潜热储蓄,Latent heat storage,在线英语词典,英文翻译,专业英语

1) Latent heat storage

潜热储蓄

2) latent heat

潜热

Application of a New Model for Latent Heat Treatment to Simulation on Microsegregation;

一种新型潜热处理模型显微偏析数值模拟的应用

Treatment of latent heat in calculations for solidification of heavy castings;

大型铸件凝固计算中的潜热处理方法

The effect of composition on the latent heat of solidification for the Al-Cu alloy;

Al-Cu合金成分变化对其凝固潜热影响的研究

3) Latent heat of fusion

熔化潜热

%) and Al-28%Mg-14%Zn alloys used for thermal energy storage applications,such as the specific heat capacity including solid and liquid state;the mass density in the temperature range 30～500℃;the melting temperature and the latent heat of fusion.

利用差示扫描量热仪(DSC)和H-90型膨胀仪,对潜热储能材料A l-34%Mg-6%Zn和A l-28%Mg-14%Zn合金的热物性参数进行了测定,如固、液态时的比热容,30~500℃间的质量密度,熔化温度和熔化潜热等。

We report the calculated results of the latent heat of fusion Δμ ls and the melting temperature T m as a function of cluster size.

给出了团簇熔化潜热和熔点随团簇尺寸的变化关系 ,表明团簇熔化潜热和熔点强烈依赖于团簇的原子数。

4) latent heat

融化潜热

The paper mainly introduces some important property parameters of food concerned with cold process and related formula,such as water ratio,density,latent heat,breathing heat,specific heat,heat conductivity,heat diffusivity,etc.

本文主要介绍了与食品冷加工过程有关的几个重要物性参数及相关的计算公式,如含水率、密度、融化潜热、呼吸热、比热、导热系数、热扩散系数等,对于设计食品的制冷、冻结及冷链系统有重要的作用。

5) Transformation Latent Heat

相变潜热

Ti 50 Ni 40 Cu 10 alloy is prepared and its transformation latent heats and hysteresis under conditions of various heat treatment processes and thermal cycling times are systematically investigated by differential scanning calorimeter (DSC).

结果表明 ,马氏体相变潜热ΔHB2→B1 9和逆马氏体相变潜热ΔHB1 9→B2 随固溶温度的升高而明显降低 ,随退火温度的升高略微降低。

6) latent heat efficiency

潜热效率

Sensible heat efficiency,latent heat efficiency and dehumidification coefficient of performance(DCOP) were employed to evaluate the performance of silica gel wheel and lithium chloride wheel.

以显热效率、潜热效率和除湿性能系数作为评价指标,通过实验比较了硅胶和氯化锂转轮的除湿性能,研究了运行参数(处理空气进口湿度、温度,再生温度,处理风量)对转轮除湿性能的影响。

The influences of sensible heat efficiency and latent efficiency on total heat efficiency in diffe-rent climatic areas of China were determined according to weight coefficients of sensible heat efficiency and latent heat efficiency,showing that the weight coefficient of latent heat eff.

以板式全热交换器为例,通过推导全热交换器的显热、潜热和全热3种效率之间的关系式,用权重系数的概念分析了在我国不同地区气象条件下,显热效率和潜热效率对全热效率的影响程度。

The relational expression for total heat efficiency,sensible heat efficiency and latent heat efficiency of total heat exchanger is established with weight coefficient method.

利用权重系数建立了全热换热器的全热效率、显热效率及潜热效率三者的关系式,根据显热、潜热效率权重系数判定显热效率、潜热效率对全热换热器全热效率的影响程度。

参考词条

潜热储热潜热换热蒸发潜热汽化潜热潜热蒸发潜热负荷潜热系数气化潜热潜热传热潜热贮热 G（Gr）空间梯度差分

补充资料：储蓄种类

储蓄种类

　　分，有随存随取、整存整取、零存整取、整存零取和存本取息等类;按利息支付方式划分，有保本保值、有息和有奖等类。改革开放以后，我国储蓄种类有较大发展，增加了活期储蓄异地通存通取、独生子女储蓄、存贷结合的专项储蓄、代发工资储蓄、外币储蓄、养老返本储蓄等多种储蓄。随着商品经济的不断发展，储蓄种类还将不断增加。【储，种类】银行办理储蓄存款的具体形式和办法。人们参加储蓄的时间、方式是不同的，银行为满足不同储户的要求要采取不同类型的储蓄，储蓄种类有不同的划分。按存款期限划分，有活期和定期两类;按存取款方式划
　　

