1) revere plastic deformation
强塑性形变
2) severe plastic deformation
强塑性变形
1.
Effect of annealing process on microstructure and mechanical properties of severe plastic deformation pearlitic steel wire;
退火工艺对强塑性变形珠光体钢丝组织和性能的影响
2.
Mechanism of re-dissolution and re-precipitation of second phases in Al-Zn-Mg-Cu alloy under severe plastic deformation;
室温强塑性变形下回溶和再析出的机理研究
3.
During the last two decades, severe plastic deformation (SPD)has emerged as a widely-known procedure for the fabrication of ultrafine-grained metals and alloys.
在过去20年中,强塑性变形技术作为制备超细晶金属及其合金的一种方法被广泛研究。
3) severe plastic deformation
强烈塑性变形
1.
Progress in developing superplasticity materials by severe plastic deformation;
强烈塑性变形超塑材料研究进展
2.
The processes and principles on nano-structured materials prepared by severe plastic deformation(SPD) methods such as severe plastic deformation consolidation (SPDC) Equal Channel Angle Pressing(ECAP) and surface self-nanocrystallization are reviewed by analysis of the deformation characteristics.
通过分析变形特点,综述压制球磨粉末(SPDC)、等径角挤压(ECAP)和自身表面纳米化3种通过强烈塑性变形制备纳米晶体材料的原理与方法,分析强烈塑性变形的组织细化机制及所获得的纳米晶体材料的结构与性能特征,指出该研究领域所存在的问题和今后的发展方向。
3.
It is found that the precipitates are deformed, fragmented, and followed by dissolution into the matrix to form supersaturated solid solution in severe plastic deformation process.
利用透射电镜和硬度测量实验手段 ,研究了多相Al Zn Mg Cu合金在强烈塑性变形中的组织和性能变化 ,特别是析出相的改变。
4) intense plastic strain
强烈塑性变形
1.
ECAP(equal channel angular processing) is a processing procedure in which a sample is subjected to a very intense plastic strain by pressing it through a special die.
等径弯曲通道变形 (equalchannelangularprocessing,ECAP)是使材料经受强烈塑性变形的一种加工方法 。
5) heavily cold-drawn deformation
强烈冷拉塑性变形
6) heavily drawn plastic deformation
强烈拉伸塑性变形
1.
Under heavily drawn plastic deformation, we made nano-structured high strength pearlitic steel reinforced polymer urethanes composites, and investigated the composites' three-body abrasive wear mechanism.
用强烈拉伸塑性变形法制备纳米结构高强度珠光体钢丝,将其与聚氨酯复合制备复合材料,并研究了该复合材料的三体磨料磨损性能。
补充资料：瞬间塑性形变
分子式：
CAS号：
性质：物体受负荷作用而形变。当外力消除后，有一部分形变在瞬间得以消除。而另一部分则是随时间而逐渐在恢复中。这部分就统称为瞬间塑性形变。它是时间的函数。例如测定洛氏硬度，是使钢球压人试阵后，规定卸载后15s读取形变值。该值既包含了该时之瞬间塑性形变量，也会有可能出现的永久塑性形变的量。
CAS号：
性质：物体受负荷作用而形变。当外力消除后，有一部分形变在瞬间得以消除。而另一部分则是随时间而逐渐在恢复中。这部分就统称为瞬间塑性形变。它是时间的函数。例如测定洛氏硬度，是使钢球压人试阵后，规定卸载后15s读取形变值。该值既包含了该时之瞬间塑性形变量，也会有可能出现的永久塑性形变的量。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条