1) Plastic deformation work
塑性变形功
2) plastic deformation / elastic-plastic deformation work
塑性变形/弹-塑性变形功
3) Work of plastic deformation per unit volume
单位体积的塑性变形功
4) plastic deformation
塑性变形
1.
Effect of particle shape on uniaxial ratcheting of SiC_P/6061Al composites and its microscopic plastic deformation characteristics;
颗粒形状对复合材料单轴棘轮行为及其细观塑性变形特征的影响
2.
Self-healing mechanism of inner crack in plastic deformation under high temperature;
高温塑性变形中孔隙性缺陷自修复机理
3.
Plastic Deformation of a Mg-based Bulk Amorphous Alloy in Supercooled Liquid Region;
镁基大块非晶合金在深过冷液相区的塑性变形
5) plastic forming
塑性变形
1.
The law of the microstructure transformation of SiC p/Al composite based on powder metallurgy in hot plastic forming is investigated.
实验研究了基于 PM的 Si Cp/Al复合材料在热塑性变形过程中显微组织的变化规律。
6) plastic deformation
塑性形变
1.
It was shown that the specific essential work (we) and specific plastic work (βwp) increased with the addition of EPDM and/or POE, which suggested that the elastermer had improved the material’s ability to resist crack propagation and produce plastic deformation.
结果表明,加入EPDM或POE后,共混物的比基本断裂功we和比塑性形变功βwp均有提高,说明弹性体的加入提高了材料抵抗裂纹扩展的能力和发生塑性形变的能力。
2.
Under the suitable condition, plastic deformation at the bonding interface happened, the contact area increased, and the diffusion bonding was completed with the pores at the bonding interface being eliminated or significantly reduced.
结果表明 :采用适当的连接工艺 ,可使此种材料产生塑性形变 ,接触面积增加 ,空洞收缩和闭合 ,扩散进行充分 。
3.
Under the condition of proper speed and temprature, the plastic deformation curves of ABS blends added with different lubricants were determined by using HAAKE- 9000 RHEOMETER.
采用HAAKE-9000型扭矩流变仪,在一定转速和温度下,测定了添加不同润滑剂时ABS体系的塑性形变曲线,对各种曲线进行分析,并研究了润滑剂的种类和用量对ABS力学性能和热性能的影响。
补充资料：变形功
分子式：
CAS号：
性质：使物料变形粉碎所做的功。在打击或冲击下粉碎时，粉碎工具或物料的动能迅速转变为物料的变形功，产生较大的应力集中，导致物料破碎。
CAS号：
性质：使物料变形粉碎所做的功。在打击或冲击下粉碎时，粉碎工具或物料的动能迅速转变为物料的变形功，产生较大的应力集中，导致物料破碎。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条