1) MoSi2 SiC
MoSi2-SiC
1.
The electrical resistivity of the composite MoSi2 SiC containing various SiC contents was calculated by a topological method.
用拓扑法计算了不同显微组织的MoSi2-SiC材料的电阻率,得到的理论推算结果与实验值吻合很好。
2) MoSi_2/SiC coating
MoSi2/SiC涂层
3) MoSi2-SiC composite
MoSi2-SiC复合材料
1.
Using Mo, Si, and C element powders as starting materials, a spark plasma sintering (SPS) was employed to synthesize high-density MoSi2 and MoSi2-SiC composite.
以Mo、Si和C粉末为对象,利用SPS技术合成致密的MoSi2和MoSi2-SiC复合材料。
4) SiC/MoSi2 composites
SiC/MoSi2复合材料
1.
The wear surface,wear debris micrographs and composition of SiC/MoSi2 composites against CrWMn steel were observed and measured by means of SEM and EDS.
采用扫描电镜和能谱仪观察并测定了SiC/MoSi2复合材料与CrWMn钢对磨试样的磨损表面、磨屑形貌及磨屑成分,研究了SiC/MoSi2复合材料与CrWMn钢摩擦副的干摩擦磨损性能和磨损机理。
2.
The Gibbs free energy change rule of binary compound in Mo-Si-C system vs temperature was studied from the view of thermodynamics,and the optimum technological parameters of in-situ reaction hot-pressing sintering of SiC/MoSi2 composites were proposed.
从热力学角度研究了Mo-Si-C三元系中所有二元化合物化合反应的吉布斯自由能随温度变化的规律,探索了SiC/MoSi2复合材料原位反应热压烧结的最佳工艺参数。
5) MoSi 2/SiC composites
MoSi2/SiC复合材料
6) SiC-MoSi2 composite antioxidation coating
SiC-MoSi2抗氧化复合涂层
补充资料：bioactive glass-ceramic composite reinforced by SiC whisker
分子式：
CAS号：
性质：由碳化硅晶须与生物活性玻璃陶瓷复合而成的生物陶瓷复合材料。高强度、高弹性模量、无毒的碳化硅晶须在陶瓷基材中弥散分布，使材料中的裂纹相对均匀，裂纹扩展发生转向和分支；外力作用下碳化硅晶须拔出时产生的拔出效应，使复合陶瓷的弯曲强度达460MPa，断裂韧性达4.3MPa·m1/2，维伯尔系数高达24.7，标志着它是可承力的生物陶瓷复合材料。
CAS号：
性质：由碳化硅晶须与生物活性玻璃陶瓷复合而成的生物陶瓷复合材料。高强度、高弹性模量、无毒的碳化硅晶须在陶瓷基材中弥散分布，使材料中的裂纹相对均匀，裂纹扩展发生转向和分支；外力作用下碳化硅晶须拔出时产生的拔出效应，使复合陶瓷的弯曲强度达460MPa，断裂韧性达4.3MPa·m1/2，维伯尔系数高达24.7，标志着它是可承力的生物陶瓷复合材料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条