1) disc spring
碟簧
1.
Research and Development of Integrated Intelligent Design System for Disc Spring;
碟簧集成智能化设计系统的研究与开发
2.
This paper discusses the design and analysis of disc spring with large deformation.
以有限元软件ANSYS为分析工具,作出了大变形碟簧的刚度曲线。
3.
The traditional design for disc spring in micro-displacement giant magnetostrictive actuator is entirely based on its size, the magnitude of pre-stress as design target, regardless of specific magnetostriction characteristic, making full use of disc spring deformation principle under press.
在传统的超磁致伸缩微位移致动器碟簧设计中,以预压力大小作为唯一设计指标。
2) disk spring
碟簧
1.
Development of CAD/CAM integrated system of the disk spring based on AutoCAD R12;
基于AutoCADR12平台下的碟簧CAD/CAM集成系统的开发
2.
The dynamic characteristics of disk spring taking account of effect of static load,nonlinear restoring force and combined Coulomb and viscous damping are presented.
详细研究了考虑静力载荷影响、具有弹性非线性和 Coulomb摩擦阻尼非线性的碟簧元件的动力学特性。
3.
Failure analysis for a cracked disk spring was carried out through chemical composition analysis,hardness test,metallograph observation,fracture analysis and EDAX.
通过对断裂碟簧的化学成分、硬度、金相、扫描电镜和能谱分析,指出了非金属夹杂物,特别是硫化物含量偏高,以及严重的带状组织,阻断了组织的连续性,是产生裂纹的主要原因。
3) plate spring
碟簧
1.
It is proved by experiment that the system output can be visibly improved by reducing spring stiffness and therefore, according to precompression and relative conditions, the plate spring data should be designed to make the curve \%f-x\% as poss.
本文对磁致伸缩换能系统弹簧的特点、作用进行了系统地分析与讨论 ,指出了阶跃段磁致伸缩力 Fm 与位移 X存在线性关系 ,并通过试验证明了减小弹簧刚度可明显改善系统输出 ,针对不同预压力及相关条件设计碟簧参数 ,使 f - x曲线尽量平直。
4) belleville spring
碟形弹簧
1.
Over the structure and process analysis to car-used ABS shell, using belleville spring to do four sides core-drawing to the products within the cylinder surface, the mold structure is simple and close, stable and reliable proved by production, the effect is remarkable, and it can be referenced by similar injection mold products.
通过对汽车ABS壳体的结构和工艺性分析,采用碟形弹簧,对产品进行圆周内四面抽芯,使模具结构简单紧凑,经生产验证,模具结构稳定可靠,效果显著,对类似产品的注射模有较好的参考价值。
5) disc spring
碟形弹簧
1.
Research and manufacture of pneumatic control disc spring safety valve;
气控碟形弹簧式安全阀的研制
2.
The deign and machining of the key components of this shock absorber is introduced,including the surface treatment of the spline mandrel,the design of disc spring and connecting housing,and the configuration of sealing and bearing.
介绍了该空气机械减震器关键零部件的设计,包括花键心轴的表面处理技术、联接筒体设计、减震源碟形弹簧组合设计、密封及支承设计。
3.
Based on the analysis of the pressing technology of disc springs, the CAD system method for the dies and moulds with disc springs was developed on the AutoCAD R14 platform by using Visual C+ +6.
在分析碟形弹簧冲压工艺的基础上 ,利用VisualC+ + 6。
6) disk spring
碟形弹簧
1.
A analysis of vertical seismic response on vertical seismic isolation system by disk spring;
碟形弹簧竖向减震装置的竖向地震反应分析
2.
A study on vertical seismic isolation system by disk spring;
碟形弹簧竖向减震装置的研究
3.
A study on vertical seismic isolation system with disk spring;
碟形弹簧竖向减震体系的分析与研究
补充资料：八味围碟
八味围碟
原料：鲜鱿鱼、河虾、桂鱼、金华火腿、鸡脯、香菇、蛋松、黄瓜、核桃
调料：盐、味精、黄酒、麻油、醋精、生油、糖
操作方法：
（1） 将以各种原料加工后，用不同的烹调方法烹制成不同的冷菜。
（2） 将烹制成的冷菜装入围碟内即成。
特点：鲜、嫩、脆、清淡爽口。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。