ingot;
铝锭国际标准草案介绍与分析
2.
Realization of Fuzzy Control System Based on PLC for Aluminum Ingot Casting Machine;
铝锭铸造机模糊控制系统在PLC中的实现
3.
And also a method for the determination of micro amount of Al_2O_3 in aluminum ingot samples by spectrophotometry with aluminon as chromatogenic agent has been developed.
用金属铝与液态溴发生反应生成的AlBr3溶于甲醇、而Al2O3在无水条件下不与液态溴发生反应的不同化学行为特性,实现了Al与Al2O3的分离,采用铝试剂光度法测定铝锭中的微量Al2O3。
3) aluminium ingot
铝锭
1.
Determination of Si,Fe,Ga,Cu and Mg in Exported Aluminium Ingot by SOLIS-500 Solids Sampling System;
激光烧蚀固体进样法测定出口铝锭中硅、铁、镓、铜和镁
2.
Simultaneous Determination of 8 Impurity Elements in Aluminium Ingot by ICP-AES;
ICP-AES测定铝锭中八种杂质元素
3.
Development of new automatic stacker of aluminium ingots LDJ-20;
LDJ-20新型全自动铝锭堆垛机的研制
4) aluminum ingots
铝锭
1.
Analysis of influencing factors on aluminum ingots surface quality and its improvement measures
影响铝锭表面质量的因素分析和改善措施
2.
The bar-code technologic scheme is proposed in this paper about the management of Aluminum ingots for remelting in the production of Aluminum smelter, including product check-up, identifier, measurement, putting Aluminim ingots in the storage, arrangement of the materials in stock, taking out/loading and other problem in the technologic process.
文章针对铝冶炼企业的主要产品重熔用铝锭在成品检查、标识、计量、入库、库存实物摆放、出库装车等工艺环节所存在的问题,提出了采用条码技术的解决方案,并对软件实现作了详细论述。
3.
The production process and control system of 20kg aluminum ingots continues casting machine are described,and the production technology figure,control system diagram are derived in this paper.
文章叙述了20kg铝锭连续铸造机的生产工艺过程及控制系统组成,并给出了相应的生产工艺图、控制系统硬件框图,根据生产工艺要求以及控制功能,设计并编制了铝锭连续铸造机生产过程控制软件。
5) Slab Ingot
板锭
1.
Dynamic Simulation on Temperature Field of Slab Ingot during Electroslag Remelting;
电渣重熔板锭过程中温度场的动态模拟
2.
An unsteady-state model of electroslag remehing(ESR)slab ingot is established,and the tempera- ture field of slab ingot is calculated.
建立了电渣重熔板锭过程的非稳态模型,计算了板锭重熔过程中的温度场,得到不同熔速、不同重熔时刻的熔池深度;分析了影响熔池深度的主要因素及板锭的凝固规律,计算表明:熔速是影响熔池深度的最大因素,当铸锭到达一定高度时,系统处于准稳定状态,熔池深度不再变化。
6) grain-refining aluminium ingots
细晶铝锭
1.
Investigation of Microstructure and Mechanical Properties for A356 Alloys Melted with Grain-refining Aluminium Ingots;
细晶铝锭熔炼的A356铝合金组织与性能研究
2.
The results show that the grains of the test samples added Ti by grain-refining aluminium ingots(GRAI) are fine,and precipitated phases are fine and disperse in as-cast state,and its mechanical properties is the best,especially its elongation is markedly higher than that of other test samples.
用SEM和EDS等方法研究了细晶铝锭熔铸的3003铝锰合金以及Al-10Ti中间合金、Al-5Ti-1B中间合金细化的3003铝锰合金铸态及均匀化处理状态的组织和力学性能。
3.
Through the experiment on grain refining efficiency,grain average diamaters of grain-refining aluminium ingots are less than 350 μm.
郑州大学采用纯铝的电解设备,通过向铝电解槽中添加Al2O3和TiO2混合物的方式,直接电解生产出细晶铝锭。
补充资料：渤海铝业有限公司铝板坯连铸连轧机生产卷毛料
渤海铝业有限公司铝板坯连铸连轧机生产卷毛料
渤海铝业有限公司铝板坯连铸连轧机生产卷毛制
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条