1) casting temperature
注温
1.
The influence of casting temperature and velocity on the slag deposition of ingot head;
注温和注速对钢锭头部积渣的影响
2) pouring temperature
浇注温度
1.
Effect of pouring temperatures on the microstructure of the semi-solid AlSi_9Mg alloy;
浇注温度对AlSi_9Mg半固态组织的影响
2.
Computer Aided Prediction of Effects of Pouring Temperatureon on the Solidification Structure for Twin-roll Thin Strip;
浇注温度对双辊薄带凝固组织影响的模拟预测
3.
Select the Proper Pouring Temperature of Castings Depending on Mold Filling Simulation;
依据充型模拟确定铸件浇注温度
3) low temperature pouring
低温浇注
1.
In addition, the low temperature pouring under near liquidus can also refine the grain-size.
另外发现在近液相线温度下进行低温浇注也可以起到细化晶粒的作用,且在630℃下对熔体进行电脉冲处理后浇注得到的凝固态组织最好。
2.
The semi-solid slurry of ZL101 Al alloy,which was grain-refined by RE master alloy,was prepared by low temperature pouring.
利用稀土中间合金对液态ZL101铝合金进行了细化处理,并用低温浇注技术制备了ZL101铝合金半固态浆料,研究了细化处理对所制备ZL101铝合金的半固态初生α相形貌和尺寸的影响。
4) casting temperature
浇注温度
1.
Effects of Casting Temperature on Al-5Cu Alloy in Indirect Squeezing Casting;
浇注温度对间接挤压铸造Al-5Cu合金的影响
2.
This paper researches the influence of modification process parameters(such as modification agent content, modification temperature, modification time and casting temperature etc.
研究了工业生产Sr变质亚共晶Al-7%Si合金时,变质剂含量、变质温度、变质时间、浇注温度等工艺参数对合金共晶硅细化及其性能的影响。
3.
The SiC foam/SiC_p/Al composites were fabricated by squeeze casting at different casting temperatures and the effect of casting temperature on mechanical properties of composites were investigated.
采用挤压铸造法制备出 SiC 泡沫/SiC_p 混合增强铝基复合材料,研究了不同浇注温度对复合材料力学性能的影响及影响机制。
5) injection moulding temperature
注塑温度
1.
This paper studied the effects ofβnucleator and its dosage on mechanical properties of polypropylene (PP) resin materials and examined performance and crystallinity of the materials treated at different injection moulding temperatures.
研究了β晶型成核剂及其含量对聚丙烯(PP)材料力学性能的影响,考察了不同注塑温度下材料的性能和结晶性能。
6) injection temperature
注射温度
1.
The influences of injection pressure and injection temperature, two important injection parameters, were studied.
研究了注射压力和注射温度这两个重要的注射参数对注射坯体质量的影响。
补充资料：注温
注温
teeming temperature
ZhUWen注温(teeming temperature)参见浇注工艺。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条