1) electroporation
电致孔
1.
Entrapment of cyclosporin A in rat skin during topical delivery by combination with chemical enhancers pretreatment and electroporation;
化学促渗剂预处理与电致孔联用促进大鼠皮肤滞留环孢素A
2.
Investigation into the potential of electroporation facilitated entrapment of cyclosporin A in skin;
用电致孔法促进环孢素A的皮肤滞留
3.
Effect of various penetration enhancers on transdermal absorption of sinomenine by electroporation;
电致孔条件下不同促渗剂对青藤碱透皮吸收的影响
2) micropore porosifer
微孔致孔剂
1.
The effect of the micropore porosifer on the formation of the bone-like apatite in carbonate-contained HA/β-TCP ceramics prepared by the new technique was discussed in detail for the first time.
本文利用体外模拟装置首次研究了微孔致孔剂对新工艺制备的含CO32-的双相HA/β-TCP多孔陶瓷表面类骨磷灰石形成的影响。
3) foaming method
致孔法
1.
Preparation of CMCTS-g-PAA macroporous superabsorbent polymer by foaming method;
致孔法制备新型CMCTS-g-PAA大孔高吸水树脂
4) porogenic agent
致孔剂
1.
Study the result enunciation,be to lead into the porogenic agent in the system with the result that the bore,after melting agent extract absorb the oil resin to have the better oil article absorption rate,further certificate absorb the oil rate to the internal bore of resin the dependence of the structure.
研究结果表明,当体系中引入致孔剂,溶剂萃取后的吸油树脂有着更好的油品吸收率,进一步证明了吸油率对树脂内部孔结构的依赖性。
2.
The results showed that oil-absorption resin had better oil absorption rate after melting agent extraction when adding melting porogenic agent,which approved the dependent of oil-absorption resin to pole structure of resin.
研究结果表明,当体系中引入混合致孔剂,溶剂萃取后的吸油树脂有着更好的油品吸收率,进一步证明了吸油率对树脂内部孔结构的依赖性。
3.
Due to general oil-absorption resins didn\'t display satisfactory absorption of long carbon-chain oil, inert porogenic agent was introduced into suspension polymerization system, which was expected to enlarge pore structure inside resin and enhance hydrophobic force of resin respectively.
为了能够对长碳链油品没有表现出较好的吸油率,因此本文在常规吸油树脂的聚合体系中引入致孔剂,以期增大树脂孔结构以及树脂与长碳链油品的亲和性。
5) pore-forming mechanism
致孔机理
1.
The pore-forming mechanism of PEG was analysed.
首次通过激光光散射研究了致孔剂聚乙二醇(PEG)在反应介质中的聚集状态,分析了PEG的致孔机理。
6) porogen
致孔剂
1.
The internal structure of the resin beads can be controlled by parameters in the polymerization recipe such as mole fraction of cross-linker as well as the type and volume of diluent/ porogen/ pore generating solvent, an inert organic solvent,.
交联剂和致孔剂是影响树脂合成的关键因素,通过改变它们的种类和比例可以得到不同孔结构的吸附树脂。
2.
For the purpose of three-dimensional scaffolds fabrication with completely interconnected spherical pores for tissue engineering application, a novel water dissoluble spherical porogen was studied in this paper.
为了制备孔隙呈球形、孔隙间相互连通的高孔隙率三维细胞支架,研究了一种新型水溶性球形致孔剂及性质。
3.
Gelatin or NaCl particles were employed as porogen to fabricate biodegradable poly(L-lactide) (PLLA) scaffolds by a porogen-leaching technique.
采用明胶和氯化钠颗粒作为致孔剂,使用溶剂浇铸/颗粒沥滤法制备了高孔隙率、孔间连通和高机械性能的聚乳酸支架, 采用软骨细胞体外培养研究了这两种多孔支架对细胞生长性能的影响。
补充资料：电致发光显示材料(见电致发光材料)
电致发光显示材料(见电致发光材料)
electroluminescent display materials
蒸敷棘巍 diSPlay 又称场致 质的粉末
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条