Cu-Sn,Cu-Sn,在线英语词典,英文翻译,专业英语

1) Cu-Sn

Cu-Sn

2) Cu-Sn alloy

铜锡合金

Electroplated Cu-Sn alloy coating is good in decoration and solderability,low in cost,non-toxic,not irritable,etc.

电镀铜锡合金具有装饰性好、可焊性优良、成本低、无毒、不使人体过敏等优点,而得到广泛的应用。

The method use SCR continuous casting-rolling system to make conducting wire(Cu-Sn alloy rod) for railway application was introduced.

介绍了采用SCR连铸连轧生产线生产高速电气化铁路接触网线用铜锡合金线坯的方法,用该法生产的产品,具有内部组织细小,均匀的晶粒,强度高,软化温度高,平直度好,耐摩性好,抗蠕变性好等特点。

The paper describes the process ofφ20mm Cu-Sn alloy wirebar production in continuous casting and roiling process,analyzes the impact of the wirebar s oxygen and tin content distribution on production stability, describes the cold-forming process of contact wire manufacturing by drawing machine,and studies and compares anti-drawing strength and extension capability of it.

介绍了采用连铸连轧工艺生产φ20mm铜锡合金线坯的过程,分析了线坯氧含量、锡含量对生产稳定性的影响。

3) Cu-Sn alloy

Cu-Sn合金

Rapid dendritic growth in melt-spun Cu-Sn alloys;

急冷条件下Cu-Sn合金的快速枝晶生长

Microstructural morphology and phase structure of rapidly solidified Cu-Sn alloy;

快速凝固Cu-Sn合金的组织形态及相结构

Preparation and improvement of Cu-Sn alloy negative electrode for lithium ion batteries;

锂离子蓄电池用Cu-Sn合金负极的制备及改性

4) Ag-Cu-In-Sn

Ag-Cu-In-Sn

Preparation and Thermal Property Analysis of Ag-Cu-In-Sn Nano-Powder;

纳米Ag-Cu-In-Sn合金粉末的制备及其热分析

5) Ni-Cu-Sn alloys

Ni-Cu-Sn合金

Ni-Cu-Sn alloys are formed by Laser Engineered Net Shaping (LENS) and no apparent deformation can be found in this study.

利用激光近净成形技术成形出无变形的Ni-Cu-Sn合金样品。

6) separation of Cu-Sn

铜锡分离

参考词条

补充资料：(-)-2,3-O-Isopropylidene-sn-glycerol

分子式：C₆H₁₂O₃
分子量：132.16
CAS号：14347-78-5

性质：密度1.062。沸点72-73°C (8 mmHg)。折射率1.433-1.435。闪点80°C。比旋光度-13.7° (neat)。水溶性miscible。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。

首页 \| 翻译 \| 影视 \| 论坛 \| 索引 Cu-Sn intermetallics

1) Cu-Sn Cu-Sn 2) Cu-Sn alloy 铜锡合金 1. Electroplated Cu-Sn alloy coating is good in decoration and solderability,low in cost,non-toxic,not irritable,etc. 电镀铜锡合金具有装饰性好、可焊性优良、成本低、无毒、不使人体过敏等优点,而得到广泛的应用。 2. The method use SCR continuous casting-rolling system to make conducting wire(Cu-Sn alloy rod) for railway application was introduced. 介绍了采用SCR连铸连轧生产线生产高速电气化铁路接触网线用铜锡合金线坯的方法,用该法生产的产品,具有内部组织细小,均匀的晶粒,强度高,软化温度高,平直度好,耐摩性好,抗蠕变性好等特点。 3. The paper describes the process ofφ20mm Cu-Sn alloy wirebar production in continuous casting and roiling process,analyzes the impact of the wirebar s oxygen and tin content distribution on production stability, describes the cold-forming process of contact wire manufacturing by drawing machine,and studies and compares anti-drawing strength and extension capability of it. 介绍了采用连铸连轧工艺生产φ20mm铜锡合金线坯的过程,分析了线坯氧含量、锡含量对生产稳定性的影响。 3) Cu-Sn alloy Cu-Sn合金 1. Rapid dendritic growth in melt-spun Cu-Sn alloys; 急冷条件下Cu-Sn合金的快速枝晶生长 2. Microstructural morphology and phase structure of rapidly solidified Cu-Sn alloy; 快速凝固Cu-Sn合金的组织形态及相结构 3. Preparation and improvement of Cu-Sn alloy negative electrode for lithium ion batteries; 锂离子蓄电池用Cu-Sn合金负极的制备及改性 4) Ag-Cu-In-Sn Ag-Cu-In-Sn 1. Preparation and Thermal Property Analysis of Ag-Cu-In-Sn Nano-Powder; 纳米Ag-Cu-In-Sn合金粉末的制备及其热分析 5) Ni-Cu-Sn alloys Ni-Cu-Sn合金 1. Ni-Cu-Sn alloys are formed by Laser Engineered Net Shaping (LENS) and no apparent deformation can be found in this study. 利用激光近净成形技术成形出无变形的Ni-Cu-Sn合金样品。 6) separation of Cu-Sn 铜锡分离参考词条 Ag-Cu-Sn-In alloy Ag-Cu-In-Sn nanoparticles Cu-Sn-P alloy Cu-Sn-P-CdCr_2S_4 Cu-Sn-P Cu-Sn alloy electroplating Cu-Sn sulphide Co-Cu-Sn ternary bright Cu-Sn alloy Cu-Sn-P-ZrO2 Cu-Sn contact wire Cu-Sn deposit Cu-Sn hypoperitectic alloy Ag-Cu-In-Sn alloy Cu/Sn system Cu-Sn-Zn alloy core-shell Cu-Sn nanoparticles Cu-Sn group ion sulfide Cu Sn P Film Surface 隙孔双中心交换积分补充资料：(-)-2,3-O-Isopropylidene-sn-glycerol 分子式：C₆H₁₂O₃ 分子量：132.16 CAS号：14347-78-5 性质：密度1.062。沸点72-73°C (8 mmHg)。折射率1.433-1.435。闪点80°C。比旋光度-13.7° (neat)。水溶性miscible。说明：补充资料仅用于学习参考，请勿用于其它任何用途。
©2008 dictall.com