1) coaxial plasma-MIG welding
同轴式等离子-MIG焊接
2) plasma-MIG welding
等离子-MIG焊接
1.
Design and development of plasma-MIG welding equipment;
等离子-MIG焊接设备的设计与研制
2.
The plasma-MIG welding is a double arc welding technique, which is very suitable for the welding of thick-walled aluminum and aluminum alloy structures.
等离子-MIG焊接是一种双电弧高效焊接方法,特别适合于厚壁铝及铝合金构件的焊接。
3.
In the plasma-MIG welding metal transfer process.
为了分析等离子-MIG焊熔滴过渡过程中等离子弧和MIG弧对熔滴过渡形态的影响,利用示波器研究了等离子-MIG焊接铝合金时不同熔滴过渡形式的特征,包括电弧电压波形的变化及熔滴过渡临界电流的研究。
3) PLASMA-MIG welding
等离子MIG焊
1.
Normative optimization and tissue analysis of Al-alloy of PLASMA-MIG welding;
等离子MIG焊接铝合金的规范优化及组织分析
2.
Plasma-MIG welding is a kind of advanced welding method, which uses plasma-arc and MIG-arc burning in the same blowtorch, so that weld-penetration and melting-width are properly distributed, and it can get high welding quality and efficency.
等离子MIG焊是利用等离子电弧和MIG电弧在同一个焊枪中燃烧,以获得焊缝熔深和熔宽合理分配,并且具有高的焊接质量和焊接效率的一种先进的焊接方法。
4) Plasma welding
等离子焊接
1.
Keyhole detection by arc voltage signal processing during plasma welding;
等离子焊接小孔效应的电弧电压信号检测
2.
It is described the advantage of plasma welding principle and welding process and analyzed the properties of key component among plasma welding system.
论述了等离子焊接原理和焊接工艺的优点;分析了等离子焊接系统中重要组成部分的性能;介绍了等离子焊接系统在不锈钢焊管生产中的一些焊接工艺参数以及实际应用的效果。
3.
To explore the proper sensing techniques which should be able to tell the size of the keyhole in real time during the plasma welding processes,the signals of arc voltage and current under the conditions of different keyhole sizes were sampled into the computer,and processed to find characteristics related to keyhole size using`FFT'and`STFT'techniques on the signals.
为了开发可行的实时检测等离子焊接过程中熔池小孔尺寸的传感技术 ,采集了对应于不同熔池小孔尺寸的电弧电压和电弧电流信号存入计算机 ,采用快速傅里叶变换 (FFT)和短时Fourier变换对电弧信号进行了分析 ,发现位于频率区间f=2 。
5) MIG welding
MIG焊接
1.
Study on MIG welding process of medium thickness 7A05 aluminum alloy
中厚度7A05铝合金MIG焊接工艺研究
2.
In the paper, MIG welding input is approximately treated as 3-dimensional heat sources along three axes.
建立了工件任意一移动点热源作用下温度场的瞬态模型,将MIG焊接热输入近似处理为沿3个坐标轴的三维串热源。
3.
The filling wire TIG and MIG welding tests were carried out on the thickness of 8.
试验结果表明,填丝TIG焊缝成形良好;MIG焊接时有飞溅现象,焊缝成形不及TIG均匀。
6) metal inert-gas welded joints
MIG焊接头
补充资料：同休等戚
1.见"同休共戚"。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条