1) concentrated emulsion copolymerization
超浓乳液共聚
1.
Study on the stability of PUAG-St concentrated emulsion copolymerization;
PUAG-St超浓乳液共聚稳定性的研究
2) concentrated emulsion polymerization
超浓乳液聚合
1.
Research status of stability of concentrated emulsion polymerization system;
超浓乳液聚合体系稳定性的研究
2.
The concentrated emulsion polymerization using nonionic polymerizable polyurethane (PUAG)/ styrene (St) as mixture monomers was studied.
研究了以非离子型可聚合聚氨酯(PUAG)和苯乙烯(St)为混合单体的超浓乳液聚合,并且考察了n(NCO)/n(OH)摩尔比、复合乳化剂体系质量浓度[E]、不同乳化剂的种类、引发剂质量浓度[I]、单体体积分数(或分散相体积分数,也称内相比Φ)、聚合温度等因素对聚合稳定性、动力学的影响。
3.
The molecular weight distribution, conversion rate, particle size, shape and distribution of the concentrated emulsion polymerization system were studied.
讨论了超浓乳液的相行为与稳定性及各自的影响因素,总结了超浓乳液聚合的相对分子质量分布、转化率与乳胶粒子大小及形态的影响因素。
3) concentrated emulsion
超浓乳液
1.
Formation, nature and application of concentrated emulsion;
超浓乳液的形成、性质及应用
2.
Stable concentrated emulsion of MMA/BMA/St was prepared by using sodium dodecyl sulfate(SDS) and hexadecamol(HD) as the compound emulsifier, with Azobisisobutyronitrile(AIBN) as initiator, the concentrated emulsion was polymerized at 40 ℃～45 ℃ which the volume fraction of the dispersed phase can be over 85%.
以十二烷基硫酸钠(SDS)和十六醇(HD)为复合乳化体系,偶氮二异丁腈(AIBN)为引发剂,甲基丙烯酸甲酯(MMA)/甲基丙烯酸丁酯(BMA)/苯乙烯(St)为混合单体,在40℃~45℃引发聚合,制备了分散相占85%以上的稳定超浓乳液。
3.
In this paper,the definition and preparation of concentrated emulsion wereintroduced.
本文主要介绍了超浓乳液的定义和制备方法。
4) emulsion copolymerization
乳液共聚
1.
Study on emulsion copolymerization of methyl methacrylate and N-p-tolylmaleimide;
MMA/N-对甲苯基马来酰亚胺乳液共聚的研究
2.
In order to prepare the crosslinking polymer microbeads, the free radical emulsion copolymerization of methylmethacrylate (MMA), acrylonitrile (AN) and divinylbenzene (DVB) with the initiator potassium persulphate (KPS) at 75℃ under constant stirring speed was investigated.
为制备甲基丙烯酸甲酯(MMA)-丙烯腈(AN)-二乙烯基苯(DVB)刚性微粒,在75℃、过硫酸钾(KPS)作引发剂、恒搅拌速率下研究了MMA/AN/DVB乳液共聚动力学,考察了KPS用量、单体配比、交联剂DVB对共聚速率的影响。
3.
VAc/VeoVa10 emulsion copolymerization was studied using sodium dodecyl sulfonate (SDS) as an emulsifier, potassium persulfate (KPS) as an initiator and PVA as a protective colloid.
以十二烷基硫酸钠为乳化剂,聚乙烯醇为保护胶体,过硫酸钾为引发剂,进行醋酸乙烯酯-叔碳酸乙烯酯(VAc-VeoVa10)乳液共聚。
5) Copolymerization emulsion
共聚乳液
1.
Comb-branched waterborne polyurethane/poly(isobornyl acrylate)(CWPU/PIA ) copolymerization emulsion was prepared,with isobornyl acrylate(IBOA) as the monomer and with CWPU as the dispersant.
以丙烯酸异冰片酯(IBOA)为单体、梳状水性聚氨酯(CWPU)预聚物为分散剂,制备了梳状水性聚氨酯/聚丙烯酸异冰片酯(CWPU/PIA)共聚乳液。
2.
With vinyl acetate(VAc),acrylic acid(AA) and methyl methacrylate(MMA) as raw material,so a fast drying adhesive for cigarette based on VAc/AA/MMA copolymerization emulsion was prepared.
以醋酸乙烯酯(VAc)、丙烯酸(AA)和甲基丙烯酸甲酯(MMA)等为原料合成了一种快干卷烟胶用三元共聚乳液。
6) copolymerized emulsion
共聚乳液
1.
Study of four-substance copolymerized emulsion of methacrylic acid system;
甲基丙烯酸系四元共聚乳液的研制
2.
The multicomponent copolymerized emulsion was prepared by emulsion copolymerization with methyl methacrylate,butyl acrylate,styrene and acrylic acid as copolymerized monomers.
以甲基丙烯酸甲酯、丙烯酸丁酯、苯乙烯和丙烯酸为共聚单体 ,经乳液共聚合反应制得四元共聚乳液 。
补充资料：浓氯化钠注射液 ,高渗氯化钠注射液,高张氯化钠注射液
药物名称：浓氯化钠注射液
英文名：Injection 10% Sodium Chloride
别名：浓氯化钠注射液 ,高渗氯化钠注射液,高张氯化钠注射液
外文名： Injection 10% Sodium Chloride, Hypertonic saline
适应症： 用于脱水症及调节体内水与电解质的平衡。
用量用法： 静脉滴注，临用前稀释，用量与浓度视病情需要而定。
注意事项： 心、肾功能不全者慎用。
规格： 注射剂：１ｇ／１０ｍｌ，本品为氯化钠的高渗灭菌水溶液。
类别：调节水、电解质及酸碱平衡药
英文名：Injection 10% Sodium Chloride
别名：浓氯化钠注射液 ,高渗氯化钠注射液,高张氯化钠注射液
外文名： Injection 10% Sodium Chloride, Hypertonic saline
适应症： 用于脱水症及调节体内水与电解质的平衡。
用量用法： 静脉滴注，临用前稀释，用量与浓度视病情需要而定。
注意事项： 心、肾功能不全者慎用。
规格： 注射剂：１ｇ／１０ｍｌ，本品为氯化钠的高渗灭菌水溶液。
类别：调节水、电解质及酸碱平衡药
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条