1) cylindrical coordinate
圆柱坐标
1.
The Poisson solvers in polar and cylindrical coordinate systems are developed using Fourier-Chebyshev collocation spectral method based on matrix-matrix multiplication.
采用矩阵相乘的Fourier-Chebyshev配置点谱方法求解极坐标与圆柱坐标系下的泊松方程。
2.
According to fifteen sorts of eigenvalues,the specific solution to a type of homogeneous equation with harmonic operator of six steps polynomial in cylindrical coordinate is obtained by the variable method, and the method of determining the constant is given.
对圆柱坐标系下齐次6阶“多项式”形式的调和算子方程,按本征值分15种情况分别给出了其分离变量解的具体形式,给出常数的确定方法;并将结果推广到各种非齐次情况和非轴对称情况。
3.
The propagation modes in selfco fiber, which features the laguerre Gauss distributions,are derived by solving the helmholtz wave equation incylindrical coordinates.
从亥姆霍兹方程出发,导出了自聚焦光纤中传导模在圆柱坐标系中的场分布形式,并给出了几个低阶模的分布图。
2) cylindrical coordinates
圆柱坐标
1.
This paper presents the formula of subaperture overlapping by introducing cylindrical coordinates (θxr).
本文推导了圆柱坐标下的孔径拼接公式,并利用新的拼接公式模拟测量了一圆柱体面形。
3) cylindrical-coordinate system
圆柱坐标系
1.
Partitioning algorithm for N-S equations in relative/absolute cylindrical-coordinate systems and investigation on treatment for rotor-stator interaction;
动静圆柱坐标系下N-S方程的分区算法及子域干涉处理研究
2.
A new partitioning algorithm for Navier-Stokes equations in relative/absolute cylindrical-coordinate systems is presented.
通过耦合相对和绝对圆柱坐标系下的三维Navier-Stokes方程,本文采用高精度高分辨率的三阶ENN格式及LU-SGS隐式解法进行子域求解;提出了动静子域干涉面的重合处理与重叠处理,并最终发展了一种新的分区算法。
4) cylindrical coordinate system
圆柱坐标系
1.
Elaborated on a cylinder involute to deduce process gradually,carried on elaborate to the relation that change position cylinder gear specially finally apply cylindrical coordinate system of Pro/ENGINEER Wildfir3.
0的圆柱坐标系进行了圆柱渐开线齿轮的精确造型。
5) cylindrical coordinates
圆柱坐标系
1.
Based on FDTD difference expressions and eigenfunctions of Maxwell functions in cylindrical coordinates, mesh wave impedances (MWIs) in 2D and 3D cylindrical coordinates were introduced.
从圆柱坐标系下麦克斯韦方程的时域有限差分式和特征解出发 ,引入了二维和三维圆柱坐标系下网格波阻抗 (MWI) 。
2.
Based on Maxwell s equation, the paper develops a multi layer theory under 2 dimensional cylindrical coordinates and applies it to the analysis of a cylindrical linear induction morot.
本文从麦克斯韦方程出发,在圆柱坐标系下建立了圆筒型直线电机的多层理论分析模型,用该模型对一台样机进行实例计算,并与磁阻抗法和实验值进行了比较,计算结果表明该方法的正确性和有效
6) cylindrical coordinatograph
圆柱坐标仪
补充资料:55°圆柱管螺纹的型式和尺寸
螺纹代号 | 基本尺寸 | 大径 mm d=D | 螺距 mm p | 每英寸牙数 tpi | 中径 mm d2=D2 | 小径 外螺纹 d3 | 牙型高度 H1 | 底孔尺寸 mm | |
G 1/8 | 1/8" | 9.728 | 0.907 | 28 | 9.147 | 8.566 | 0.581 | 8.7 | |
G 1/4 | 1/4" | 13.157 | 1.337 | 19 | 12.301 | 11.445 | 0.856 | 11.6 | |
G 3/8 | 3/8" | 16.662 | 1.337 | 19 | 15.806 | 14.95 | 0.856 | 15 | |
G 1/2 | 1/2" | 20.955 | 1.814 | 14 | 19.793 | 18.631 | 1.162 | 19 | |
G 5/8 | 5/8" | 22.911 | 1.814 | 14 | 21.749 | 20.587 | 1.162 | 20.75 | |
G 3/4 | 3/4" | 26.441 | 1.814 | 14 | 25.279 | 24.117 | 1.162 | 24.5 | |
G 7/8 | 7/8" | 30.201 | 1.814 | 14 | 29.039 | 27.877 | 1.162 | 28 | |
G 1 | 1" | 33.249 | 2.309 | 11 | 31.77 | 30.291 | 1.479 | 30.5 | |
G 1 1/8 | 1 1/8" | 37.897 | 2.309 | 11 | 36.418 | 34.939 | 1.479 | 35 | |
G 1 1/4 | 1 1/4" | 41.91 | 2.309 | 11 | 40.431 | 38.952 | 1.479 | 39.5 | |
G 1 3/8 | 1 3/8" | 44.323 | 2.309 | 11 | 42.844 | 41.365 | 1.479 | 41.5 | |
G 1 1/2 | 1 1/2" | 47.803 | 2.309 | 11 | 46.324 | 44.845 | 1.479 | 45 | |
G 1 3/4 | 1 3/4" | 53.746 | 2.309 | 11 | 52.267 | 50.788 | 1.479 | 51 | |
G 2 | 2" | 59.614 | 2.309 | 11 | 58.135 | 56.656 | 1.479 | 57 | |
G 2 1/4 | 2 1/4" | 65.71 | 2.309 | 11 | 64.231 | 62.752 | 1.479 | 63 | |
G 2 1/2 | 2 1/2" | 75.184 | 2.309 | 11 | 73.705 | 72.226 | 1.479 | 72.5 | |
G 2 3/4 | 2 3/4" | 81.534 | 2.309 | 11 | 80.055 | 78.576 | 1.479 | 79 | |
G 3 | 3" | 87.884 | 2.309 | 11 | 86.405 | 84.926 | 1.479 | 85.5 | |
G 3 1/4 | 3 1/4" | 93.98 | 2.309 | 11 | 92.501 | 91.022 | 1.479 | 91 | |
G 3 1/2 | 3 1/2" | 100.33 | 2.309 | 11 | 98.351 | 97.372 | 1.479 | 97.75 | |
G 3 3/4 | 3 3/4" | 106.68 | 2.309 | 11 | 105.201 | 103.722 | 1.479 | 104 | |
G 4 | 4" | 113.03 | 2.309 | 11 | 111.55 | 110.072 | 1.479 | 110.5 | |
G 4 1/2 | 4 1/2" | 125.73 | 2.309 | 11 | 124.251 | 122.772 | 1.479 | 123 | |
G 5 | 5" | 138.43 | 2.309 | 11 | 136.951 | 135.472 | 1.479 | 136 | |
G 5 1/2 | 5 1/2" | 151.13 | 2.309 | 11 | 149.651 | 148.172 | 1.479 | 148.5 | |
G 6 | 6" | 163.83 | 2.309 | 11 | 162.351 | 160.872 | 1.479 | 161.5 |
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条