1) Ni-based composite coating
镍基复合材料涂层
2) nickel-base
镍基
1.
Recent Progress in the Research on Nickel-base Composite Coatings;
镍基复合镀层研究的最新进展
2.
In this paper,the research achievements on self-lubricating nickel-based composite coatings in recent years are overviewed.
本文主要对近几年国内外在镍基自润滑复合镀层方面取得的研究成果进行了概述。
3.
It shows that CaF2 is the major lubricant during friction process,The nickel-base composite has good high-temperature self-lubrication due to the forming of CaF2 lubricating film and transferring film on the friction surfaces.
本文对一种新型热压Ni-Cu-CaF_2自润滑材料的摩擦学特性进行了研究,结果表明,在摩擦过程中,CaF_2是主要的固体润滑剂,由于CaF_2能在摩擦表面形成润滑膜和转移膜,从而使得这种镍基复合材料具有良好的高温自润滑性能。
3) nickel-based
镍基
1.
Solidification cracking is a critical problem during the welding of nickel-based corrosion-resistance materials.
镍基耐蚀材料的焊接结晶裂纹是该类材料焊接性研究中的关键性问题。
2.
In this paper,the discovery of a novel amorphous skeletal nickel-based alloy(SRNA) and its use in magnetically stabilized bed (MSB) is introduced.
报道了开发镍基非晶态合金加氢催化剂的实验室研究、中试研究及工业应用研究结果。
4) Nickel base
镍基
1.
Determination of Trace B in Nickel Base,Iron-Nickel Base High Temperature Alloy and Structure Steel;
ICP-AES法测定镍基、铁镍基高温合金与结构钢中的微量硼
2.
Preparation and performance of nickel based catalyst for first-stage hydrogenation of pyroysis gasoline;
镍基裂解汽油一段加氢催化剂的制备及性能
3.
The welding process of nickel base welding wire for tube to tube sheet used in HP heater of 330 MW and above power unit has been described in the article.
文章介绍了330MW及以上机组高压加热器管子与管板采用镍基焊丝的焊接工艺。
5) nickel-based alloy
镍基合金
1.
Studies of static recrystallization of new nickel-based alloy;
新型镍基合金静态再结晶规律研究
2.
The preparation for nickel-based alloys coating as institution of electro-plating brass coating on Q235 steel base used in metal rubber compound products is investigated.
研究用于金属橡胶复合制品的Q235钢基体上制备替代电镀黄铜层的化学镀镍基合金层。
6) nickel-base alloy
镍基合金
1.
Determination of trace elements in steel, nickel-base alloy and zircaloy using time of flight inductively coupled plasma mass spectrometry;
飞行时间-电感耦合等离子体质谱法测定钢、镍基合金及锆锡合金中痕量元素(英文)
2.
This paper was based on engineering practice experience, nickel-base alloy, graphite and F4-lined steelhad been applicated in fluorination for a long time, their use condition and anticorrosion instances were introduced.
本文依据工程实践经验,介绍了镍基合金、石墨、钢衬聚四氟乙烯三种材料的应用防腐情况、使用条件,对于氟化选材有指导意义。
3.
The high-chromium cast iron and nickel-base alloy Ni60 have been studied.
以高铬铸铁和镍基合金Ni60作为研究对象,研究了金相组织对耐磨性的影响。
参考词条
补充资料：等离子喷涂羟基磷灰石涂层-钛复合材料
分子式：
CAS号：
性质：是用等离子喷涂技术在医用金属钛或其合金表面加涂羟基磷灰石所制得的医用涂层材料。主要用于承力部位的硬组织修复和替换，如制作人工种植牙、关节柄和接骨板等。由于表面涂层赋予了表面生物活性，植入骨内后能与骨直接形成骨键合，手术中可不用骨水泥固定。为使涂层能在生物环境中保持稳定和涂层-基体界面具有足够的结合强度，要求涂层的羟基磷灰石含量达90％以上并具有高的结晶度。另外，钴基合金也可作为这种涂层材料的基材。
CAS号：
性质：是用等离子喷涂技术在医用金属钛或其合金表面加涂羟基磷灰石所制得的医用涂层材料。主要用于承力部位的硬组织修复和替换，如制作人工种植牙、关节柄和接骨板等。由于表面涂层赋予了表面生物活性，植入骨内后能与骨直接形成骨键合，手术中可不用骨水泥固定。为使涂层能在生物环境中保持稳定和涂层-基体界面具有足够的结合强度，要求涂层的羟基磷灰石含量达90％以上并具有高的结晶度。另外，钴基合金也可作为这种涂层材料的基材。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。