1) Fe_3Si reinforcement
Fe3Si增强相
2) reinforced phase
增强相
1.
The results showed that:the values measured specific resistance of Cu/Al2O3 and Cu/WC DSC were higher than their values calculated,the electric conductivity of both DSC decrease with the content increasing of reinforced phase and were similar when volume content of reinforced phase of both DSC were the same.
同一增强相含量越高,弥散强化铜导电性越低。
2.
Ceramic-reinforced phases formed alternately and mainly takes the shape of stick-strip or granular under SEM,which distribute continuously or dispersedly in NiAl matrix.
分析了反应发生过程以及增强相通过阻碍位错对基体的强化作用。
3) reinforcement
[英][,ri:ɪn'fɔ:smənt] [美]['riɪn'fɔrsmənt]
增强相
1.
Evaluation of Strength Grading the Board of Green Covering of Bamboo as the Reinforcement of Wind Turbine Blades Composite Materials
竹青板作为风电叶片复合材料增强相的性能评价
2.
It was shown that the ceramic composites were mixed homogeneously as well as the bonding interfaces of composites between the matrix and reinforcement were enhanced by this process, which improves the performance of the composites.
本文介绍了液相包覆技术制备涂层的一些基本方法及其在材料制备中的应用 ,表明该工艺使陶瓷材料获得了均匀混合 ,同时改善了复合材料基体相与增强相之间的界面状态 ,使复合材料性能得到提
3.
For diffusion wleding of aluminum matrix composite Al 2O 3p/6061 Al, the micro bonding behavior of weld zone between reinforcement and matrix (R M ), reinforcement and reinforcement (R R )was investigated.
研究表明 ,扩散焊接温度对接合区的微连接行为有显著影响 ,当焊接温度低于铝基复合材料固相线温度时 ,增强相—基体、增强相—增强相之间微连接属弱连接 ;当焊接温度介于该种材料液、固两相温度区间时 ,接头区域出现液态基体金属 ,增强相—基体之间可以实现较好结合 ,同时液态金属对增强相—增强相接触部位进行渗透 ,使增强相—增强相接触转化为增强相—基体—增强相结合 ,在此基础上发现在铝基复合材料液、固两相温度区间有“临界温度”存在 ,为成功实现该种材料扩散连接奠定理论基
4) WC reinforcement phase
WC增强相
5) reinforcing phase
增强相
1.
6%,respectively;the particles of reinforcing phase TiB2 and Al3Ti are distributed in the α-Al matrix uniformly and it demonstrates re.
采用透射电镜对(TiB2+Al3Ti)/ZL101原位复合材料中增强相组织、结构和分布进行了研究,测试了(TiB2+Al3Ti)/ZL101原位复合材料的力学性能。
2.
The results show that the size of reinforcing phase Al3Ti in the composite is about 0.
研究表明:在AlN-Al_3Ti/ZL101原位复合材料中,尺寸约为0 5μm的Al_3Ti增强相均匀弥散分布于α-Al晶粒内部,尺寸为30nm的AlN增强相弥散分布于共晶体内部。
3.
The experimental results show that the size of the reinforcing phase Al 3Ti of Al 3Ti/ZL101 in situ composite is 0.
采用透射电镜对 Al3Ti/ ZL 10 1原位复合材料中亚微米增强相 Al3Ti的形貌、结构和分布进行了研究 ,测试了 Al3Ti/ ZL 10 1原位复合材料的力学性能。
6) reinforcements
[英][,ri:ɪn'fɔ:smənt] [美]['riɪn'fɔrsmənt]
增强相
1.
Coatings were in-situ synthesized by using cored wires Fe-Al that added ceramic reinforcements and high velocity arc spraying(HVAS) technology.
采用添加增强相的Fe-Al粉芯丝材和高速电弧喷涂技术(HVAS)原位合成了复合涂层。
2.
Al2O3, WC and TiB2 were used as common reinforcements.
弥散强化铜(DSC)合金因为有一系列优良的性能而逐渐成为很多领域中不可替代的结构功能材料,常用的增强相一般有Al2O3,WC和TiB2,最近,又有一种新的Ti3SiC2陶瓷被用来作为增强相。
3.
In this paper we review binders used for preforms of discontinuous reinforcements,the effect of drying methods on the distribution of binders in preforms and progress in research on fabrication methods of performs.
综述了湿压法制备非连续增强相预制块所用粘结剂的种类和特性、预制块烘干方式对粘结剂分布的影响,以及湿压法制备预制块技术的研究进展;对目前预制块制备技术的发展方向进行了展望。
补充资料：Fe-Si alloy
分子式：
CAS号：
性质：含硅0.5％～4.5％的铁硅合金。为硅在铁中的置换固溶体，属立方晶系。饱和磁感应强度为1.6～1.9J，铁损1～8W/kg。除了冲片使用外，常做成薄带，卷绕成铁芯。采用冷轧或进而热处理的方法获取结构(晶粒定向排列)。电力工业中用于电机、变压器等。电子工业中主要用于电源变压器、磁放大器等。
CAS号：
性质：含硅0.5％～4.5％的铁硅合金。为硅在铁中的置换固溶体，属立方晶系。饱和磁感应强度为1.6～1.9J，铁损1～8W/kg。除了冲片使用外，常做成薄带，卷绕成铁芯。采用冷轧或进而热处理的方法获取结构(晶粒定向排列)。电力工业中用于电机、变压器等。电子工业中主要用于电源变压器、磁放大器等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条