1) amorphous NiNi_(74)Si_(10)B_(16) alloy
Ni74Si10B16非晶合金
2) amorphous alloy
非晶合金
1.
Current study and advances on superplastic forming of bulk amorphous alloy;
大块非晶合金超塑性变形的研究现状与发展
2.
Influence of Oxidation on the Accuracy of DSC and TG Measurements for Amorphous Alloys;
试验条件对非晶合金DSC与TG测量的影响
3.
Study of behavior of non-isothermal crystallization of amorphous alloy Mg_(65)Cu_(22)Ni_3Y_(10);
Mg_(65)Cu_(22)Ni_3Y_(10)非晶合金的非等温晶化行为研究
3) amorphous alloys
非晶合金
1.
Correlation between crystallization kinetics of amorphous alloys and primary phases during crystallization;
非晶合金的晶化动力学与初生相的内在联系
2.
Crystallization kinetics of Ni_(59)Zr_(16)Ti_(13)Si_3Sn_2Nb_7 amorphous alloys;
Ni_(59)Zr_(16)Ti_(13)Si_3Sn_2Nb_7非晶合金的晶化动力学
3.
5 amorphous alloys were prepared by a single roller melt-spinning technique in an air atmosphere.
5非晶合金的非等温晶化的动力学行为。
4) metallic glass
非晶合金
1.
Plastic deformation of bulk metallic glass (BMG) Zr55Al10Ni5Cu30 was investigated by nanoindentation experiments at room temperature.
对Zr55Al10Ni5Cu30块状非晶合金进行了室温纳米压痕实验,利用扫描电子显微镜、透射电子显微镜揭示了非晶合金的微区形变特征。
2.
The deformation and fracture behavior under quasi-static compressive loading of a bulk metallic glass,Zr-Ti-Ni-Cu,was studied using instron universal-testing machine(IUTM) and scanning electron microscopy(SEM) at room temperature.
利用IUTM和SEM研究了Zr-Ti-Ni-Cu块状非晶合金的准静态单轴压缩变形和断裂行为。
3.
5 metallic glass has been studied by DSC and XRD.
5块状非晶合金的相变动力学。
5) amorphous
[英][ə'mɔ:fəs] [美][ə'mɔrfəs]
非晶合金
1.
Cu40Ti60-xZrx(x=0,10,30,50) amorphous alloys were fabricated successfully by using mechanical alloying method.
采用机械合金化法成功制备Cu40Ti60-xZrx(x=0,10,30,50)非晶合金。
2.
The GMI effects have been observed in two Co-Rich amorphous ribbons and a Fe-Rich alloy ribbon.
我们研究了三种非晶合金薄带的巨磁阻抗效应。
3.
The application of the homemade 1K101 amorphous core in induction module is reported in this paper.
介绍了国产非晶合金应用于感应加速组元的可行性研究的初步结果。
6) amorphous alloy
非晶态合金
1.
Preparation and application in welding of bulk Mg_(65)Cu_(22)Ni_3Y_(10) amorphous alloys;
块体Mg_(65)Cu_(22)Ni_3Y_(10)非晶态合金的制备及在焊接中的应用
2.
Formation and crystallized behavior of Mg_(65)Cu_(25)Y_(10) amorphous alloy;
Mg_(65)Cu_(25)Y_(10)非晶态合金的形成及其晶化行为
3.
Study for hydrogenation of furfuryl alcohol to tetrafurfural alcohol on NiB/SiO_2 amorphous alloy catalyst;
NiB/SiO_2非晶态合金催化剂用于糠醇加氢制四氢糠醇的研究
补充资料：C10～C16 secondary alcohol
分子式：
CAS号：
性质：(R+R′=C9～C15烷基) 折射率nD201.4431，密度0.8312g/cm3，表面张力18.0mN/ml(Du Noüy法)，色泽(λmax=498mm；酒精透光率100％)，闪点(闭口杯法)128℃，黏度(0.8mm毛细管黏度计)12.2728mPa·s，凝固点4.83℃。具有良好的渗透性，润湿性。制法同Cll～C13仲醇。是制非离子表面活性剂的原料。
CAS号：
性质：(R+R′=C9～C15烷基) 折射率nD201.4431，密度0.8312g/cm3，表面张力18.0mN/ml(Du Noüy法)，色泽(λmax=498mm；酒精透光率100％)，闪点(闭口杯法)128℃，黏度(0.8mm毛细管黏度计)12.2728mPa·s，凝固点4.83℃。具有良好的渗透性，润湿性。制法同Cll～C13仲醇。是制非离子表面活性剂的原料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条