1) Inverse suspension polymerization
反向悬浮聚合
1.
Acrylic acid and its sodium salt and acrylamide copolymer (PAA-PAA Na-PAM) were prepared by inverse suspension polymerization .
采用反向悬浮聚合法制备了丙烯酸 (钠 )与丙烯酰胺共聚物 ,通过分散剂的选择 ,得出了以羧甲基纤维素、Span- 80、羊毛脂为分散剂的较稳定的聚合体系 ,其产物呈颗粒状 ;探讨了聚合反应条件的影响 ,并测试了共聚物的部分性能。
2) Inverse suspension polymerization
反相悬浮聚合
1.
Study and application of inverse suspension polymerization technique;
反相悬浮聚合技术的研究进展与应用
2.
Synthesis of super high molecular weight sodium polyacrylate by inverse suspension polymerization;
反相悬浮聚合法合成超高分子量聚丙烯酸钠
3.
Effect of dispersion agent on the properties of water absorption Resin in inverse suspension polymerization;
分散剂对反相悬浮聚合吸水树脂性状的影响
3) inverse suspension polymerization
反相悬浮聚合法
1.
A kind of salt-resisting multi-copolymerized superabsorbent polymer was synthesized by inverse suspension polymerization of acrylic acid(AA) , acrylamide( AM), soldium 2-acrrlamido-2-methyl-propanesulfonate(NaAMPS) and DADMAC using N, N-methylene-bis-acrylamide as crosslinking agent, and sodium sulfite as initiator, and cyclohexane as continuous phase.
采用反相悬浮聚合法,以过硫酸钾为引发剂,N,N-亚甲基双丙烯酰胺为交联剂,合成了丙烯酸钠/丙烯酰胺/2-丙烯酰胺基-2-甲基丙磺酸钠/二烯丙基二甲基氯化铵四元共聚高吸水性树脂。
2.
The starch-acrylic acid(AA)-acrylamide(AM) super absorbent resin was prepared from sweet potato starch as a raw material, acrylic acid and acrylamide as monomer, ammonium persulfate-sodium bisulfate as initiator, n,n-methylene-bisacrylamide as cross-linking agent by inverse suspension polymerization, and the best synthesize craft conditions were studied.
以红薯淀粉为原料，丙烯酸(AA)和丙烯酰胺(AM)为单体，过硫酸铵和亚硫酸氢钠为引发剂，N，N—亚甲基双丙烯酰胺为交联剂，采用反相悬浮聚合法合成了淀粉-丙烯酸-丙烯酰胺高吸水性树脂，并研究了最佳合成工艺条件。
3.
Poly(sodiumacrylate)/montmorillonite composite was synthesized by inverse suspension polymerization using partially neutralized acrylic acid and montmorillonite.
以丙烯酸和蒙脱土为原料,利用反相悬浮聚合法进行了聚丙烯酸钠/蒙脱土复合高吸水性树脂的合成研究。
4) reversed phase suspension polymerization
反相悬浮聚合
1.
A spherical lignin-based ion exchange resin was prepared with calciumlignosulfonate as raw material in a cheap and non-toxic disperse phase by reversed phase suspension polymerization technique.
以木素磺酸钙为原料,利用反相悬浮聚合技术制备出球状木素基离子交换树脂。
2.
The spherical ligninbased cation exchange resin was prepared with calcium lignosulphonate as raw material in a cheap and non-toxic dispersing medium by reversed phase suspension polymerization.
以木素磺酸钙为原料,在一种价廉无毒的分散介质中通过反相悬浮聚合制备了球形木素基正离子交换树脂。
3.
High water absorbent poly(sodium acrylate) was prepared by reversed phase suspension polymerization.
采用反相悬浮聚合法制备聚丙烯酸钠高吸水树脂 ,研究了中和度、引发剂用量、交联剂用量、悬浮剂用量对高吸水树脂的吸水性能的影响。
5) suspension polymerization reactor
悬浮聚合反应器
1.
The technology of scale up and computer control of batch suspension polymerization reactors were reviewed with 27 references.
讨论了悬浮聚合反应器的放大问题及计算机控制技术,介绍了具有预分散器的悬浮聚合反应器和连续悬浮聚合反应器。
6) Reverse Suspension Polymerization Method
反相悬浮聚合法
1.
P (AM-co-MAA)/ZnO composite microspheres were prepared by inter-phases reaction of Zn (Ac)2 and hydrazine hydrate in NaOH solution using P (AM-co-MAA) microgels prepared by reverse suspension polymerization method as template.
采用反相悬浮聚合法合成的P(AM-co-MAA)水凝胶为模板,用Zn(Ac)2溶胀后,加入水合肼和NaOH溶液,通过两相界面反应,使ZnO沉积于微球表面,制得P(AM-co-MAA)/ZnO有机-无机复合微球。
补充资料：反相悬浮聚合
分子式：
CAS号：
性质： 分散相是水相，连续相是油相，水溶性单体液滴悬浮在油相中进行的聚合。聚合发生在液滴中，类似于溶液聚合。如丙烯酰胺的反相悬浮聚合，以甲苯为油相，偶氮二异丁腈为引发剂，丙烯酰胺水溶液组成单体液滴分散在甲苯中，分散剂为滑石粉或磷酸钙等。
CAS号：
性质： 分散相是水相，连续相是油相，水溶性单体液滴悬浮在油相中进行的聚合。聚合发生在液滴中，类似于溶液聚合。如丙烯酰胺的反相悬浮聚合，以甲苯为油相，偶氮二异丁腈为引发剂，丙烯酰胺水溶液组成单体液滴分散在甲苯中，分散剂为滑石粉或磷酸钙等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条