1) porogen
致孔剂
1.
The internal structure of the resin beads can be controlled by parameters in the polymerization recipe such as mole fraction of cross-linker as well as the type and volume of diluent/ porogen/ pore generating solvent, an inert organic solvent,.
交联剂和致孔剂是影响树脂合成的关键因素,通过改变它们的种类和比例可以得到不同孔结构的吸附树脂。
2.
For the purpose of three-dimensional scaffolds fabrication with completely interconnected spherical pores for tissue engineering application, a novel water dissoluble spherical porogen was studied in this paper.
为了制备孔隙呈球形、孔隙间相互连通的高孔隙率三维细胞支架,研究了一种新型水溶性球形致孔剂及性质。
3.
Gelatin or NaCl particles were employed as porogen to fabricate biodegradable poly(L-lactide) (PLLA) scaffolds by a porogen-leaching technique.
采用明胶和氯化钠颗粒作为致孔剂,使用溶剂浇铸/颗粒沥滤法制备了高孔隙率、孔间连通和高机械性能的聚乳酸支架, 采用软骨细胞体外培养研究了这两种多孔支架对细胞生长性能的影响。
2) porogenic agent
致孔剂
1.
Study the result enunciation,be to lead into the porogenic agent in the system with the result that the bore,after melting agent extract absorb the oil resin to have the better oil article absorption rate,further certificate absorb the oil rate to the internal bore of resin the dependence of the structure.
研究结果表明,当体系中引入致孔剂,溶剂萃取后的吸油树脂有着更好的油品吸收率,进一步证明了吸油率对树脂内部孔结构的依赖性。
2.
The results showed that oil-absorption resin had better oil absorption rate after melting agent extraction when adding melting porogenic agent,which approved the dependent of oil-absorption resin to pole structure of resin.
研究结果表明,当体系中引入混合致孔剂,溶剂萃取后的吸油树脂有着更好的油品吸收率,进一步证明了吸油率对树脂内部孔结构的依赖性。
3.
Due to general oil-absorption resins didn\'t display satisfactory absorption of long carbon-chain oil, inert porogenic agent was introduced into suspension polymerization system, which was expected to enlarge pore structure inside resin and enhance hydrophobic force of resin respectively.
为了能够对长碳链油品没有表现出较好的吸油率,因此本文在常规吸油树脂的聚合体系中引入致孔剂,以期增大树脂孔结构以及树脂与长碳链油品的亲和性。
3) pore-forming agent
致孔剂
1.
The influences of coating condition and the content of pore-forming agent on the porous structure and the vapor permeation were studied.
研究了湿法涂层技术制备聚氨酯 (PU )多孔膜的工艺条件以及致孔剂含量对多孔膜微孔结构和透湿性能的影响。
2.
OBJECTIVE To compare the influence of different pore-forming agents and their amount on the release of budesonide enteric-coated sustained-release pellets.
目的比较不同致孔剂及其用量对水难溶性药物布地奈德肠溶缓释微丸释药行为的影响。
3.
Gels with rapid response rate can be synthesized by using pore-forming agent.
致孔剂法可以制备快速响应的温敏凝胶;冷冻法可以制备快速响应或高强度的凝胶。
4) porogenic agents
致孔剂
1.
Compared with conventional preparation,adding porogenic agents at the course of synthesis can enhance the adsorption ability of resin toward protein,while the mechanical strength is rather low.
与传统方法相比 ,合成时加入致孔剂可提高树脂对蛋白质的吸附能力 ,但树脂的机械强度差 ;改用环氧氯丙烷为交联剂可得机械性能较好的高孔隙率树脂 ,此类树脂对铜离子及蛋白质均有较高的吸附能力 。
5) micropore porosifer
微孔致孔剂
1.
The effect of the micropore porosifer on the formation of the bone-like apatite in carbonate-contained HA/β-TCP ceramics prepared by the new technique was discussed in detail for the first time.
本文利用体外模拟装置首次研究了微孔致孔剂对新工艺制备的含CO32-的双相HA/β-TCP多孔陶瓷表面类骨磷灰石形成的影响。
6) silicon oil porogens
硅油致孔剂
补充资料：奉送孔十兄宾客承恩致政归东都旧居
【诗文】：
达人旷迹通出处，每忆安居旧山去。乞身已见抗疏频，
优礼新闻诏书许。家法遥传阙里训，心源早逐嵩丘侣。
南史编年著盛名，东朝侍讲常虚伫。角巾华发忽自遂，
命服金龟君更与。白云出岫暂逶迤，鸿鹄入冥无处所。
归路依依童稚乐，都门蔼蔼壶觞举。能将此道助皇风，
自可殊途并伊吕。
【注释】：
【出处】：
全唐诗：卷323-2
达人旷迹通出处，每忆安居旧山去。乞身已见抗疏频，
优礼新闻诏书许。家法遥传阙里训，心源早逐嵩丘侣。
南史编年著盛名，东朝侍讲常虚伫。角巾华发忽自遂，
命服金龟君更与。白云出岫暂逶迤，鸿鹄入冥无处所。
归路依依童稚乐，都门蔼蔼壶觞举。能将此道助皇风，
自可殊途并伊吕。
【注释】：
【出处】：
全唐诗：卷323-2
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条