1) injected water temperature
注水温度
1.
It is concluded that injected water temperature ranging from 10℃-80℃ have slight effects on t.
利用CMG数值模拟软件和PIPESIM节点分析软件针对鲁2块前期注水现场试验,对相关的注水参数进行优化研究,重点通过对注入水温度、注水速度对地层原油温度场和粘度场的计算,优选了注水参数,研究表明注水温度在10～80℃之间时对油田开发效果影响不大,注入水温度采用常温水即可。
2) injection temperature profile
注水温度剖面
3) waterflooding at normal temperature
常温注水
1.
Study on feasibility of waterflooding at normal temperature in heavy oil reservoir of block Gao 18;
高18块稠油油藏常温注水开发可行性研究
4) moderate injection
温和注水
1.
Application of moderate injection mode in Sanghe Oilfield
温和注水方式在桑合油田的应用
5) pouring temperature
浇注温度
1.
Effect of pouring temperatures on the microstructure of the semi-solid AlSi_9Mg alloy;
浇注温度对AlSi_9Mg半固态组织的影响
2.
Computer Aided Prediction of Effects of Pouring Temperatureon on the Solidification Structure for Twin-roll Thin Strip;
浇注温度对双辊薄带凝固组织影响的模拟预测
3.
Select the Proper Pouring Temperature of Castings Depending on Mold Filling Simulation;
依据充型模拟确定铸件浇注温度
6) casting temperature
浇注温度
1.
Effects of Casting Temperature on Al-5Cu Alloy in Indirect Squeezing Casting;
浇注温度对间接挤压铸造Al-5Cu合金的影响
2.
This paper researches the influence of modification process parameters(such as modification agent content, modification temperature, modification time and casting temperature etc.
研究了工业生产Sr变质亚共晶Al-7%Si合金时,变质剂含量、变质温度、变质时间、浇注温度等工艺参数对合金共晶硅细化及其性能的影响。
3.
The SiC foam/SiC_p/Al composites were fabricated by squeeze casting at different casting temperatures and the effect of casting temperature on mechanical properties of composites were investigated.
采用挤压铸造法制备出 SiC 泡沫/SiC_p 混合增强铝基复合材料,研究了不同浇注温度对复合材料力学性能的影响及影响机制。
补充资料：铂电阻温度表(见电阻温度表)
铂电阻温度表(见电阻温度表)
表。bod旧nZu wendubiao铂电阻温度表见电阻温
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条