说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 环氧胶接接头
1)  epoxy bonded joint
环氧胶接接头
1.
Study on the aging performance of epoxy bonded joint in water;
环氧胶接接头在水中的老化行为研究
2.
Study on the aging performance of epoxy bonded joint in acid media;
环氧胶接接头在酸介质中的老化行为研究
3.
The results show that both of PAA and SHA can enhance durability of Al/Al and Ti/Ti epoxy bonded joint in media in comparison with sand paper polishing.
选用了LY12CZ铝合金和TA2钛合金两种基体,分别采用了两种不同的表面处理方法对其进行表面处理:砂纸打磨、磷酸阳极化(PAA)和砂纸打磨、阳极化(SHA);研究了不同表面处理方法对Al/Al环氧胶接接头、Ti/Ti环氧胶接接头老化性能的影响,结果表明,与砂纸打磨法相比PAA和SHA表面处理法能显著提高环氧胶接接头在介质中的老化性能,尤其是在低温介质中的耐久性。
2)  adhesively bonded joint
胶接接头
1.
Fracture of adhesively bonded joints and discussion of relative fracture criterions;
胶接接头断裂及相关断裂准则探讨
2.
Effect of curing procedure on the impact toughness of adhesively bonded joints
固化工艺对胶接接头冲击性能的影响
3.
Bonding is a technological procedure that joins the surfaces of the adherends to form a adhesively bonded joint subjected to external load.
胶接是用胶粘剂将被粘物表面连接在一起,形成可承受外载的胶接接头的过程,是涉及材料粘附、高分子材料老化机理、表面技术、力学性能测试等多个学科领域的边缘学科。
3)  adhesive bonded joints
胶接接头
1.
Influence of elastic modulus and thickness of adhesive on stress distribution of adhesive bonded joints under cleavage loading;
胶粘剂特性和厚度对劈裂载荷作用下胶接接头应力分布的影响
4)  adhesively-bonded joints
胶接接头
1.
Nondestructive testing of adhesively-bonded joints with acoustic technique;
胶接接头的声技术无损检测
5)  adhesive joint
胶接接头
1.
The mechanical properties of the adhesive joints by different treatment methods were investigated and the effect of surface treatment on the fatigue performance of the adhesive/metal interface was analyzed.
研究了不同表面处理的胶接接头力学性能,分析了金属表面处理方法对胶粘剂/金属界面疲劳性能的影响。
2.
The results showed that reasonable distribution of adhesive can to great extent decrease the adhesive amount used and make the shear stress distribution in adhesive layer become more even without prejudicing the total mechanical property of adhesive joints evidently.
利用有限元法,对单搭接胶接接头胶层进行拓扑优化,寻求胶粘剂最佳分配。
3.
The mechanical performance of the adhesive joint by silane treatment was investigated,and the influence of surface treatment on the mechanical performance of adhesive/metal interface was analyzed.
研究了硅烷处理的胶接接头的力学性能,分析了硅烷处理对涂层/金属界面力学性能的影响。
6)  epoxy splicer
环氧树脂接头机
补充资料:1,4-双[(2,3-环氧丙氧基)甲基]环氧乙烷
CAS: 14228-73-0
分子式: C14H24O4
中文名称: 2,2'-[1,4-环己二基双(亚甲基氧亚甲基)]双-环氧乙烷;1,4-双[(2,3-环氧丙氧基)甲基]环氧乙烷;1,4-双[(缩水甘油氧)甲基]环己烷

英文名称: 2,2'-[1,4-cyclohexanediylbis(methylene oxymethylene)] bis-Oxirane
1,4-bis[(2,3-Epoxypropoxy)ethyl]cyclohexane
2,2'-[1,4-cyclohexanediylbis(methyleneoxymethylene)]bis-oxiran
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条