1) flux composition
焊剂配方
2) welding flux
焊剂
1.
Proposals are also put forward for replacing the classification of welding flux according to the degree of basicity by other evaluation scales.
研究了描述埋弧焊焊剂的冶金性能指标———氧活度和氧含量的测定,通过对焊剂渣系化学成分的分析,指出用Boniszewski公式计算出的碱度不能准确地描述氧活度和氧含量这两个指标。
3) flux
焊剂
1.
Preparatory Discuss about the Action Mechanism of fluxes in TIG Welding for ZA Alloy;
焊剂在ZA合金TIG焊接过程中作用机理初探
2.
Welding testing experiment showed that when welding T91 and TP304, the welding flux can be used to take the place of argon backing gas with getting qualified welding joint in microstructure, chemical composition, mechanical properties and back protection.
简要介绍了一种防止T91／TP304钢管焊缝背面氧化的新技术,焊接工艺评定结果表明,使用背面防氧化焊剂代替氩气进行背面保护焊接T91和TP304钢管,可以得到金相、化学成分、机械性能及背面保护合格的焊接接头。
3.
It analyzes main problem exiting in flux recovery fitting for production of SSAW pipe and new type of flux reclaimed fitting is designed which possesses outstand sealability and can be operated continuously.
针对埋弧焊钢管生产中焊剂回收装置存在的问题进行分析与研究,设计了一种密封好、连续工作性强的焊剂回收装置。
4) agglomerated flux
烧结焊剂
1.
Experimental study on agglomerated flux with CaCO_3-CaF_2-SiO_2 slag system;
对CaCO_3-CaF_2-SiO_2渣系烧结焊剂的试验研究
2.
Application of MnO for submerged arc agglomerated flux;
埋弧焊烧结焊剂中MnO应用的试验分析
3.
Experimental research of agglomerated flux with ejected course of MgO-CaF_2-Al_2O_3-MnO;
对MgO-CaF_2-Al_2O_3-MnO渣系烧结焊剂的试验研究
5) soldering flux
助焊剂
1.
Subsistent patent documents and studies of soldering fluxes in different countries and regions were compared.
概述了世界电子产品的无铅化趋势及相关立法,比较了世界各国及地区的助焊剂专利文献,分析了助焊剂的研究进展状况,着重论述了微电子组装中无铅钎料专用助焊剂的特点和要求,并提出了开发和研究无铅钎料专用环保型助焊剂需要解决的一些关键问题。
2.
The no-clean soldering fluxes used presently contained a high concentration of organic solvents which would generally turn into volatile organic compounds (VOC).
针对现有的免清洗助焊剂中对环境和人类健康有害的挥发性有机化合物VOC,研制出一种以水作溶剂不含VOC的水基免清洗助焊剂,使用Sn-3。
3.
The RC-18A type soldering flux is a new type of soldering chemical industry product which is prepared for the needs of the electronics, instrument and electrical equipment industries etc.
RC—18A型助焊剂是为满足电子、仪表、电器等行业生产的需要而研制的一种新型助焊化工产品,系氯化物混合型水溶液,具有表面再处理及充当优良钎剂的双重作用,主要适用于电子、仪表、电器等行业零件的软钎焊。
6) flux strip
焊剂带
1.
Realization of ultra-narrow gap welding with flux strips constraining arc;
焊剂带约束电弧超窄间隙焊接的实现
2.
Present study provides a new kind of metal arc welding technology,which feeds two pieces of flux strips into arc along both sides of wire,and adds flux to welding pool and constricts arc with flux strips.
研究了一种熔化极电弧焊接方法,该方法是将两条焊剂带沿焊丝两侧连续送入电弧区,利用焊剂带向熔池中加入焊剂并约束电弧。
参考词条
补充资料：焊接:焊剂
颗粒状焊接材料。在焊接时它能够熔化形成熔渣和气体﹐对熔池起保护和冶金作用。焊剂由大理石﹑石英﹑萤石等矿石和鈦白粉﹑纤维素等化学物质组成。焊剂主要用於埋弧焊和电渣焊。用以焊接各种钢材和有色金属时﹐必须与相应的焊丝合理配合使用﹐才能得到满意的焊缝。焊剂分为酸性﹑中性和硷性3种﹐按製造方法分为熔炼焊剂和非熔炼焊剂。熔炼焊剂是用各种矿石经电弧炉熔炼后粉碎而成。其中﹐酸性熔炼焊剂应用较多﹐它配以适当的焊丝﹐广泛用於碳钢和低合金结构钢的焊接。中性和硷性熔炼焊剂则用於强度较高的高强钢焊接。非熔炼焊剂製造简单﹐劳动卫生条件较好﹐质量容易控制﹐并可加入各种所需合金元素来改善焊缝金属组织和性能﹐因而得到较广泛的应用。非熔炼焊剂烘乾温度在 400℃以下的﹐称为黏结焊剂﹔烘乾温度在400～1000℃的﹐称为烧结焊剂﹐后者强度好﹐成品率高﹐应用较多。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。