1) arc sensor
电弧传感器
1.
Signal processing and communication of arc sensor based on DSP;
基于DSP的电弧传感器信号处理与通信
2.
Design of arc sensor based on rule self-adaptive fuzzy controller;
规则自适应模糊控制电弧传感器设计
3.
Development of arc sensor for short circuit transition;
一种短路过渡电弧传感器的研制
2) rotating arc welding sensor
旋转电弧传感器
1.
The high speed rotating arc welding sensor driven by motor with air axis is widely used in seam tracking system,the theory of variation detection is introduced at first;the minimization of controller is necessary in putting the technology into products,the work has been done.
空心轴高速旋转电弧传感器广泛应用于焊缝跟踪系统中,首先介绍了利用这种传感器进行焊缝偏差检测的原理,在已有的基于工控机来控制平台的基础上,对控制器进行了小型化工作,从工作原理、软硬件组成和相应的功能模块的实现等方面介绍了基于十六位单片机80C196KC的控制系统的开发方法,结论中还提到了开发时的一些技巧和体会,利用所研制的控制器在焊接机器人ROMAT 76AW上进行了采集和控制实验,结果证明基本达到预定要求。
3) rotating arc sensor
旋转电弧传感器
1.
Identification of welding torch deviation with rotating arc sensor;
旋转电弧传感器焊枪偏差信息识别方法
2.
Processing of underwater arc welding signal based on rotating arc sensor
基于旋转电弧传感器的水下电弧焊信号处理
4) magnetic-control arc sensor
磁控电弧传感器
1.
In order to solve the problem of the mechanical arc sensor for seam-tracking,a new type of magnetic-control arc sensor was developed,and its mechanical structure and the correlative circuit diagram were given.
为了解决目前机械式电弧传感器用于焊缝跟踪中存在的问题,设计了一种磁控电弧传感器,给出了它的机械结构和电路原理图,该传感器应用磁场控制电弧技术,具有结构简单、无机械振动、成本低、控制精确等优点,有很高的实用价值。
2.
Aimed at some problems of the mechanical arc sensor for seam-tracking,the magnetic-control welding arc technology is applied to seam tracleking,a new type magnetic-control arc sensor and a system structure with two sets of crossed slides are designed.
针对目前机械式电弧传感器普遍存在的问题,将磁场控制电弧技术应用于焊缝跟踪,设计了磁控电弧传感器和一种双十字滑块的结构系统,对采样信号采用了RCπ型滤波和巴特沃思滤波器进行双级滤波,提出了有限区间去极值离散积分比较法来提取实际焊缝坡口的偏差信息。
3.
In order to solve some problems of the sensor for seam-tracking,applied the magnetic-control welding arc technology,developed a new type magnetic-control arc sensor,it s basic principle was analyzed,and mathematic model was built,the main parameters were analyzed,that provided academic foundation for the application of the magnetic-control arc sensor.
为了解决目前焊缝跟踪传感器存在的一些问题,将磁场控制电弧技术应用于焊缝跟踪,设计了一种磁控电弧传感器,分析了其基本原理,并建立了相关的数学模型,对主要参数进行了分析,为磁控电弧传感器的应用提供了理论依据。
5) arc sensor system
电弧传感器系统
1.
The paper describes a mathematical model of arc sensor system (ASS) for MIG welding system based on the theoretical analysis and experiment tests.
通过理论分析和实验研究初步建立了MIG焊电弧传感器系统的数学模型,从而为定量分析系统的最佳工作状态、提高控制精度提供了一定的理论基础。
6) rotational arc sensor
旋转电弧传感器
1.
Improvement of characteristic harmonic method in rotational arc sensor
旋转电弧传感器特征谐波法的改进
2.
Identification of welding torch attitude based on rotational arc sensor
旋转电弧传感器焊枪空间姿态识别
3.
An experimental system for underwater welding identification of welding torch offset based on high speed rotational arc sensor was established.
搭建了基于高速旋转电弧传感器的水下焊接焊枪偏差识别的实验系统。
补充资料：50t炼钢电弧炉电抗器、电阻器(SVC)(大冶钢厂)
50t炼钢电弧炉电抗器、电阻器(SVC)(大冶钢厂)
50t炼钢电弧炉电抗器、电阻器(SVC)(大冶钢厂)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条