1) rheorolling
流变轧制
1.
Microstructural characteristics of electromagnetically stirred semi-solid 60Si2Mn steel after rheorolling;
电磁搅拌的半固态60Si2 Mn钢流变轧制的组织特征
2.
High carbon tool steels processed by conventional processing methods and semi-solid rheorolling technology are discussed.
探讨了高碳工具钢常规的加工方法和半固态流变轧制技术,结果表明将在凝固过程中进行搅拌后制备的高碳工具钢半固态浆料直接进行流变轧制,可生产出成分均匀、没有偏析的产品,消除了在常规轧制中很难克服的网状碳化物等缺陷;半固态固相颗粒细小而且星球状可生产出高强、高韧性的工具钢。
2) rehoroll-casting
流变铸轧
1.
Research on Technology of Rehoroll-Casting Forming for Semi-solid AZ91D Magnesium Alloy;
半固态AZ91D镁合金流变铸轧成形技术研究
2.
In the study on the process test of rehoroll-casting for preparing semi-solid magnesium alloy strip,the stirring speed,the stirring time,metal liquid contact time,pouring temperature are taken as test factors.
在半固态AZ91D镁合金铸轧工艺试验研究中,选取机械搅拌速度、机械搅拌时间、熔体静置时间和浇铸温度作为试验因子,用正交试验法进行半固态AZ91D镁合金流变铸轧试验;用极差分析法分析了试验结果。
3) rolling deformation
轧制变形
1.
The influence of rolling deformation and heat treatment temperature on structures, mechanical properties is studied.
X射线衍射结果表明,随着轧制变形量的增加,Ti50Ni47Fe3合金在轧制方向上出现了择优取向;Ti50Ni47Fe3合金的晶粒尺寸随着轧制变形量的增加而减小,随着热处理温度的升高而增大;Ti50Ni47Fe3合金的抗拉强度和屈服强度随着轧制变形量的增加而增大,随热处理温度的升高而降低。
2.
The results show that the orientation distribution calculated by the FC (full constraints)Taylor model is closer to experimental results than those by other models at the low rolling deformation de.
结果表明:在低轧制变形程度时,完全限制(FC)模型计算结果的取向分布较其它模型更符合实际结果。
3.
The results show that the rolling textures for the sample with initial randomly distributed texture mainly consists of C,S and B components during rolling deformation while the orientation density values for the three textures only have slight difference, most crystallites a.
结果表明:随着轧制变形的进行,对于初始自由分布的样品,晶粒取向主要向α,β取向线附近聚集,其形变织构主要由C,S及B织构组成,且3种织构成分密度值相差不大;对于初始具有近似立方织构的样品,晶粒取向主要向β取向线上聚集,其形变织构主要由C,S织构组成,B织构成分相对较弱。
4) Thixorolling
触变轧制
5) thermomechanical rolling
形变轧制
6) split-flow rolling
分流轧制
1.
Discussion on and practice of split-flow rolling technology for hot-rolled ribbed bar;
热轧带肋钢筋分流轧制技术研究与实践
补充资料：板带轧制速度规程(见板带轧制规程设计)
板带轧制速度规程(见板带轧制规程设计)
speed schedule for plate and strip rolling
bandai zhazhi sudu guieheng板带轧制速度规程(speed seheduxe fo:plateand strip rolling)见板带札制规程设计。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条