说明：补充资料仅用于学习参考，请勿用于其它任何用途。

首页 \| 翻译 \| 影视 \| 论坛 \| 索引结晶潜热析蜡潜热潜热通量熔解潜热凝固潜热潜热处理

1) Latent heat storage 潜热储蓄 2) latent heat 潜热 1. Application of a New Model for Latent Heat Treatment to Simulation on Microsegregation; 一种新型潜热处理模型显微偏析数值模拟的应用 2. Treatment of latent heat in calculations for solidification of heavy castings; 大型铸件凝固计算中的潜热处理方法 3. The effect of composition on the latent heat of solidification for the Al-Cu alloy; Al-Cu合金成分变化对其凝固潜热影响的研究 3) Latent heat of fusion 熔化潜热 1. %) and Al-28%Mg-14%Zn alloys used for thermal energy storage applications,such as the specific heat capacity including solid and liquid state;the mass density in the temperature range 30～500℃;the melting temperature and the latent heat of fusion. 利用差示扫描量热仪(DSC)和H-90型膨胀仪,对潜热储能材料A l-34%Mg-6%Zn和A l-28%Mg-14%Zn合金的热物性参数进行了测定,如固、液态时的比热容,30~500℃间的质量密度,熔化温度和熔化潜热等。 2. We report the calculated results of the latent heat of fusion Δμ ls and the melting temperature T m as a function of cluster size. 给出了团簇熔化潜热和熔点随团簇尺寸的变化关系 ,表明团簇熔化潜热和熔点强烈依赖于团簇的原子数。 4) latent heat 融化潜热 1. The paper mainly introduces some important property parameters of food concerned with cold process and related formula,such as water ratio,density,latent heat,breathing heat,specific heat,heat conductivity,heat diffusivity,etc. 本文主要介绍了与食品冷加工过程有关的几个重要物性参数及相关的计算公式,如含水率、密度、融化潜热、呼吸热、比热、导热系数、热扩散系数等,对于设计食品的制冷、冻结及冷链系统有重要的作用。 5) Transformation Latent Heat 相变潜热 1. Ti 50 Ni 40 Cu 10 alloy is prepared and its transformation latent heats and hysteresis under conditions of various heat treatment processes and thermal cycling times are systematically investigated by differential scanning calorimeter (DSC). 结果表明 ,马氏体相变潜热ΔHB2→B1 9和逆马氏体相变潜热ΔHB1 9→B2 随固溶温度的升高而明显降低 ,随退火温度的升高略微降低。 6) latent heat efficiency 潜热效率 1. Sensible heat efficiency,latent heat efficiency and dehumidification coefficient of performance(DCOP) were employed to evaluate the performance of silica gel wheel and lithium chloride wheel. 以显热效率、潜热效率和除湿性能系数作为评价指标,通过实验比较了硅胶和氯化锂转轮的除湿性能,研究了运行参数(处理空气进口湿度、温度,再生温度,处理风量)对转轮除湿性能的影响。 2. The influences of sensible heat efficiency and latent efficiency on total heat efficiency in diffe-rent climatic areas of China were determined according to weight coefficients of sensible heat efficiency and latent heat efficiency,showing that the weight coefficient of latent heat eff. 以板式全热交换器为例,通过推导全热交换器的显热、潜热和全热3种效率之间的关系式,用权重系数的概念分析了在我国不同地区气象条件下,显热效率和潜热效率对全热效率的影响程度。 3. The relational expression for total heat efficiency,sensible heat efficiency and latent heat efficiency of total heat exchanger is established with weight coefficient method. 利用权重系数建立了全热换热器的全热效率、显热效率及潜热效率三者的关系式,根据显热、潜热效率权重系数判定显热效率、潜热效率对全热换热器全热效率的影响程度。参考词条潜热储热潜热换热蒸发潜热汽化潜热潜热蒸发潜热负荷潜热系数气化潜热潜热传热潜热贮热 G（Gr）空间梯度差分补充资料：储蓄种类储蓄种类　　分，有随存随取、整存整取、零存整取、整存零取和存本取息等类;按利息支付方式划分，有保本保值、有息和有奖等类。改革开放以后，我国储蓄种类有较大发展，增加了活期储蓄异地通存通取、独生子女储蓄、存贷结合的专项储蓄、代发工资储蓄、外币储蓄、养老返本储蓄等多种储蓄。随着商品经济的不断发展，储蓄种类还将不断增加。【储，种类】银行办理储蓄存款的具体形式和办法。人们参加储蓄的时间、方式是不同的，银行为满足不同储户的要求要采取不同类型的储蓄，储蓄种类有不同的划分。按存款期限划分，有活期和定期两类;按存取款方式划　　说明：补充资料仅用于学习参考，请勿用于其它任何用途。
©2008 dictall.com