1.
and with constant working current,the lower scanning speed,the deeper harden layer depth and the higher hardness.
工作电流不变,扫描速度越低,硬化层深度越深、硬度越高。
2.
Determination of effective depth of hardening after induction or flame hardening of steel
GB/T5617-1985钢的感应淬火或火焰淬火后有效硬化层深度的测定
3.
Measurement on the carbonizing or nitro-caburizing harden case depth of sintering iron-based material
GB/T9095-1988烧结铁基材料渗碳或碳氮共渗硬化层深度的测定
4.
Finite Element Simulation of the Transient Temperature Field During Laser Surface Quenching and Forecasted Depth of the Hardness Layer;
激光表面淬火瞬态温度场的有限元模拟及硬化层深预测
5.
Microstructure and Depth of Harden Layer of 40Cr Steel Melting Treated with Different Lasers
不同激光器熔凝处理40Cr钢硬化层的显微组织及深度
6.
Online ENDT for hardness depth of iron and steel parts based on Online LS-SVM
基于Online LS-SVM的钢铁件淬硬层深度在线检测
7.
The lack of deep hardening in these alloys negates their use.
这些合金缺乏深层硬化能力使它们无法利用。
8.
A Study of Micro-hardness of Fe-Zn Alloy Obtained by Electroless Plating
化学镀Fe-Zn镀层的显微硬度实验研究
9.
Effects of Different Atmospheres on The Thickness And Hardness of Strenghened Coating;
环境介质对脉冲放电强化层厚度和硬度的影响
10.
Effect of hardening depth on wheel rail contact stress of port crane
硬化深度对港口起重机车轮接触应力的影响
11.
Effects of Silicon Carbide on the Cure Depth,Hardness and Compressive Strength of Composite Resin
碳化硅对复合树脂固化深度、硬度和压缩强度的影响
12.
This has been implications for the speification of case depth for gears.
这一情况已影响到齿轮硬层深度技术条件的确定。
13.
Design and Implementation of Hidden Surface Removal Hardware Based on Cache and Hierarchical Z-Buffer Algorithm for 3D Graphics
基于Cache和层次Z缓存算法的3维图形深度消隐硬件设计和实现
14.
Simulation Study on Fluidized Bed Carburizing Layer Depth Mathematic Model
流态化渗碳层深度数学模型仿真研究
15.
Implications of University System Culture and Countermeasures
大学制度文化的深层意蕴与应然态势
16.
The Study on the Surface Hardness of Deep Multicomponent Complex Diffusion in ZG1Cr18Ni9 Austenite Stainless Steel;
ZG1Cr18Ni9奥氏体不锈钢深层多元复合渗表面硬化的研究
17.
Micro Hardness Analysis for Micro-arc Oxidation(MAO) Films on AZ91D Die-casting Magnesium Alloy
AZ91D压铸镁合金微弧氧化膜层的显微硬度分析
18.
Effect of H_2SO_4 Concentration on the Quality of Hard Anodic Oxidation Film on Aluminum Alloy 6061
H_2SO_4浓度对6061硬质阳极氧化膜层质量的影响