说明：双击或选中下面任意单词，将显示该词的音标、读音、翻译等；选中中文或多个词，将显示翻译。
您的位置：首页 -> 词典 -> 碟形弹簧支座
1)  Dish-Spring Bearing
碟形弹簧支座
1.
The 3DB was composed of Lead Rubber Beading (LRB) and Dish-Spring Bearing with damper (DBS) in series.
提出了一种铅芯橡胶碟簧三维隔震支座 (3DB) ,它由铅芯叠层橡胶支座LRB和加有阻尼材料的碟形弹簧支座DSB串联组成 ,3DB能有效解决三维隔震支座竖向阻尼的难题 ,并可以有效地抑制摇摆 。
2.
In this paper is introduced the three-dimension lead-rubber dish-spring bearing (3DB), composed of lead rubber bearing (LRB) and dish-spring bearing with damper (DSB) in series, which is found effective at vertical damping of 3D isolation bearing and suppressing oscillation.
它由铅芯叠层橡胶支座LRB和加有阻尼材料的碟形弹簧支座DSB串联组成 ,能有效地解决三维隔震支座竖向阻尼的难题 ,并可以有效地抑制摇摆。
2)  belleville spring
碟形弹簧
1.
Over the structure and process analysis to car-used ABS shell, using belleville spring to do four sides core-drawing to the products within the cylinder surface, the mold structure is simple and close, stable and reliable proved by production, the effect is remarkable, and it can be referenced by similar injection mold products.
通过对汽车ABS壳体的结构和工艺性分析,采用碟形弹簧,对产品进行圆周内四面抽芯,使模具结构简单紧凑,经生产验证,模具结构稳定可靠,效果显著,对类似产品的注射模有较好的参考价值。
更多例句>>
3)  disc spring
碟形弹簧
1.
Research and manufacture of pneumatic control disc spring safety valve;
气控碟形弹簧式安全阀的研制
2.
The deign and machining of the key components of this shock absorber is introduced,including the surface treatment of the spline mandrel,the design of disc spring and connecting housing,and the configuration of sealing and bearing.
介绍了该空气机械减震器关键零部件的设计,包括花键心轴的表面处理技术、联接筒体设计、减震源碟形弹簧组合设计、密封及支承设计。
3.
Based on the analysis of the pressing technology of disc springs, the CAD system method for the dies and moulds with disc springs was developed on the AutoCAD R14 platform by using Visual C+ +6.
在分析碟形弹簧冲压工艺的基础上 ,利用VisualC+ + 6。
更多例句>>
4)  disk spring
碟形弹簧
1.
A analysis of vertical seismic response on vertical seismic isolation system by disk spring;
碟形弹簧竖向减震装置的竖向地震反应分析
2.
A study on vertical seismic isolation system by disk spring;
碟形弹簧竖向减震装置的研究
3.
A study on vertical seismic isolation system with disk spring;
碟形弹簧竖向减震体系的分析与研究
更多例句>>
5)  dish spring
碟形弹簧
1.
Optimization of the Dish Spring in Clutch;
离合器碟形弹簧的优化设计
更多例句>>
6)  spring support
弹簧支座
1.
Isolation control analysis is carried out for Kewitte latticed shell in which all horizontal pin supports were replaced by spring supports or damped spring supports.
将凯威特网壳结构的固定支座设置成隔震支座,分别采用弹簧支座和粘弹阻尼支座对结构进行了隔震控制。
2.
Isolation control analysis was carried out for geodesic latticed shell in which all horizontal pin supports were changed as spring supports or damped spring supports.
将短程线型网壳结构的支座设置成隔震支座,对结构进行了隔震控制,分别采用弹簧支座和弹簧阻尼支座对结构进行了控制。
3.
In this paper,the BSS is simplified as a curve beam with elastic supports,where the actions of strut and string are simulated as spring supports.
将张弦梁结构的上弦模拟为为曲梁,撑杆和下弦索的作用模拟为弹簧支座,探讨了其刚度变化对上弦曲梁受力性能的影响,分析了张弦梁结构的简化计算方法。
补充资料：V形柱式支座
分子式：
CAS号：

性质：每两根支柱组成一组呈V字形结构，每组支柱与球形容器的赤道圈等距离相连，柱间无拉杆连接的一种球形容器柱式支座。其承受膨胀变形较好。并且由于支柱与壳体相切，相对赤道平面的垂线向内倾斜2°～3°，因而在连接处可产生一向心水平力，增加了基础的稳定性。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条