1) electrolytic aluminum liquid
电解铝液
1.
The process of producing aluminum slab directly with electrolytic aluminum liquid was discussed The economic benefits obtained from the process was evaluate
探讨了用电解铝液直接生产铝合金扁锭的工艺技术以及由此产生的经济效
2.
The characteristics of electrolytic aluminum liquid are high temperature,high inclusion and gas contents.
电解铝液温度高、夹杂物多、气体含量高。
3.
If electric round aluminum rod is produced by electrolytic aluminum liquid directly,the purity of aluminum liquid could be improved and guaranteed by furnace refining,on-line degassing,filtrate,decrease secondary pollution and etc.
直接用电解铝液生产电工圆铝杆可通过炉内精炼、在线除气、过滤、减少二次污染等提高和保证铝液洁净度;通过电磁搅拌提高铝液化学成分和温度均匀性;通过添加20%～40%固体料改善内部组织生产出高质量的产品。
2) electrolysis aluminum liquid
电解铝液
1.
Aluminum foil stock can be directly cast-rolled by electrolysis aluminum liquid.
使用电解铝液直接铸轧生产铝箔坯料,减少了二次熔化,缩短了生产工艺流程,节约了生产成本。
2.
The main defects of aluminum substrate for PS plate produced by direct cast-rolling of electrolysis aluminum liquid were discussed, and the reason for the defects was analyzed.
研究了电解铝液直接铸轧生产PS版铝板基的主要缺陷,并分析了缺陷产生的原因。
3) electrolytic aluminum melt
电解铝液
1.
Melt purification in the course of producing aluminum alloy slab by using electrolytic aluminum melt
用电解铝液生产铝合金扁铸锭的熔体净化工艺
2.
The casting equipment of electromagnetic field stocks of electrolytic aluminum melt with an excitation mechanism, which forms a strong magnetic field in operation, is an innovative project.
电解铝液电磁场坯铸轧装备是一项创新项目,在常规铸轧装备的基础上创新地加上了励磁机构,运作中形成了强磁场,在铸轧过程中,板带材形成新的组织,使得机械性能显著提高。
4) electrolytic aluminium melt
电解铝液
1.
The characteristic of electrolytic aluminium melt was introduced.
介绍了电解铝液的特点,分析了用电解铝液直接铸轧铝箔坯料的工艺过程。
2.
Discuss the key technic of casting the stock of the cathode foil with electrolytic aluminium melt, and effect of the cold rolling process on cathode foil quality.
讨论了电解铝液直接铸轧负极箔毛料的关键技术,以及冷轧等工艺对负极箔质量的影响,简述了电解铝液制 造负极箔的基本原理。
3.
The characteristic of electrolytic aluminium melt was introduced.
介绍了电解铝厂电解铝液的特性,分析了用电解铝液直接生产铝材坯料的工艺技术以及与铝锭重熔法相比的经济效益。
5) electrolytic aluminium liquid
电解铝液
1.
According to both the intrinsic characteristics of electrolytic aluminium liquid and quality requirements of electrical rod GB 3954-83, determination of the various chemical composition; refining of aluminium liquid and seeking optimum technology parameters of both continuous casting and rolling are discussed.
根据电解铝液的固有特点和ＧＢ３９５４－８３电工圆铝杆的质量要求，简要地从化学成分确定、铝液的净化精炼、连铸连轧工艺参数的优化选择等各个方面进行了分析探讨，特别对电工圆铝杆的分等级生产以及提高产品合格率等方面有一定指导意义。
2.
Key technique of casting aluminium strip with electrolytic aluminium liquid is summa-rized.
概述了直接利用电解铝液生产铝带卷的关键技术，并对熔炼、铸轧工艺参数的选择，质量的控制进行了全面的分析。
6) electrolytic aluminum liquid
电解原铝液
1.
Investigation on production of high quality 6063 aluminum alloy rounded ingot from electrolytic aluminum liquid
用电解原铝液生产高精6063铝合金圆铸锭的工艺研究
补充资料：铝电解厂16kV·A电解槽系列及电解多功能机组
铝电解厂16kV·A电解槽系列及电解多功能机组
铝电解厂16kV·A电解槽系列及电解多功能机组
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条