1) equivalent hardened layer depth
当量硬化层深度
1.
Based on gears fatigue strength and wear resistance,the equivalent hardened layer depth of laser quenching compared with conventional heat treatment gears exceeds by far practical layer depth of laser hardening gears.
基于齿轮疲劳强度和耐磨性要求,激光淬火相当于常规淬火的“当量硬化层深度”远远超过激光淬火实际有效硬化层深度,由此提出激光淬火当量硬化层深的概念及其经验计算公式。
2) depth of hardened layer
硬化层深度
1.
When the grinding parameters are constant, the depth of hardened layer and.
结果表明:硬化层完全硬化区均由细小的孪晶马氏体和板条马氏体组成,且硬化层的组织形貌及显微硬度无显著变化,但硬化层略粗马氏体相的出现位置有所差异;在磨削用量恒定时,顺磨硬化层的深度以及最大残余压应力均大于逆磨硬化层;在磨削功率恒定时,采用逆磨方式可以获得更深的硬化层;与干磨相比,湿磨硬化层表面残余压应力有所提高,但其硬化层深度减少了约30%。
4) depth of hardening layers
硬化层深度
1.
Laser quenching, nitriding, nitriding-laser quenching compound treatment and laser quenching-nitriding compound treatment on 38CrMoAlA steels are carried out, and theirs depth of hardening layers and their surface hardness are investigated.
对 38CrMoAlA钢分别经激光淬火、气体氮化、氮化 激光淬火复合处理及激光淬火 氮化复合处理的硬化层深度及其表面硬度分布进行了比较分析。
5) hardened depth
硬化层深度
1.
The numerical simulation on the eddy signals was introduced by approaching method based on Finite Elements theory to predict the hardened depth.
用有限元法对非均匀介质的涡流检测信号进行了数值模拟,并针对检测信号采用逼近的方法预测了表面硬化层深度。
6) Hardening depth
硬化层深度
1.
On account of the wider scope of hardening depth,which can cover all thespecification of linear rolling guide,and six bends of hardening being harden.
结果表明当ｑ＿０＝３８００Ｍｐａ时，导轨的芯部硬度应不低于ＨＲＣ１７，表面硬化层深度应不小于７ｂ（滚珠导轨）和８ｂ（滚往导轨）。
补充资料：肝硬化性肾小球硬化
肝硬化性肾小球硬化
hepatocirrhotic glomerulosclerosis
肝脏病时，肠道内抗原通过侧支循环进入体循环，激发抗体生成，导致免疫复合物性肾炎，最终形成肾小球硬化。多见于肝硬化期，临床表现以肝病表现为主，肾脏病表现为次。晚期可有肝肾衰竭。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条