1) Al-base alloy electrolysis liquid with low Ti content
电解低钛铝基合金液
2) electrolytic low-titanium aluminum base alloy
电解低钛铝基合金
1.
In order to study the effects of element titanium and different titanium alloying methods on the fatigue properties and fracture toughness of alloy ZL108 systematically, the electrolytic low titanium alloying ZL108 (referred as ZL108D) and the low titanium alloying ZL108 by melting (refer as ZL108R) are made from electrolytic low-titanium aluminum base alloy and Al-Ti maste.
为系统地研究加钛和不同的加钛方式对ZL108合金疲劳性能和断裂韧性的影响，以电解低钛铝基合金和A1-Ti中间合金为原材料，采用相同的试验条件，分别制备ZL108合金、电解加钛ZL108合金(记作ZL108D)和熔配加钛ZL108合金(记作ZL108R)，在MTS810型材料试验机上进行对比试验。
2.
One is the normal alloy ZL108 containing no titanium; the second is produced with the electrolytic low-titanium aluminum base alloy (referred as ZL108D); the third is produced with pure aluminum and Al-Ti master alloy (referred as ZL108R).
为系统地研究加钛和不同的加钛方式对ZL108合金力学及磨损性能的影响，以电解低钛铝基合金和Al-5。
3) electrolytic low-titanium aluminum alloy
电解低钛铝合金
1.
Results showed that the mechanical properties of the electrolytic low-titanium aluminum alloy was superior to that of the fused alumi.
在电解低钛铝合金中,球形Mg2Si分布更为弥散、均匀。
2.
The 6063 alloys are made with electrolytic low-titanium aluminum alloys.
用电解低钛铝合金熔配6063合金,挤压成型材后,研究其微观组织与力学性能,并与国内6063型材的微观组织与力学性能做了对比。
3.
The grain refinement effect and fading behaviors of titanium added to commercial pure aluminum by electrolysis and by Al-Ti and Al-Ti-B master alloy, and added to electrolytic low-titanium aluminum alloys by Al-B master alloy were investigated through comparing experiment.
通过对比实验,研究了电解加钛与经Al Ti、Al Ti B中间合金向工业纯铝熔配加钛的晶粒细化效果及其衰退行为,以及Al B中间合金对电解低钛铝合金的晶粒细化效果及衰退行为的影响,还分析了硼对电解低钛铝合金的晶粒细化和抗衰退行为的影响。
4) electrolytic low-titanium aluminium alloy
电解低钛铝合金
1.
The microstructure and mechanical properties of alloy ZL108 and ZL108Ti produced by the pure aluminium ingot and the electrolytic low-titanium aluminium alloy ingot respectively were studied.
研究了用纯铝锭和电解低钛铝合金锭来熔配生产ZL108Ti合金的组织及性能。
5) directly electrolytic producing low-titanium aluminum alloy
电解生产低钛铝合金
6) electrolysis Al-Ti alloy
电解钛铝合金
补充资料：熔盐电解法生产铝基母合金
熔盐电解法生产铝基母合金
production of aluminium master alloy by molten salt electrolysis
rongyon dlanJ一efo shengchan IUj一muheJin熔盐电解法生产铝基母合金(produetion ofa luminlum master alloy by molten salt elee-trolysis)把直流电流通入溶有氧化铝和合金元素化合物的熔盐电解质中，在电解槽阴极上析出铝基母合金的过程。为铝基母合金生产方法之一。铝基母合金的传统生产方法是使铝和合金元素在炉内于高温下熔合而成。传统法的优点是合金质量容易控制，缺点是金属损失量大，生产成本高。熔盐电解法是把合金元素的氧化物或卤化物与氧化铝一起加入电解槽电解，在阴极上直接析出所需要的铝基母合金。熔盐电解法的优点是不必直接使用合金元素，合金质量均匀，生产可连续进行，生产规模大、成本低。工业上已实现了电解法生产铝硅母合金，电解法生产铝铁母合金，电解法生产铝锰合金和电解法生产铝确母合金和电解法生产铝稀土母合金。 (邱竹’贤徐树田)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条