1.
The Effect of Zr、Cr、Ni on the Microstructure of High Boron Steel
Zr、Cr、Ni对高硼钢组织的影响
2.
Effect of Boron on Structures and Mechanical Properties of High Strength Spring Steels;
硼对高强度弹簧钢组织与性能的影响
3.
Study on the Hot Stamping Process of High Strength Steel Blanks;
汽车超高强度硼钢板热成形工艺研究
4.
Control on microstructure and mechanical properties of ML20MnTiB high strength cold-heading steel
含硼高强度冷镦钢ML20MnTiB组织性能控制
5.
Impact toughness in the welding heat affected zone of HSLA steel with boron
含硼低合金高强度钢焊接热影响区冲击韧度
6.
Effect of boron on microstructure and properties of high-strength low carbon bainitic steel
硼对高强度低碳贝氏体钢组织和性能的影响
7.
Magnetic and Electrical Properties of SI-ORIENT-CORE-HI-B-LS
晶粒取向电器用硅[硅]钢;片-高硼低硫定取向钢片之磁力及电力性能
8.
Mechanical Properties and Lamination Factors of SI-ORIENT-CORE-HI-B and SI-ORIENT-CORE Grain Orient Electrical Steel Sheets
晶粒取向电器用硅[硅]钢片-高硼定取向芯钢片及定取向芯钢片之机械性能及夹层系数
9.
An Investigation of the Conventional HSS Cutting Performance by SOCNB Complex Permeation Treatment Method
硫氧碳氮硼复合共渗高速钢刀具切削性能的研究
10.
Effect of Cooling After Rolling on Microstructure and Properties of Ultra High Strength Steel with Boron
轧后冷却对汽车用含硼超高强度钢组织和性能的影响
11.
A Study on Delayed Fracture Resistance of Low Carbon Nb-V Microalloying High Strength Cold Heading Boron Steel
低碳Nb-V微合金化高强度冷镦硼钢耐延迟断裂性的研究
12.
Effect of water toughening temperature on microstructure and properties of super-high manganese steel with trace boron
水韧处理温度对含硼超高锰钢组织和性能的影响
13.
Boronizing of ZG1Cr18Ni9 austenite stainless steel
ZG1Cr18Ni9奥氏体不锈钢的渗硼
14.
Magnetic Properties and Lamination Factor of SI-ORIENT-CORE& SI-ORIENT-CORE-HI B Electrical Steel Strip (JIS and AISI Standard)
晶粒取向，定取向芯钢片及高硼定取向芯钢片之磁力性能及夹层系数(日工标准及美材标准)
15.
Mechanical Properties and Lamination Factors of SI-ORIENT-CORE-HI-B-LS
晶粒取向电器用硅[硅]钢片-高硼低硫定取向钢片之机械性能及夹层系数
16.
Laser Remelting on Surfaces of 20 Steel and 5CrNiMo Steel after Boronization;
20钢和5CrNiMo钢表面渗硼后的激光重熔
17.
Research on the Production and Properties of Boron Steel Produced by Using Pig Iron Containing Boron as Alloying Agent
以含硼生铁为添加剂的硼钢的制备和性能研究
18.
STUDY ON CUT-PRESS BLADE OF BORONIZING 45 STEEL FOR MOSAIC
45~#钢渗硼马赛克切压刀片的试验研究