1) boron steel
硼钢
1.
Effect of Titanium Content on Structure and Toughness of Low Carbon Boron Steel 0.20C-1.1Mn-0.1V-0.004B;
钛含量对0.20C-1.1Mn-0.1V-0.004B低碳硼钢组织和韧性的影响
2.
Summarize the technical conditions of delivery boron steel in European standard EN 10083-3(1996);
欧洲标准EN10083-3(1996)硼钢交货技术条件标准综述
3.
It proves that producing boron steel with pig iron containing boron is practicable.
对以含硼生铁为原料直接冶炼硼钢新工艺的关键问题进行了基础研究,为新工艺提供了理论依据。
2) boronated steel
硼化钢，硼钢
3) high boron cast steel
高硼铸钢
1.
Effect of quenching temperature on microstructure and hardness of high boron cast steel;
淬火温度对高硼铸钢显微组织和硬度的影响
2.
Structure and performance of high boron cast steel liner;
高硼铸钢衬板的组织和性能
3.
A high boron cast steel with high strength and wear-resistant is obtained by adding 1.
0%B,获得了高强度高硼耐磨铸钢,并研究了淬火温度对高硼铸钢显微组织和性能的影响。
4) high boron steel
高硼钢
1.
Simulating different solidification cooling rate with step-metal mould and sand mould,the effect of solidification cooling rate on microstructure and properties of high boron steel were studied.
利用阶梯型腔金属模和砂型模拟不同的冷却速度,研究了冷却速度对高硼钢凝固组织和性能的影响。
2.
5% B high boron steel under the non-vacuum and vacuum condition, the B content of the high boron steel was analyzed and the B recovery rate was calculated.
5%的高硼钢,并取样分析高硼钢中B含量、计算B回收率,讨论分析试验过程中影响B回收率的因素,结果表明,熔炼时加入Ti,Zr以及稀土能对稳定B回收率起到积极作用。
6) low carbon boron steel
低碳硼钢
1.
The effect of tiny amount of Titamium on the notch toughness of low carbon boron steel was investigated.
研究了微量钛对低碳硼钢冲击韧性的影响。
2.
The influences of B content and Nb,V micro-alloying on the impact toughness of low carbon boron steel were investigated by impact tests of low carbon boron steels with different boron contents and of Nb,V micro-alloyed low carbon boron steel.
通过对不同B含量的低碳硼钢和Nb、V微合金化低碳硼钢的冲击实验,研究了B含量及Nb、V微合金化对低碳硼钢冲击性能的影响。
补充资料：硼钢
| 硼钢 boron steel 以硼为主要合金化元素的钢。又称硼处理钢。能改善钢的某些性能。硼在钢中的作用主要是提高钢的淬透性，其次可提高耐热钢的高温强度，蠕变强度，改善高速钢的红硬性和刀具的切削能力。硼还有很强的中子吸收能力，故原子能用钢也常加入硼。硼的淬透性效果（淬火时淬硬层的深浅）与钢中的含硼量、含碳量及钢的奥氏体化温度有关。最佳含硼量约0.0010％ ，过低或过高均不能产生最佳效果。通常随着含碳量的增加，硼的作用降低。在最佳奥氏体化温度下，硼的淬透性效果最大。硼钢主要作为结构钢使用。此外，还可用作弹簧钢、低合金高强度钢、冷变形钢、耐磨钢、耐热钢、原子能用钢等。 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条