1) composite materials
钢基铝蜂窝夹芯复合板
2) steel matrix
钢基
1.
The composite of Fe/Al2O3 gradient coatings on steel matrix was prepared by spraying and sol-gel and the performances of the composite were investigated.
用喷涂法和溶胶-凝胶法相结合的工艺制备钢基Fe/Al2O3梯度复合材料,并对其性能进行分析。
3) steel substrate
钢基
1.
In this paper, the negative factors effecting the deposition of diamond films on steel substrates are introduced, and intermediate layers improving diamond films quality and adhesion on substrate are reviewed.
介绍了影响钢基表面金刚石薄膜沉积的不利因素,分析和综述了近10年来在提高金刚石薄膜质量以及薄膜粘结性等方面所采用的各种中间过渡层及其研究进展。
2.
As a result, a TiCFe cermet coating with a thickness of 10 mm was simultaneously synthesized on the steel substrate during its casting.
采用X射线衍射(XRD)确定了合成涂层的相组成,并分别用光学显微镜(OM),扫描电镜(SEM)和电子探针(EPMA)分析了涂层的显微组织及其与钢基体的界面结构。
4) steel substrate
钢基体
1.
The present state of Al2O3 ceramic coating on steel substrate is summarized in this article,and some particular methods in the preparation are introduced,such as Hot Spray,Sol-Gel and thermo chemistry reaction,their excellence and disadvantage are also discussed and analyzed.
综述了目前钢基体上制备Al2O3陶瓷涂层的研究现状,详细介绍了热喷涂法、溶胶-凝胶法及热化学反应法3种制备Al2O3陶瓷涂层的主要方法,并探讨和分析了它们各自的优缺点。
2.
The bonding strength between cermet cladding and steel substrate was expressed using the bonding strength of two bonded steel plates bonded by cermet cladding material.
根据液相烧结三元硼化物基金属陶瓷覆层材料的工艺特点,用金属陶瓷覆层将两钢板进行液相烧结连结,以覆层对两钢板的连结强度表征覆层与钢基体的结合强度。
5) steel matrix
钢基体
1.
A variety of experiment techniques were used to investigate the interactions between tungsten carbide particle and the steel matrix.
用电冶熔铸工艺制备不同WC含量的WC/钢复合材料,研究了WC颗粒在复合材料钢基体中的溶解行为和影响因素。
2.
In this paper the author had introduced the development and situation of steelbonded hard alloy from the study of steel matrix,hard phase and procedure.
耐磨钢结材料由于其广泛的工艺特性和良好的综合物理机械性能及优异的化学稳定性而被应用于工业生产各个领域,本文从钢基体的研究、硬质相的种类及特点、工艺概述三方面介绍了其研究进展及现状。
6) 45 based steel
45钢基体
参考词条
不锈钢基底
钢基体材料
耐热钢基体
高速钢基体
不锈钢基片
不锈钢基板
304不锈钢基体
WC/钢基复合材料
碳化物/钢基合金
SiC/钢基复合材料
钢基复合材料
WCp/钢基复合材料
全钢基部胶料
边缘密封型式
XTR公钥密码系统
补充资料:复合夹芯管
分子式:
CAS号:
性质:管壁由内外实心层及中间发泡层构成的塑料管材,多用作建筑材料。优点为节约原材料,重量轻,运输、安装方便,发泡芯层的存在还可吸收流体(如水)输送过程中产生的噪声。通常是由PVC树脂经复合挤出加工方法制得。
CAS号:
性质:管壁由内外实心层及中间发泡层构成的塑料管材,多用作建筑材料。优点为节约原材料,重量轻,运输、安装方便,发泡芯层的存在还可吸收流体(如水)输送过程中产生的噪声。通常是由PVC树脂经复合挤出加工方法制得。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。