1)  spinneret
纺丝板
2)  spinning
纺丝
1.
Study of spinning performance of phosphate flame reatrdant polyester;
磷系阻燃聚酯的纺丝性能研究
2.
Discussion on issues of smoke extraction of polyester filament spinning workshops;
涤纶长丝纺丝车间的排烟问题探讨
3.
Study on processing of shaped spinneret orifices and their effects on spinning;
异形喷丝板微孔对纺丝影响及其加工技术的研究
3)  spin
纺丝
1.
Discussion on spin process design of polyvinyl alcohol fibers with high tenacity;
高强聚乙烯醇纤维纺丝工艺设计的探讨
2.
The preparation process and stability of cellulose carbamate solution—a new spinning cellulose were studied.
该溶液经过渗透处理,不仅实现了纺丝液中CC与NaOH质量比≥1的要求,且溶液的黏性、稳定性都有所提高,可直接用于纺丝。
3.
The 16 ends spinning equipment and take-up machine were supplied by Dalian Synthetic Fiber Research Institute China and TMT Co.
主要介绍大连合成纤维研究所研制的16头纺丝设备及日本TMT公司16头全拉伸丝(FDY)卷绕机成功嫁接投产的情况。
4)  spinning process
纺丝工艺
1.
Improvement of spinning process for improving quality of fibril;
改进纺丝工艺 提高碳原丝质量
2.
The style and characteristics of equipments in the production of PET microfiber and the corresponding spinning process requirements were introduced in detail.
详细介绍生产涤纶微细旦丝装置中各设备型式、特点及相应的纺丝工艺要求,为获得稳态的纺丝过程,针对涤纶微细旦丝的特点,阐述了设备的适用性。
3.
, and the influence of different spinning process on structure properties of fibers were discussed elementarily.
采用DSC、X射线衍射和密度梯度管等技术研究了二醋酯纤维的结晶、取向等结构特性,初步探讨了不同纺丝工艺对纤维结构特性的影响,发现:二醋酯纤维存在两种晶型结构,结晶度和取向度都较低;以相同二醋片为原料时,纺丝工艺对纤维的结构特性有影响但不明显,而烟用纺丝工艺和纺织用纺丝工艺之间的差别对纤维结构特性的影响则相对较大。
5)  wet spinning
湿法纺丝
1.
Discussion on process technology of water-soluble PVA fiber via wet spinning;
湿法纺丝制备水溶性PVA纤维工艺探讨
2.
Preparation and wet spinning process for chitosan spinning dope;
壳聚糖纺丝原液制备及湿法纺丝工艺初探
3.
The PLA and 2%PEG+98%PLA filaments have been prepared by wet spinning with the solvent HFIP.
以HFIP为溶剂,通过湿法纺丝制得PLA和2%PEG+98%PLA纤维,并使用红外光谱和电子强力仪分别对其分子结构和力学性能进行表征。
6)  solution spinning
溶液纺丝
1.
The CC solution with 7% mass fraction was exposed to solution spinning in presence of 7% dilute sulfuric acid as coagulation bath after filtration and deaeration.
探索了尿素对纤维素氨基甲酸酯(CC)/氢氧化钠溶液(CC溶液)的增溶作用,考察了不同浓度CC溶液的流变性能,选择CC质量分数为7%的溶液经过滤、脱泡后,以7%的稀硫酸为凝固浴进行溶液纺丝。
2.
The characteristics of melt-spinning,solution spinning,electrospinning,supercritical fluid technique and gelation freeze-drying are summarized in detail,and the effect of molding process on the morphologic structure and performance of the fibers are discussed.
介绍了高强度、可控降解周期的聚乳酸及其共聚物、共混物纤维的成型方法和纤维的应用情况;阐述了熔融纺丝、溶液纺丝、静电纺丝、超临界流体法、凝胶冻干等纤维成型方法的特点;评价了成型工艺对纤维形态结构和性能的影响、研究聚乳酸纤维的新方法、新成果以及高性能聚乳酸纤维在生物医学领域、日用工业等领域的应用前景。
3.
PLA fibers can spin by two conventional methods: solution spinning and melt spinning.
聚乳酸纤维是可生物降解的新型绿色纤维,它可由常见的纤维成型加工工艺———溶液纺丝和熔融纺丝制得。
参考词条
补充资料：凹板印刷机用胶布板
分子式：
分子量：
CAS号：

性质：用于高速轮转凹版印刷机的胶布板。供印刷报纸、杂志、图书等。与凸版印刷机用胶布板的装置位置相同，不与油墨直接接触，但作用不同，通过橡皮表层的弹力作用，将凹沟内的油墨吸到纸张上。印刷时所受的压力较大，胶层须较厚。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。