1) stranded wire helical spring
多股螺旋弹簧
1.
Having considered the main characteristics of stranded wire helical spring machining tool,a novel NC system is proposed to control the precise forming process.
针对多股螺旋弹簧加工的主要特点,采用数控系统进行精密加工成型控制。
2.
The geometric equations were put forward on a single-wire in the stranded wire helical springs based on the winding relationship between the center curve of the wire and of the springs,the differential equations of curvature and torsion etc.
根据多股螺旋弹簧钢丝中心曲线和弹簧中心曲线的缠绕关系,建立了基于微分几何学的单股钢丝中心曲线的几何方程,并推导了曲线方程曲率和挠率等参数的表达式。
2) stranded wires helical spring
多股螺旋弹簧
1.
Based on the forming principle of stranded wires helical spring and the current problems in the manufacturing process,a new design scheme for the number control machine is put forward.
针对多股螺旋弹簧成型原理,及成型过程中存在的问题,提出多股簧数控机床新型的设计方案。
3) multi-wire helical compression spring
多股螺旋压缩弹簧
1.
Forces applied to the multi-wire helical compression spring with multi-centre-wires are analyzed,and its axial deflection formulae are derived taking into cons-ideration the effect of contact pressure between the wires.
对具有多中心股的多股螺旋压缩弹簧在考虑各股簧丝之间接触压力影响的情况下，讨论了弹簧的受力分析，推导出这种弹簧的轴向变形公式。
4) coil spring
螺旋弹簧
1.
Stiffness calculation of coil spring used in locomotive and rolling stock;
机车车辆中螺旋弹簧刚度计算
2.
Non-conservative fussy reliability design of automobile coil spring
汽车螺旋弹簧的非保守模糊可靠度设计
3.
This article take the coil spring as the object of study,proposed structural style,the material,the level of stress and the fabrication technology of coil spring,which should be meet to prolong the coil spring fatigue life and improve smoothnees of the vehicle.
螺旋弹簧是高机动越野汽车悬架系统中的关键零件。
5) spiral spring
螺旋弹簧
1.
Discussion once again on the improvement method of cylindrical spiral spring design;
再谈圆柱螺旋弹簧设计方法的改进
2.
The optimal design system on CAD of spiral spring;
螺旋弹簧的计算机辅助优化设计系统
3.
Calculating rolling stock spiral spring's stiffness by method of amending spring working height
采用修正工作高度的方法计算铁道机车车辆螺旋弹簧刚度
6) Helical spring
螺旋弹簧
1.
Nonlinear theory of conical helical spring;
圆锥螺旋弹簧的非线性理论研究
2.
The reliability multi-target optimization design of helical spring;
螺旋弹簧可靠性多目标优化设计
3.
The paper is first contributed to discussing the method calculating the internal natural frequencies of helical springs.
本文首先讨论丁单螺旋弹簧局部振动的固有频率的计算方法,在此基础上进一步建立了串联、并联弹簧局部振动的分析模型,并探讨了弹簧局部振动频率的控制方法。
补充资料：螺旋弹簧
用弹簧钢丝绕制成的螺旋状弹簧。螺旋弹簧类型较多,按外型可分为普通圆柱螺旋弹簧和变径螺旋弹簧(见图);按螺旋线方向可分为左旋弹簧和右旋弹簧。圆柱形螺旋弹簧结构简单，制造方便，应用最广，其特性线为直线，可作压缩弹簧、拉伸弹簧和扭转弹簧。当载荷大而径向尺寸又有限制时，可将两个直径不同的压缩弹簧套在一起使用，成为组合弹簧。变径螺旋弹簧有圆锥螺旋弹簧、蜗卷螺旋弹簧和中凹形螺旋弹簧等。圆锥螺旋弹簧的缓冲性能较好，能承受较大载荷。蜗卷螺旋弹簧能储存较多能量和承受较大载荷，但制造工艺较为复杂。中凹形螺旋弹簧的性能与圆锥螺旋弹簧相似，多用于坐垫和床垫等。弹簧钢丝的载面有圆形和矩形等，以圆形截面最为常用。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条