1) microsuspension polymerization
微悬浮聚合
1.
Kinetic study on microsuspension polymerization of vinyl acetate;
微悬浮聚合法合成聚醋酸乙烯酯的动力学研究
2) Suspension polymerization
悬浮聚合
1.
Production reasons of "fish eyes" of resin by suspension polymerization process and preventive measures;
悬浮聚合PVC树脂中“鱼眼”的产生及预防
2.
The pilot research on the combined initiator system for the suspension polymerization of vinyl chloride;
氯乙烯悬浮聚合复合引发剂体系的中试研究
3.
Stirring characters and design philosophies of three-bladed helical agitator in suspension polymerization;
三叶式后掠桨用于悬浮聚合时的搅拌特性和设计原则
3) aqueous micro-suspension polymerization
水溶液微悬浮聚合
1.
Molecularly imprinted polymer microspheres against 4-aminopyridine (4-AP) and trimethoprim (TMP) were synthesized by aqueous micro-suspension polymerization with polyvinyl alcohol 400 as dispersive reagent.
采用聚乙烯醇 40 0作为分散剂 ,利用模板分子与功能单体 /聚合物残基之间的离子键 (静电 )相互作用形成复合物 ,用水溶液微悬浮聚合法制备了 4 氨基吡啶 (4 AP)和甲氧苄氨嘧啶 (TMP)分子印迹聚合物微球 。
4) suspension polymerization
悬浮聚合法
1.
The high oil adsorption resin was synthesized by method of suspension polymerization.
采用悬浮聚合法合成了丙烯酸系二元共聚高吸油性树脂,系统研究了悬浮聚合丙烯酸系二元共聚吸油性树脂中不同单体配比,交联剂用量,反应温度等因素的影响,对吸油性树脂的吸油倍率、保油率以及耐热耐寒性能进行了研究。
2.
Synthsis of high_absorbing resin has been studied in this article,using suspension polymerization method with water as dispersed phase,DVB as crosslinking agent and BPO as initiator.
采用悬浮聚合法 ,以水为分散相 ,DVB为交联剂 ,BPO为引发剂 ,以价格低廉的苯乙烯、甲基丙烯酸甲酯、丙烯酸甲酯及α-烯烃为共聚单体 ,合成了低交联度的聚甲基丙烯酸甲酯及聚苯乙烯等三个系列的高吸油性树脂 。
3.
Study on the synthesis of SAN resin using N-phenylmaleimide,styrene and acry-lonitrile copolymer through suspension polymerization,the best technological conditions was obtained and it effect on ABS resin property was investiged.
通过悬浮聚合法将N-苯基马来酰亚胺单体与苯乙烯、丙烯腈共聚合成SAN树脂,得到最佳工艺条件,并考察其对ABS树脂性能的影响。
5) suspension copolymerization
悬浮共聚合
1.
Study on the thermal characteristics of toner prepared by the suspension copolymerization method;
悬浮共聚合法制备墨粉的热学特性研究
2.
Study on particle size characteristics of toner prepared by the suspension copolymerization method;
悬浮共聚合法制墨粉的粒度特性研究
6) SPG suspension polymerization
SPG悬浮聚合
补充资料：微悬浮法聚氯乙烯
分子式：
CAS号：
性质：指用微悬浮法所制得的一种聚氯乙烯树脂。树脂颗粒分布比传统乳液法聚氯乙烯宽，而且平均粒径较大，可用以配制低黏度糊。此法工艺特点是氯乙烯单体借助于乳化剂和高剪切机械力(常用胶体磨，高速泵，均化泵)的作用在水中分散成如1μm左右液滴，采用油溶性引发剂引发聚合。它兼具乳液法和悬浮法的特点，胶乳粒径大小可调，生产稳定。用于配制聚氯乙烯糊，进行各种糊加工成型。
CAS号：
性质：指用微悬浮法所制得的一种聚氯乙烯树脂。树脂颗粒分布比传统乳液法聚氯乙烯宽，而且平均粒径较大，可用以配制低黏度糊。此法工艺特点是氯乙烯单体借助于乳化剂和高剪切机械力(常用胶体磨，高速泵，均化泵)的作用在水中分散成如1μm左右液滴，采用油溶性引发剂引发聚合。它兼具乳液法和悬浮法的特点，胶乳粒径大小可调，生产稳定。用于配制聚氯乙烯糊，进行各种糊加工成型。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条