1) In-situ Suspension Polymerization
原位悬浮聚合
1.
Properties of PVC/nano-CaCO_3 composite resin prepared by in-situ suspension polymerization;
原位悬浮聚合PVC／纳米CaCO_3的制备及其性能
2.
Controlling the conversion of in-situ suspension polymerization of VCM/nano-CaCO_3;
氯乙烯/纳米碳酸钙原位悬浮聚合转化率的控制
3.
Based on the synthesis of ACS resin, ACS/Sb_2O_3 composite resin is prepared by in-situ suspension polymerization and melting blend method.
本文在ACS树脂合成研究的基础上,通过超细无机阻燃剂Sb_2O_3存在下的原位悬浮聚合技术和熔融复合技术,制备ACS/Sb_2O_3复合树脂,研究Sb_2O_3的表面改性工艺,探讨Sb_2O_3的存在对ACS树脂颗粒特性的影响,并对ACS/Sb_2O_3复合树脂的力学、阻燃等性能进行研究,同时对不同方法制备的复合树脂的性能进行比较。
2) in situ suspension polymerization
原位悬浮聚合
1.
The nano-sized silica particles were modified with 3-(trimethoxysilyl) propyl methacrylate (MPS) and well dispersed in methyl methacrylate (MMA),from which poly(methyl methacrylate)/ nano-silica composite particles were prepared via in situ suspension polymerization.
采用甲基丙烯酸-3-甲氧基硅丙酯(MPS)对分散于甲基丙烯酸甲酯(MMA)中的纳米SiO_2粒子进行偶联改性,得到了表面改性的纳米SiO_2单体分散液,用原位悬浮聚合方法制备了不同SiO_2含量的PMMA/纳米SiO_2复合粒子。
2.
Polystyrene/nano-CeO_~2 composites are produced by in situ suspension polymerization.
通过原位悬浮聚合法制备聚苯乙烯(PS)/纳米二氧化铈(CeO2)复合材料。
3) situ suspension copolymerization
原位悬浮共聚合
4) Suspension polymerization
悬浮聚合
1.
Production reasons of "fish eyes" of resin by suspension polymerization process and preventive measures;
悬浮聚合PVC树脂中“鱼眼”的产生及预防
2.
The pilot research on the combined initiator system for the suspension polymerization of vinyl chloride;
氯乙烯悬浮聚合复合引发剂体系的中试研究
3.
Stirring characters and design philosophies of three-bladed helical agitator in suspension polymerization;
三叶式后掠桨用于悬浮聚合时的搅拌特性和设计原则
5) suspension polymerization
悬浮聚合法
1.
The high oil adsorption resin was synthesized by method of suspension polymerization.
采用悬浮聚合法合成了丙烯酸系二元共聚高吸油性树脂,系统研究了悬浮聚合丙烯酸系二元共聚吸油性树脂中不同单体配比,交联剂用量,反应温度等因素的影响,对吸油性树脂的吸油倍率、保油率以及耐热耐寒性能进行了研究。
2.
Synthsis of high_absorbing resin has been studied in this article,using suspension polymerization method with water as dispersed phase,DVB as crosslinking agent and BPO as initiator.
采用悬浮聚合法 ,以水为分散相 ,DVB为交联剂 ,BPO为引发剂 ,以价格低廉的苯乙烯、甲基丙烯酸甲酯、丙烯酸甲酯及α-烯烃为共聚单体 ,合成了低交联度的聚甲基丙烯酸甲酯及聚苯乙烯等三个系列的高吸油性树脂 。
3.
Study on the synthesis of SAN resin using N-phenylmaleimide,styrene and acry-lonitrile copolymer through suspension polymerization,the best technological conditions was obtained and it effect on ABS resin property was investiged.
通过悬浮聚合法将N-苯基马来酰亚胺单体与苯乙烯、丙烯腈共聚合成SAN树脂,得到最佳工艺条件,并考察其对ABS树脂性能的影响。
6) microsuspension polymerization
微悬浮聚合
1.
Kinetic study on microsuspension polymerization of vinyl acetate;
微悬浮聚合法合成聚醋酸乙烯酯的动力学研究
补充资料：反相悬浮聚合
分子式：
CAS号：
性质： 分散相是水相，连续相是油相，水溶性单体液滴悬浮在油相中进行的聚合。聚合发生在液滴中，类似于溶液聚合。如丙烯酰胺的反相悬浮聚合，以甲苯为油相，偶氮二异丁腈为引发剂，丙烯酰胺水溶液组成单体液滴分散在甲苯中，分散剂为滑石粉或磷酸钙等。
CAS号：
性质： 分散相是水相，连续相是油相，水溶性单体液滴悬浮在油相中进行的聚合。聚合发生在液滴中，类似于溶液聚合。如丙烯酰胺的反相悬浮聚合，以甲苯为油相，偶氮二异丁腈为引发剂，丙烯酰胺水溶液组成单体液滴分散在甲苯中，分散剂为滑石粉或磷酸钙等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条