1) chemical liquid-vaporized infiltration
化学液气相沉积
1.
Study on chemical liquid-vaporized infiltration process for preparing carbon/carbon composites;
炭/炭复合材料化学液气相沉积致密化技术研究
2.
Carbon/carbon composites were prepared by chemical liquid-vaporized infiltration process with kerosene as the precursors and the needled carbon fiber felt with a density of 0.
利用化学液气相沉积工艺以煤油为前驱体,采用密度为0。
3.
It was illuminated the principle and advantage of chemical liquid-vaporized infiltration technology for preparation of carbon/carbon composites.
化学液气相沉积技术是目前最快的C/C复合材料的制备工艺,它的致密化速度是传统等温化学气相沉积工艺的100倍。
2) CLVD
化学液气相沉积
1.
By studying the densification process of the same height, different diameter and the same diameter , different height preforms, we examined the effects of preform geometry on radio frequency assisted chemical liquid vapor deposition(CLVD) of carbon preforms.
考察了预制体几何形状在高频辅助化学液气相沉积 (CLVD)工艺中的作用。
3) chemical liquid-vaporized infiltration
化学液相气化沉积
1.
Study on microstructure uniformity of carbon/carbon composites prepared by chemical liquid-vaporized infiltration;
化学液相气化沉积制备的炭/炭复合材料组织均匀性研究
2.
67 g/cm~3 were fabricated by chemical liquid-vaporized infiltration with and without catalyst at 1000℃for 10 h and 900℃for 8 h,respectively.
在不加和加入催化剂的条件下,采用化学液相气化沉积工艺分别在1000℃-10 h及900℃- 8 h内制备出密度为1。
4) Chemical liquid-vaporized deposition
化学液气相沉积法
5) chemical liquid deposition
化学液相沉积法
1.
The Cu/CuPc composite particle was prepared with the method of chemical liquid deposition and the affect of dif.
采用化学液相沉积法制备了Cu／CuPc复合粒子，研究了不同的制备条件对复合粒子的影响。
6) chemical liquid-phase deposition
化学液相沉积
1.
Silicon-modified Hβ zeolites were prepared by chemical liquid-phase deposition of silicon oil.
采用化学液相沉积法对Hβ沸石进行硅改性,并对其催化萘异丙基化反应的性能进行了评价,考察了硅油类型、沉积量和沉积时间对硅改性Hβ沸石催化性能的影响;采用BET、X射线衍射、吡啶吸附-红外光谱和氨吸附-程序升温脱附等方法对Hβ沸石的晶相、孔结构和酸性进行了表征。
补充资料：等离子化学气相沉积
分子式：
CAS号：
性质：PCVD 化学气相沉积(CVD)法是制备无机材料，尤其是无机薄膜和涂层的一种重要手段。用等离子辅助CVD，可在较低的温度下沉积，涂层均匀不剥落。
CAS号：
性质：PCVD 化学气相沉积(CVD)法是制备无机材料，尤其是无机薄膜和涂层的一种重要手段。用等离子辅助CVD，可在较低的温度下沉积，涂层均匀不剥落。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条