1) super-concentrated inverse emulsion
超浓反相乳液
2) concentrated emulsion
超浓乳液
1.
Formation, nature and application of concentrated emulsion;
超浓乳液的形成、性质及应用
2.
Stable concentrated emulsion of MMA/BMA/St was prepared by using sodium dodecyl sulfate(SDS) and hexadecamol(HD) as the compound emulsifier, with Azobisisobutyronitrile(AIBN) as initiator, the concentrated emulsion was polymerized at 40 ℃～45 ℃ which the volume fraction of the dispersed phase can be over 85%.
以十二烷基硫酸钠(SDS)和十六醇(HD)为复合乳化体系,偶氮二异丁腈(AIBN)为引发剂,甲基丙烯酸甲酯(MMA)/甲基丙烯酸丁酯(BMA)/苯乙烯(St)为混合单体,在40℃~45℃引发聚合,制备了分散相占85%以上的稳定超浓乳液。
3.
In this paper,the definition and preparation of concentrated emulsion wereintroduced.
本文主要介绍了超浓乳液的定义和制备方法。
3) inverse emulsion
反相乳液
1.
Synthesis of maleic acid esters polymerizable emulsifier and its application in inverse emulsion polymerization;
马来酸酯类可聚合乳化剂在反相乳液聚合中的应用
2.
Kinetics of graft copolymerization of acrylamide onto cassava starch in a five-component system of inverse emulsion;
反相乳液五元体系淀粉接枝共聚反应动力学
3.
Syntheses of starch-g-PAM flocculating agent by inverse emulsion polymerization and its application;
Starch-g-PAM絮凝剂的反相乳液合成及应用研究
4) inverse emulsion polymerization
反相乳液
1.
Preparation of salt-tolerant superabsorbent resin by inverse emulsion polymerization;
反相乳液聚合制备耐盐性高吸水性树脂
2.
A high water-absorbing copolymer resin were synthesized from phoenix tree leaves,AA and AM,using N,N'-methylene-bis-acrylamide as the crosslinking agent and in inverse emulsion polymerization condition.
以梧桐树叶为原料,接枝丙烯酸和丙烯酰胺,N,N’-亚甲基双丙烯酰胺(MBAA)为交联剂,采用反相乳液聚合方法制备具有立体网状结构的高吸水性树脂。
5) concentrated emulsion polymerization
超浓乳液聚合
1.
Research status of stability of concentrated emulsion polymerization system;
超浓乳液聚合体系稳定性的研究
2.
The concentrated emulsion polymerization using nonionic polymerizable polyurethane (PUAG)/ styrene (St) as mixture monomers was studied.
研究了以非离子型可聚合聚氨酯(PUAG)和苯乙烯(St)为混合单体的超浓乳液聚合,并且考察了n(NCO)/n(OH)摩尔比、复合乳化剂体系质量浓度[E]、不同乳化剂的种类、引发剂质量浓度[I]、单体体积分数(或分散相体积分数,也称内相比Φ)、聚合温度等因素对聚合稳定性、动力学的影响。
3.
The molecular weight distribution, conversion rate, particle size, shape and distribution of the concentrated emulsion polymerization system were studied.
讨论了超浓乳液的相行为与稳定性及各自的影响因素,总结了超浓乳液聚合的相对分子质量分布、转化率与乳胶粒子大小及形态的影响因素。
6) concentrated emulsion template
超浓乳液模板
补充资料：反相乳液聚合
分子式：
CAS号：
性质： 是将水溶性单体分散在连续油相中，形成油包水型(W/O)乳液，然后加入油溶性或水溶性引发剂引发的聚合。乳化剂为亲油性较强的低HLB值(HLB值为3～6)的乳化体系。如聚丙烯酰胺胶乳的生产。
CAS号：
性质： 是将水溶性单体分散在连续油相中，形成油包水型(W/O)乳液，然后加入油溶性或水溶性引发剂引发的聚合。乳化剂为亲油性较强的低HLB值(HLB值为3～6)的乳化体系。如聚丙烯酰胺胶乳的生产。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条